January 2024 – A Brief History of the Bass Guitar

Prelude

WELCOME FAIR MUSIC‑MINDED PATRONS to the first CRAVE Guitars’ monthly article of the New Year. While we may be less than a full month into the year Two Thousand and Twenty Four of the Common Era, one hopes it is off to a good start despite global uncertainty (and insanity). Let us hope that those intent on geopolitical conflict come to their senses, unlikely as it may seem, rather than escalate tensions further. I don’t know about you but I don’t want to be part of the doomsday generation. Scary.

Bellum omnium contra omnes (the war of all against all)” – Thomas Hobbes (1588‑1679)

Getting back to the musical point, ask pretty much anyone with a slight interest in modern music culture, the question, “Who invented the first bass guitar?” and I’m sure a lot of people would say, “Leo Fender, of course”. Well yes… and no. In the world of vintage guitars, things are rarely quite as straightforward as one may at first think.

With the recent addition of CRAVE Basses to the CRAVE Guitars, Amps and Effects family, this month seems perfectly apt to take a quick look at how the electric bass guitar as we know it came into being and how it has become such an integral component of contemporary music.

Primarily as a guitarist, my dalliances with bass guitars up to now have, I admit, been spawned out of curiosity and exploration, rather than a serious preoccupation. Those dalliances, though, span well over four decades, so the bass encounter isn’t a single, short or recent ‘event’.

We do not start the story, as many might imagine in the 1950s. We’ll come back to that in a little while. Before we get there, though, we should go back quite a few years. Many, many years in fact, starting with the classical orchestral double bass, originating from the 15th Century or thereabouts. Then we’ll explore the modern‑day innovations starting in the 1920s and 1930s before the ‘big bang’ that really exploded in the 1950s and 1960s. Finally we’ll come up‑to‑date, with a look at the instruments, equipment, artists and sounds that have helped to shape the modern musical landscape. Finally, we’ll take a wee peak into the near future of bass instruments.


The fretless acoustic double bass

Before the solid body fretted electric bass guitar, popular music relied almost totally on the acoustic upright double bass for low frequency impact. The instrument’s origins date approximately to the 15th‑16th Century in Venice, Italy. Venetian musician, Silvestro Ganassi developed a ‘bass viola da gamba’ in 1542, widely regarded as the forerunner of today’s double bass. It wasn’t until around 1700, though, that the double bass became part of the opera orchestra. The double bass as we now know it is the largest and lowest‑pitched chordophone in the classical music orchestra.

As a quick recap, defined by the Hornbostel‑Sachs system of musical instrument classification, a chordophone is a musical instrument that makes sound from vibrating one or more taught strings by bowing, plucking or striking the strings. Examples of chordophone types include violins, guitars, and pianos respectively. The word chordophone stems from the Greek words for string (chordē) and sound (phonē).

For more on the historical origins of musical instrument classification (to provide a context for the development of the guitar), see CRAVE Guitars’ March 2018 article.

A Potted History of the Guitar Part I (The ancient world up to the early Renaissance):
March 2018 – A Potted History of the Guitar Part I (craveguitars.co.uk)

The traditional 4‑string double bass is usually played in one of two ways, either by rubbing the strings with a bow (arco) or by plucking the strings with fingers (pizzicato). Some modern double bass players, for instance in rock & roll and rockabilly, also use a distinctive ‘slap’ technique. This percussive sound derived from the ‘Bartók pizzicato’ (‘snap’ pizzicato) named after the Hungarian composer and pianist Béla Bartók.

Double Bass (courtesy of Roxanne Minnish)

Depending on the style of music, the double bass is also known by a number of other names, all of which refer to the same instrument. Some of these alternative monikers include bass, upright bass, string bass, acoustic bass, acoustic string bass, contrabass, contrabass viol, bass viol, bass violin, stand‑up bass, bull fiddle, doghouse bass and bass fiddle.

The traditional double bass is a large acoustic fretless instrument of the violin family that is played upright. The deep, resonant, woody tone of the double bass endows it with a very different sound when compared to the modern solid body fretted electric bass guitar. The tuning of the double bass is different from other members of the orchestral sting instruments, in that it is tuned in fourths (E‑A‑D‑G) rather than a violin’s fifths (G‑D‑A‑E). The double bass, then, is tuned the same as a modern bass guitar, an octave below the bottom four strings of a 6‑string guitar in standard tuning. This particular characteristic aided the bass’s transition from classical to modern day musical styles.

Originally, double basses were more likely to have three strings until four strings became commonplace by the 19th Century, by which time the standard format and construction of the double bass had become established. There are, however, 5 and 6 (or more) string variants and there are also various alternative tunings.

The double bass has been the mainstay of orchestral string sections and chamber music for several centuries in one form or another. It was predictable that, with the emergence and evolution of the major modern popular music genres, such as jazz, blues and country & western that the double bass would become the go‑to bass instrument, at least up until the 1960s when the solid body fretted electric bass guitar became predominant. However, the double bass hasn’t disappeared from contemporary music completely. Plenty of present‑day artists still use or revert back to the double bass for authenticity and/or effect.

The main drawback experienced by many players is that the double bass is a substantial piece of equipment. The full‑size double bass is almost 75 inches (190cm) tall, weighing in at c.20‑25lbs (9‑11½kg), without its hefty case. The scale length is set at around 42” (107cm), much longer than most modern bass guitars. Given these dimensions, the double bass is sizeable, cumbersome, unwieldy and plain heavy, making it far from the easiest of instruments to move around or play. There are smaller double basses including ¾, ½ and ¼ size, mainly aimed at younger players. Even so, the double bass not for the faint hearted, as the smallest ¼ size instrument is still over 61” (156cm) tall.

Another drawback is the double bass’s acoustic construction. Like the acoustic guitar, in the first half of the 20th Century, the acoustic double bass’s lack of volume made it hard to be heard in a jazz‑era big band mix unless there was some form of electrification through either a magnetic pickup or a microphone connected to an amplifier and, even then, acoustic instruments can be prone to feedback in high sound pressure level environments.

Traditional double basses are not only large but, because of their construction, they are also quite expensive, making them a major investment and therefore difficult for novices or younger players to access and learn.

Even so, despite its limitations, during the 20th Century the double bass became widely used in a diverse range of modern music genres, including jazz, blues, swing, rock & roll, rockabilly, country & western, bluegrass, folk, funk, reggae, metal, rock, pop, tango and visual media soundtracks.

Trivia: Believe it or not, there is an even larger bass, first built c.1850 by the French luthier Jean‑Baptiste Vuillaume (1798‑1875) in Paris. The octobass, as it is called, has three strings and is basically a larger version of the double bass tuned a further octave down. The octobass is a truly gargantuan beast, approximately 137” high (348cm).


The electric upright bass

To enable modern players to experience the spirit of the acoustic double bass in a more convenient and amplified form, there is the modern Electric Upright Bass (EUB), which is also played, as its name suggests, upright, like a traditional double bass.

EUBs allow for greater portability while retaining the playing style and general sound of its forebear. As the EUB doesn’t require the substantial acoustic resonating chamber of a double bass, they often feature a ‘skeleton’ body, making it much smaller, lighter and cheaper to produce. The minimal structure may have either a solid body or a small acoustic body.

A magnetic, piezo or condenser bass pickup provides the means to route the signal via a bass amplifier to loudspeakers. Like a double bass, the EUB’s strings can be bowed or plucked, although that is dependent on fingerboard and bridge radius. While evoking its acoustic origins, the structural and electric characteristics of the EUB endow it with a unique sound all of its own.

As the EUB’s construction isn’t bound by convention like its orchestral sibling, the flexible format allows for a range of scale lengths to be employed from around 30” (76cm), through 34” (86cm) like a long scale bass guitar to the full 42” (107cm) of a double bass, making it much more accessible to a range of players. Almost all EUB necks allow for a full two‑octave range and most but not all are fretless. Compared to the double bass or the electric bass guitar, the electric upright bass tends to be a modern, notable but relatively niche instrument. There are EUB models at all price points, making it easier for novices and experienced players alike.

The first production electric upright basses were developed independently in the mid‑1930s by Regal (Electrified Double Bass), Vega (Electric Bass Viol), Rickenbacker (Electro Bass‑Viol) and Audiovox (bull fiddle – see below). Gibson introduced their special order Electric Bass Guitar in 1938, which was still an upright fretless instrument with a hollow body and a magnetic pickup.

Manufacturers of electric upright basses include Framus, Ampeg, Warwick, Ibanez, Yamaha, Palatino, NS Design (Ned Steinberger), and Harley Benton.

Electric Upright Bass

The first solid‑body fretted electric bass guitar

As hinted at above, while Leo Fender was the major innovator associated with the solid‑body fretted electric bass guitar, he wasn’t the first. He was beaten to the starting post by at least some 15 years. Hardly a photo finish!

The first indication of the possible future of a bass guitar was in 1924 when the legendary Gibson designer, Lloyd Loar came up with a prototype electric bass. The Loar concept focused on the body, pickup and strings but with little additional detail. Loar’s radical design was rejected by Gibson management at the time. Loar left Gibson shortly thereafter in 1924, so his visionary ideas for an electric bass guitar went no further.

Nearly a decade later, around 1933, American musician and inventor Paul H. ‘Bud’ Tutmarc (1896‑1972), based in Seattle, Washington, began experimenting with reducing the size of the double bass to a more manageable instrument. Tutmarc originally devised an electrified fretless double bass‑style instrument described as an electric 4‑string upright ‘bull fiddle’, slightly smaller than a cello.

It’s worth a quick diversion to go back in time to take in an original report from the ‘Seattle Post‑Intelligencer’ newspaper, which published the story on 17 February 1935. The headline read, “Pity Him No More – New Type Bull Fiddle Devised.”

The article went on to state that, “People have always pitied the poor bass-fiddler… who has to lug his big bull-fiddle home through the dark streets after the theatre closes. But he doesn’t have to do it anymore. Because Paul Tutmarc, Seattle music teacher and KOMO radio artist, has invented an electric bull-fiddle. One you can carry under your arm. And it doesn’t even need a bow, either. You pluck a string – and out of the electric amplifier comes a rich, deep tone, sustained as if five or six bass violinists were bowing five or six bass‑violins with masterly artistry. The tone is sustained as long as you want it, too, without a bow.” The instrument described in the article was a cello‑like upright fretless instrument with an electromagnetic pickup.

Tutmarc was, however, about to do something far more radical. By 1935-1936, Tutmarc, had changed direction and developed the first solid body fretted electric bass guitar, pretty much recognisable in its modern form. It was this version of Tutmarc’s bass that was intended to be played horizontally, rather than upright, in a similar way to the modern bass guitar. The 1935 sales catalogue for Tutmarc’s company Audiovox featured his ‘Model 736 Bass Fiddle’, a solid‑bodied electric bass guitar with four strings, a fretted neck, with a 30½” (775mm) scale length, an ebony (or purpleheart) fingerboard with 16 frets, a black walnut body, a hidden single Tutmarc‑Stimpson horseshoe pickup below a mirror-steel faceplate, and a single volume control.

Tutmarc AudioVox Model 736

In addition, as an electric bass guitar would be pretty much useless without the means to amplify the sound, Audiovox also sold an accompanying ‘Model 936’ bass amplifier with 18 watts of power and a 12” Jensen Concert speaker.

Around 100 of the Model 736 Audiovox bass guitars were made in the mid‑1930s. However, there are only thought to be three Model 736 Tutmarc bass guitars still in existence today, making them remarkably rare. One belongs to the Experience Music Project (EMP), now known as The Museum of Pop Culture (MoPOP), a non‑profit enterprise founded by Microsoft co‑founder Paul Allen in 2000 and based in Seattle, Washington state, USA. In 2018, a 1936 Audiovox Model 736 bass guitar was reportedly sold by Tutmarc’s grandson on eBay for $23,850.

Sadly, for Tutmarc, the Audiovox 736 was not a commercial success. The price tag was high for the mid‑1930s, in a country still severely affected by The Great Depression (1929‑1939). The 736 bass fiddle originally cost $65 and the matching 936 bass amplifier cost $75, placing it well out of reach for many musicians. The high price and the radical concept didn’t attract enough musicians at the time and it wasn’t long before it was discontinued and was subsequently forlornly forgotten to history. Tutmarc’s company, Audiovox folded in 1950.

It can well be argued that Tutmarc was ahead of his time. Perhaps it is a case of supply looking for a demand that consumers didn’t know they needed. Maybe it was bad timing and/or bad luck. The Model 736 also arrived shortly before the outbreak of World War II when the guitar manufacturing industry was deemed ‘non‑essential’ and resources were diverted to the American war effort. Furthermore, a bass guitar didn’t seem to fit seamlessly into any of the prevailing musical styles at that time.

It is surprising, though, that such a significant innovation in guitar history isn’t more widely known about. Perhaps it is time, nay overdue, for Tutmarc’s milestone achievements to be deservedly recognised.

One company, Luthiery Laboratories, makes modern‑day replicas of the Audiovox 736, keeping the spirit of the original instrument alive.

Audiovox 736 Bass (1/4) ~ Luthiery Laboratories (luthierylabs.com)


The first commercially successful mass produced solid body fretted electric bass guitar

And so it was that the scene was set for someone else to step in and make the bass guitar ‘a thing’. That someone else was Clarence Leonidas Fender (1909‑1991). Unlike poor old Paul H. Tutmarc, you may just have heard of him.

“I wonder if I could make an electric bass” – Leo Fender (1909‑1991)

For more on the history and development of Fender guitars and musical equipment, see CRAVE Guitars’ August 2018 article for the context behind Fender solid body electric guitars.

A Potted History of the Guitar Part VI (1950s and 1960s):
August 2018 – A Potted History of the Guitar Part VI (craveguitars.co.uk)

Once the proverbial ball started rolling, the bass guitar had a phenomenal, transformative and relatively rapid impact on modern music that cannot be underestimated or understated. It is also very easy to take the electric bass guitar’s presence on stages, in studios and bedrooms all around the world for granted. Back in 1950, though, no‑one other than a select few in Fullerton, California had any idea of what was to come.

So… what are we actually talking about? The answer, after the lengthy preamble (apologies for keeping you on tenterhooks for so long), is the mighty Fender Precision Bass. Three little words. Game changing, era defining and well‑deserving of all the hyperbole attached to it over the past seven‑plus decades. So much has been written about the Precision that there is little need to dredge up the detail again, so what follows is a brief overview.

Leo Fender was working on a prototype back in 1950, bringing the world’s first commercially successful mass‑produced electric bass guitar to market in 1951. Fender designed the Precision Bass (often shortened these days to P‑Bass) to overcome the many drawbacks of the acoustic double bass alluded to earlier in this article. Even the name, Precision, referred to the fretted neck to enable musicians to play in tune far more precisely than on the double bass’s fretless neck. Conservative double bass players may well have looked at the Precision Bass in the same way that conservative guitarists looked at the Fender Telecaster, which had been introduced a year earlier in 1950. Consternation and indignation were probably natural initial reactions from the ‘old‑school’.

At its most basic, the Fender Precision Bass is a solid body, 4‑string bass guitar equipped with a single pickup and a one‑piece 20‑fret maple neck with rosewood or maple fingerboard. It all sounds so very straightforward and unremarkable nowadays doesn’t it?

The Precision Bass didn’t, however, appear fully formed. The original design of the Precision borrowed several design features from the Telecaster guitar, other than the double cutaway body. Initial models carried one single coil pickup, a slab body, large scratchplate and a Tele‑like headstock.

After Fender introduced the Stratocaster guitar in 1954, some of its design features were brought over to the Precision including a contoured body and a Strat‑like headstock. The original pickup was replaced with a single split coil hum cancelling staggered design and a sleeker redesigned scratchplate. It is this version of the Precision from 1957 that has stayed in production largely unchanged to the current day. There have been many, many variants with numerous changes in specification over the years, including a fretless version (ironically, given the origin and intention of the Precision’s name). 5‑string versions, 22‑fret necks, active electronics, multiple pickups, etc. followed.

The original pre‑1957 Precision design has been re-issued by Fender at times over the years, often called the Telecaster Bass to differentiate it from the post‑1957 Precision specification.

The popularity of the Fender Precision Bass grew significantly throughout the 1950s especially with rock & roll and country fraternities, as well as with session musicians. During the 1960s the solid body fretted electric bass guitar became dominant in most modern musical genres. During the early days, there wasn’t a great deal of choice in terms of alternatives to the Precision but that was to change later on.

1977 Fender Precision Fretless Bass

Fender capitalised on their supremacy by introducing the solid body fretted electric Fender Jazz Bass in 1960 (originally called the ‘Deluxe Model’). The svelte Fender Jazz Bass (often now shortened to J‑Bass) was designed to appeal to a different customer base. Like the offset bodied Fender Jazzmaster guitar, it was aimed squarely at the dyed‑in‑the‑wool jazz community. However, like the Jazzmaster, the Jazz Bass’s appeal spread far wider than jazz musicians. Like the Precision, the Jazz Bass has rightly become an iconic industry standard solid body electric bass guitar.

Throughout the years, both the Precision and Jazz Bass have featured sizeable chrome covers over the pickup and the bridge, despite these items limiting playing techniques such as palm muting the strings. As the covers are purely aesthetic, rather than functional components, it is fair to say that the vast majority of musicians removed these covers permanently.

Without doubt, the Fender Precision Bass and its younger sibling the Jazz Bass are icons of contemporary music and remain hugely popular today. Consumers can purchase genuine P‑Bass and J‑Bass models from the budget Fender‑owned offshore‑produced Squier brand, through Mexican and American‑made Fender models, to the high‑end Fender Custom Shop versions. Throughout the decades, the Precision and Jazz Bass models have oft been imitated and/or blatantly copied by other manufacturers, eager to cash in on Fender’s industry‑dominant status.

Understandably, over the years, the Precision and Jazz Bass have become highly collectable, especially the earliest models. The highest vintage market prices undoubtedly belong to the models from 1951 (Precision) and 1960 (Jazz Bass) to 1965, when Leo Fender sold his company to industry giant CBS. Fender equipment from this period is known as ‘pre‑CBS’.

For more information on the Fender Precision and Jazz Bass, just complete any Internet browser search and, alongside a great deal of drivel, there is a massive volume of fact and opinion available, often described in forensic detail.

1989 Fender Jazz Bass American Standard Longhorn

Evolution of the electric bass guitar

It is probably fair to say that, since 1951 and the introduction of the Fender Precision Bass, other brands were in the position of having to play catch up. In particular, Fender’s biggest competitor, Gibson, was wrong‑footed and they have never been able to compete on a level playing field. In 1953, Gibson released the EB‑1, which was a violin‑shaped solid mahogany body bass with a set neck. The EB‑1 didn’t catch on and was replaced by the semi‑acoustic ES‑335‑shaped EB‑2 in 1958, the SG‑shaped Gibson EB‑0 in 1959 and the EB‑3 (made famous by Jack Bruce of Cream) in 1961. While the semi‑acoustic EB‑2 proved popular, its Epiphone‑branded counterpart, the Epiphone Rivoli proved more successful. All these early Gibson basses used a shorter 30½” scale. In 1959, Gibson also released a hollow body EB‑6 6‑string bass.

Possibly Gibson’s best contender for an iconic bass guitar is the Gibson Thunderbird, originally introduced in 1963. The Thunderbird was based on Gibson’s Firebird guitar, designed by legendary American car designer Raymond Dietrich (1894‑1980). The Thunderbird was the first Gibson solid body bass to use the 34” scale made popular by Fender. Like the Firebird, the Thunderbird was redesigned in a simpler ‘non‑reverse’ form for 1966 and the original ‘reverse’ shape wasn’t reissued until the mid‑1970s. During the 1970s, Gibson also released the Ripper and Grabber basses but neither really captured bass players’ imaginations (or their precious dollars!). Later additions like the Gibson Triumph, Victory and RD basses didn’t fare much better as viable competition for Fender’s stalwarts. Epiphone have Thunderbird and EB basses in their line‑up alongside Epiphone‑specific basses such as the Newport and the Embassy.

Over at Danelectro in Neptune, New Jersey, Nathan Daniel launched the world’s first 6‑string bass, the UB‑2 in 1956 comprising a single cutaway semi‑hollow bass with a 30” scale, 24 frets and dual single coil pickups, earning its nickname the ‘Tic Tac bass’. In 1958, Danelectro replaced the UB‑2 with two new 6‑string bass models. The first was the Long Horn 4623 bass with a radical new lyre‑like design 24 frets, and a short 25” scale. The other was the Short Horn 3612 with stubby double cutaways, 29½”scale and only 15 frets. All Danelectro models substantially undercut the retail prices of both Fender and Gibson’s basses. The 6‑string models seemed to attract guitarists rather than bass players to their designs, providing a novel bridge between guitar and bass camps.

It should be noted at this point that older 6‑string basses are generally tuned an octave below a guitar in standard tuning, to E-E, while the baritone guitars that were appearing at the time were tuned either to B‑B or A‑A. On the other hand, modern 5‑string basses simply add a lower B string while modern 6‑string basses tend to add lower B and higher C strings compared to an equivalent 4‑string bass. Confused?

Meanwhile, back in the 1960s, Fender weren’t resting on their laurels. Following the popularity of the ‘student’ Mustang guitar, Fender introduced the short scale Mustang Bass in 1966. The Mustang Bass spawned two later variants, the Bronco Bass (introduced in 1967) and the Musicmaster Bass (introduced in 1971). Fender also released two esoteric ‘bass’ guitars, the Fender Bass V (introduced in 1965), which was the world’s first 5‑string bass guitar and the 6‑string Bass VI (introduced in 1961). The latter was strongly influenced by the Fender Jaguar guitar design. The Bass VI was Fender’s upmarket response to the Danelectro 6‑string bass introduced 5 years earlier. The Bass VI is unique in having 3 pickups, 6 lighter gauge strings, a short 30” scale, a floating bridge and a mechanical vibrato as used on the Jazzmaster/Jaguar guitars, as well as a removable string mute. To compete with the Gibson EB‑2 and Epiphone Rivoli thinline semi‑acoustic basses, Fender introduced the hollow Coronado Bass in 1966.

In addition, the ‘other’ Californian company, Rickenbacker, run by F.C. Hall at the time, also wasn’t going to be left on the side‑lines in the bass department. Rickenbacker had hired Roger Rossmeisl (1927‑1979) who designed the brand’s key guitars and the 4000 series basses. The Rickenbacker 4000 bass with its distinctive cresting wave body outline and thru‑neck construction was launched in 1957. Subsequent models were named 4001, 4002, 4003, 4004, all being variants of the same basic instrument. There isn’t enough space to go into the specification differences here.

Rickenbacker 4001

A decade after Leo Fender left the company that still carries his name today, Music Man was formed in California and released Leo Fender’s vision for the next evolution of his era defining bass guitars. The Music Man Stingray Bass was released in 1976 with a single large bridge humbucker, distinctive 3+1 headstock, innovative on‑board active electronics and an integral string mute. While Music Man’s guitars never caught on at the time, the Stingray Bass has joined Fender and Rickenbacker as an iconic design for many bass musicians. The Stingray Bass was especially popular for funk slap‑style bass technique for the likes of Louis Johnson of the Brothers Johnson.

1978 Music Man Stingray Bass

There are a few other notable basses, such as the German Höfner ‘violin bass’, the 500/1, made famous by Paul McCartney of The Beatles. This model, introduced in 1955, with its carved solid spruce top and humbucking pickups, is often nicknamed the ‘Beatle Bass’. Beyond the Beatles connection, though, the 500/1 remains a relatively minor entry in the bass stakes, while the company’s only other notable entry being the Höfner Club and Verythin basses.

Another oddity to mention at this point is the Swedish Hagström H8, unique for being the world’s first mass‑produced 8‑string bass, with four pairs of strings on a short 30” scale. The H8 was only produced briefly from 1967‑1969.

Throughout the 1960s, 1970s and 1980s a plethora of other companies jumped on the bandwagon, eager to make the most of the massive increase in demand as rock, pop and other genres proliferated. Many of the basses produced during this time were flagrant facsimiles of the best‑selling American brand models, often by Japanese companies (now termed ‘lawsuit‑era’ copies). Other companies like Warwick in Germany were making their own headway with their successful original‑design Thumb and Streamer basses.

Today (2024), Fender arguably still rules the roost with basses covering all bases (sic!) from budget to elite models. All other brands stand firmly in Fender’s enviable shadow. While Fender may dominate, there are now plenty of alternative options. There are some incredible bass guitars out there, some of which are listed later in this article for those that want to diverge from the predictable industry standard ‘Fender sound’. There are numerous ways to deviate from the common path, with different brands, string/pickup configurations, electronics, scale lengths, body construction, etc. The quality of budget instruments is vastly superior to anything available in the past and provides a strong basis (again, sic!) for players seeking to learn and develop their skills.


The acoustic bass guitar

While the solid body electric bass guitar finally took the world by storm from the 1950s and 1960s, the acoustic bass guitar has proved to be another modern, notable and niche instrument. The first (largely unsuccessful) attempts at acoustic bass guitars began to appear in the 1950s as a logical extension to its electric counterpart.

Historically, one of the earliest acoustic bass‑like instruments was the Mexican guitarrón, which has its roots in the 16th Century and is widely used in Mexican Mariachi bands. While looking similar to a guitar, these huge instruments were either 6‑string or 12‑string acoustic instruments, tuned in A‑D‑G‑C‑E‑A.

In 1972, Ernie Ball introduced the Earthwood acoustic bass guitar, stating that “…if there were electric bass guitars to go with electric guitars then you ought to have acoustic basses to go with acoustic guitars.” A simple yet ‘blindingly obvious’ observation, given the benefit of hindsight. Ernie Ball took a guitarrón, being the nearest thing to an existing acoustic bass guitar, and created a more practical instrument for guitar‑centric American consumers. The Earthwood was relatively short‑lived but the foundation of the acoustic bass guitar was established. American company Washburn took the concept and created more successful instruments that coincided neatly with MTV’s Unplugged concert series (1989‑1999). Interestingly, despite starting it all, Ernie Ball does not have an acoustic bass guitar available to buy at the time of writing.

Acoustic bass guitar construction is essentially similar to the steel‑strung flat top acoustic folk guitar, with a larger hollow wooden body and a longer scale neck. Most acoustic basses have four strings, tuned in the same way as an electric bass, E‑A‑D‑G, an octave below a standard guitar. The majority of acoustic basses have fretted fingerboards, although some are fretless.

Acoustic Bass Guitar

Like many modern day acoustic guitars, many acoustic bass models have pickups to enable them to be amplified for stage use or DI’d for recording purposes. Some instruments are thinline electric semi‑acoustic basses while others are full‑depth electro‑acoustic basses. These are designed primarily as acoustic basses with an on‑board pickup for additional amplification when needed.

Today, there are any number of acoustic bass guitars on the market for every level of player and every price point from many key manufacturers including, amongst others; Martin, Taylor, Guild, Fender, Takamine, Ovation, Tanglewood, Epiphone, Warwick, Epiphone, Washburn, Godin, ESP, Breedlove, Larivée, Framus, Hohner, Ozark, Dean, D’Angelico, Ibanez, Sigma, Alvarez and Cort.


Bass guitar amplification

In the early days of bass guitars, brands released bass amplifiers to accompany their instruments, often sold as a package (see Tutmarc’s Audiovox above, for example). Other brands like Rickenbacker did the same in the early days. The main difference between guitar amps and bass amps is that the latter are tuned specifically to reproduce bass frequencies accurately. A standard 4‑string bass guitar produces low frequencies in the range 41Hz to 100Hz with overtones extending up to 4‑5kHz (not dissimilar to an acoustic double bass in fact).

In terms of sound pressure levels, bass frequencies need more power to be heard by the human ear/brain at the same volume as higher frequencies, so bass amps tend to have higher power ratings than guitar amps. In the past, speakers for bass also tended to be larger with 12”, 15” or even 18” to shift the amount of air needed at lower frequencies. In contrast, guitar speakers tended to be 10”or 12”. Bass speaker cabinets, especially those with multiple speakers, normally had sealed or ported enclosures to increase volume. For all these reasons bass amplifiers and speaker cabinets tend to be different to their guitar equivalents.

Probably the most famous brand associated specifically for its bass amplification is the American company Ampeg, founded in 1946 and now under the ownership of Japanese giant, Yamaha. Ampeg started out attempting to amplify the acoustic double bass in 1949 by using a microphone/pickup in the instrument’s stand. The ‘Amplified Peg’ as it was called was then shortened to ‘Ampeg’ and the rest, as they say, is history. Their most famous range of amps was the 300W Ampeg SVT from 1969 and their bass combo amps, the B‑15 from 1960, as used by the likes of Motown session bass player James Jamerson.

It was no surprise that Fender, the leader in the world of bass guitars from the 1950s should also produce bass amps/cabs. Perhaps the most famous Fender bass amp was the Bassman from 1952 onwards, first introduced as a combo valve amp with a 15” speaker. The most desirable though, was the Dual Rectifier Bassman valve combo with 4×10” speakers. From 1960. Fender also released a ‘piggy back’ amp head and speaker cabinet design to cope with higher power levels and to provide flexibility. From 2000, Fender released a solid state version of the legendary Bassman amp. The original valve Bassman also became beloved by many guitar players for its tone, for instance by the late blues rock guitarist, Stevie Ray Vaughan (SRV).

Student bass players also needed a bass amp. So Fender introduced the Musicmaster Bass amplifier in 1970, as a companion to the Fender Musicmaster Bass guitar. The Musicmaster Bass combo amp was a very simple affair with one channel, 12W of power, volume and tone controls and a single 12″ Fender speaker. Like the Bassman, it has latterly been enjoying a bit of a revival as a budget vintage amp for guitarists. The Musicmaster Bass amp was discontinued in 1982 after the introduction of the Fender Studio Bass combo and Japanese Fender Sidekick Bass 30. Nowadays, the extensive Fender Rumble series has proved very popular with bass players.

Legendary British amplifier company Marshall was not going to be left behind. Marshall’s first 100‑watt bass head was the JTM 45/100 / JTM 45 Super 100 model. Another, also dating from the second half of the 1960s, is the JMP #1992 Super Bass 100 (100W) and JMP #1986 Bass (50W). Like the Fender Bassman, the Marshall Super Bass 100W also proved popular with guitarists. Bass players were also known to use the Marshall #1963 Super PA (50W) and Marshall #1968 Super PA (100W) amps.

Another legendary British amplifier company, VOX produced bass versions of its AC‑15 and AC‑30 combo amps. These were followed in 1963 by the VOX T‑60 and Foundation amps, the latter promoted by Bill Wyman of the Rolling Stones.

German acoustic amp company AER also produce a range of bass amps, particularly well‑suited to amplifying acoustic and electro‑acoustic bass guitars.

Bass guitarists turn out to be a little less conservative than their guitarist counterparts, especially when it comes to amplification and speaker cabinets. For instance there are plenty of modern‑day bass amps that use efficient solid state D‑class amplification (a type of amplifier that uses digital switching technology to amplify audio signals efficiently), with very high power ratings – 500W and 600W or more being not uncommon. Bass amps often also make wide use of sophisticated on‑board EQ. Speaker cabinet configurations also tend to be more versatile with reflex ports, horns, tweeters and combining multiple speaker types being common.

There are many other valve, solid state or hybrid bass amplifier manufacturers not mentioned above, including Trace Elliot, Ashdown Engineering, Mesa/Boogie, Peavey, Music Man, Hiwatt, Laney, Sound City, H/H, WEM, Hartke and Orange.


Bass guitar effects

Things have changed a great deal over the decades since 1951. In the early days of the solid body electric bass guitar, most players plugged straight into their amps without much in the way of tone augmentation.

By the 1970s and 1980s bass players had a paucity of effects specially designed for their instruments, so they generally adopted guitar effects with just a few bass‑specific pedals to choose from. Since the industry started to migrate to digital technology from the 1980s onwards, the major effect companies began to produce pedals designed primarily for use with bass guitars. Now, in the 2020s, there is plenty of choice with most of the big players in the effect industry now making bass‑specific effect pedals, including Electro‑Harmonix, MXR, BOSS, Ibanez, Fender, Laney and Ampeg.

In addition, from around the start of the new millennium, a number of manufacturers turned their ideas for integrated multi‑effect units into practical musicians’ tools that became popular for both guitar and bass, including BOSS, VOX, Zoom, Tech 21, Behringer and Valeton.

In 1998, Line 6 introduced a ground‑breaking innovation called the POD, which put many guitar effects, amps and cabinet emulations into a single portable unit. While the little red kidney shaped POD was initially directed at guitarists, the rack mounted Line 6 POD Pro models came in both guitar and bass versions. Since then, Line 6 and other manufacturers now combine guitar and bass amp/effect/cabinet emulations into a single unit. These units are constantly improving and are gradually replacing stage backlines with direct input (DI) into PAs/monitors, as well as into studio desks/DAWs. Along with the POD, Line 6, also now part of Yamaha, is still in the same business with their extensive Helix range.

Alternatives to the Line 6 POD and Helix units include the Axe-Fx III from Fractal Audio, which is a pro‑level amplification/effects processor suitable for both guitar and bass. Meanwhile, Kemper Amps took a slightly different route with their Profiler, which has all‑in‑one effects, amplifier and speaker cabinet profiles designed for both guitar and bass.

Just to finish off, there are numerous boutique effect pedal manufacturers that produce stomp boxes, often to very high degrees of quality, including brands such as Way Huge, TC Electronic, EarthQuaker Devices, Darkglass, Aguilar, Origin Effects, Free The Tone, Providence, Source Audio, Walrus Audio, ZVEX, Mooer Audio, Sansamp, Digitech, Eventide, Strymon, JHS, Keeley and Empress Effects.


Iconic (and other) bass guitars

The next sentence is likely to be highly provocative and intentionally so. While there are innumerable bass guitar models out there from 1951 to the current day, there are probably only four bass guitar models that can truly be called iconic (i.e. something that is widely considered to epitomize an era, culture, community or place). The four key instruments – none of which are based on guitar equivalents – that stand head and shoulders above the rest are:

Truly iconic bass guitars:
Fender Precision Bass (1951‑date)
Fender Jazz Bass (1960‑date)
Rickenbacker 4000 series (1957‑date)
Music Man Stingray Bass (1976‑date)

In addition, below are listed just a very few of the other great electric bass guitars manufactured from 1951 onwards. This is far from a comprehensive list and is intended only to be broadly indicative of the type.

Fender bass guitars:
Fender Bass V
Fender Bass VI
Fender Coronado Bass
Fender Mustang Bass
Fender Musicmaster Bass
Fender Performer
Fender Telecaster Bass
Squier Bronco Bass

Gibson bass guitars:
Gibson EB series
Gibson Thunderbird
Gibson Explorer Bass
Gibson Melody Maker Bass
Gibson Grabber/Ripper/G3
Gibson RD series
Gibson Triumph
Gibson Victory
Gibson 20/20 Bass

Epiphone bass guitars (not including Epiphone versions of Gibson basses):
Epiphone Embassy
Epiphone Newport
Epiphone Rivoli
Epiphone Viola

Other American brand bass guitars:
Alembic Series 1/2
Ampeg Dan Armstrong Lucite
Ampeg AEB-1
BC Rich Eagle
BC Rich Mockingbird
BC Rich Warlock
Danelectro Longhorn 4623
Danelectro Shorthorn 3612
G&L JB2
G&L L1000/L2000
Gretsch 6071/6072
Gretsch G2220 Junior Jet
Gretsch 5440 Electromatic
Guild B-301/B-302
Guild Starfire
Harmony H22
Harmony H27
Jackson JS
Kramer 450-B/650-B
Kramer DMZ
Lakland Skyline
Music Man Sabre
Music Man Sterling
National Val Pro Model 85
Ovation Magnum
Peavey T-40
Peavey Millennium/Milestone
PRS SE Kestrel/Kingfisher
Schecter Omen
Schecter Stilletto
Silvertone 1440 series
Steinberger Spirit XT
Steinberger Synapse
Supro Pocket
Travis Bean TB2000
Washburn Taurus

European bass guitars:
Burns Sonic
Hagström H8
Höfner Club
Höfner HCT-500/1
Höfner President
Hohner B2
Hohner The Jack
VOX Clubman
VOX Cougar
VOX Phantom 4
VOX Sidewinder
VOX VBW Teardrop Bass
Wal Mk1/Mk2
Warwick Thumb/Streamer/Infinity/Corvette
Warwick Rockbass

Japanese bass guitars:
Other than perhaps the Yamaha BB and TRBX series, and the Ibanez SR and TMB series, Japanese bass guitars do not have the same level of brand/model heritage when compared to those produced by American and European companies. There are, however, many Japanese basses produced by companies such as Ibanez, Tokai, Greco, Jedson, Westone, Teisco, ESP/LTD, Fernandes and Aria.

“Without the Fender bass, there’d be no rock n’ roll or no Motown. The electric guitar had been waiting ’round since 1939 for a nice partner to come along. It became an electric rhythm section, and that changed everything.” – Quincy Jones (1933‑)


Famous bass players

Below are listed seventy of the world’s most famous and influential bass players – alive and departed – including upright double bass and electric solid body bass guitar players. There are, of course, many, many more but this is an indicative list for those interested in exploring some of the music created by these diverse musicians (in alphabetical order):

Aston ‘Family Man’ Barrett (Bob Marley & The Wailers)
Walter Becker (Steely Dan)
Andy Bell (Oasis)
Bill Black (Elvis Presley)
Jack Bruce (Cream)
Cliff Burton (Metallica)
Geezer Butler (Black Sabbath)
John Cale (Velvet Underground)
Stanley Clarke (Return To Forever, solo)
Adam Clayton (U2)
Bootsy Collins (James Brown, Parliament/Funkadelic)
Tim Commerford (Rage Against The Machine/Audioslave)
Billy Cox (Jimi Hendrix)
John Deacon (Queen)
Kim Deal (Pixies, Breeders)
Willie Dixon
Gail Ann Dorsey (David Bowie)
Bernard Edwards (Chic)
John Entwistle (The Who)
Flea (a.k.a. Michael Peter Balzary – Red Hot Chili Peppers)
Bruce Foxton (The Jam)
Simon Gallup (The Cure)
Roger Glover (Deep Purple)
Kim Gordon (Sonic Youth)
Larry Graham (Sly & The Family Stone)
Marshall Grant (Johnny Cash)
Steve Harris (Iron Maiden)
Dusty Hill (ZZ Top)
Peter Hook (Joy Division, New Order, The Light)
Glenn Hughes (Deep Purple)
Jah Wobble (a.k.a. John Joseph Wardle)
James Jamerson (session musician)
Louis Johnson (The Brothers Johnson)
John Paul Jones (Led Zeppelin)
Carol Kaye (session musician)
Lemmy Kilmister (Hawkwind, Motörhead)
Mark King (Level 42)
Alan Lancaster (Status Quo)
Geddy Lee (Rush)
Phil Lesh (Grateful Dead)
Tony Levin (Peter Gabriel)
Jenny Lee Lindberg (Warpaint)
Phil Lynott (Thin Lizzy)
Glen Matlock (Sex Pistols)
Paul McCartney (The Beatles, Wings, solo)
Duff McKagan (Guns N’ Roses)
John McVie (Fleetwood Mac)
Marcus Miller (Miles Davis, Herbie Hancock, George Benson)
Charles Mingus
Krist Novoselic (Nirvana)
Pino Palladino (session musician)
Jaco Pastorius (Weather Report)
Guy Pratt (Madonna, David Gilmour)
Suzi Quatro
Dee Dee Ramone (Ramones)
Noel Redding (Jimi Hendrix)
Mike Rutherford (Genesis)
Robbie Shakespeare (Sly & Robbie)
Billy Sheehan (Steve Vai, David Lee Roth)
Gene Simmons (KISS)
Nikki Sixx (a.k.a. Frank Carlton Serafino Feranna Jr. – Mötley Crüe)
Chris Squire (Yes)
Sting (a.k.a. Gordon Sumner – The Police)
Danny Thompson (John Martyn)
Thundercat (a.k.a. Stephen Lee Bruner)
Robert Trujillo (Metallica)
Sid Vicious (a.k.a. Simon John Ritchie – Sex Pistols)
Roger Waters (Pink Floyd)
Tina Weymouth (Talking Heads, Tom Tom Club)
Tal Wilkenfeld (Jeff Beck, Prince)
Bill Wyman (Rolling Stones, Bill Wyman’s Rhythm Kings)

“The gunk takes the funk” – James Jamerson (1936‑1983)


Bass in the (near) future

It is difficult for, and unfair of, me as a guitarist, to predict any sort of unified future for the bass guitar but I’ll give it a shot.

The traditional conservative brigade will still stick to tried and tested instruments and equipment. Musicians looking for something a bit different will probably want to experiment with the format, for instance number of strings, scale lengths, pickups and electronics. If anything there will be more radical and custom bass guitar designs from up‑market and boutique luthiers that diverge from the traditional archetype set by Fender over 70 years ago. Many additions to the form extend the flexibility of the core instrument, so it may be a case of further evolution, rather than revolution.

Bass amplification will continue to diverge from its simple valve origins and continue to embrace the digital realm, probably dispensing with backline amps/cabs altogether with signals being DI’d into desks/PA/monitors.

While bass players haven’t been particularly well served in the past for bass‑specific effect pedals, I anticipate that bass effects will achieve greater representation, including some out‑there effects not currently available to guitar players.

Bass guitar players have struggled to compete, with synthesisers dominating the world of modern electronica, dance and popular music. At least, for now (thankfully), the bass guitar remains essential to most guitar‑based music in a sort of symbiotic, co‑dependent relationship. As long as guitars keep going, so will bass, and vice versa. Bass players, being ever inventive individuals, will adapt and cultivate new ways to keep the instrument relevant, current and in the limelight for decades to come.

Technique‑wise, there will continue to be the traditional approaches towards walking bass lines, typically using the fundamental root/fifth styles that has been the general mainstay of modern music for decades. In contrast, there will be many more amazing virtuoso bass players who see the versatility and potential of the instrument in its own right.

So, other than tangible incremental progress around the margins, there is probably not a whole lot that will change profoundly in the near future. I may be wrong with that last sentence. In many ways, I hope so!

Interestingly, while the upright double bass continues to appear in modern music from time to time, the solid body fretted electric bass hasn’t really made any headway into the clique of conservative classical orchestral music, which still relies heavily on the traditional, some may say archaic, acoustic upright double bass.


Resources

Periodicals dedicated to bass guitar may be the best place to keep up‑to‑date with the technology and equipment associated with the instrument. Publications include Bass Musician Magazine, Bass Player Guitar Magazine, Bass Guitar Magazine, Bass Magazine, Bass Musician and Bass Gear Magazine.

Online resources include Music Radar, TalkBass.com, Basschat and No Treble. There are also many books on bass guitars and bass playing techniques, including the inevitable, ‘Bass Guitar For Dummies’.

As far as purchasing bass guitars, there are the large Internet sites, brick & mortar retailers and the usual online sites, Reverb.com and eBay. For vintage and rare bass guitars, there are outlets purely for basses including (in the UK) Andy Baxter Bass, The Bass Gallery, The Bass Centre, Vintage Bass Room and ClassicandcoolGuitars.


Some final thoughts

I certainly learnt a lot from researching and writing this article. At first sight, there may seem to be quite a bit of relevant information on the Internet. It is only when one starts to dig deeper and attempt to put something together that makes some form of sense that things rapidly become unclear. All of a sudden, much of the available information seems incomplete, contradictory, vague and/or outright erroneous. In the end, it comes down to evidence and corroboration but sorting the wheat from the chaff isn’t always easy. It seems that online information about vintage guitars is far more reliable than that about vintage basses. There are far too many poorly informed people who invent facts and present opinion as truth.

Despite my best attempts to piece things together, I may have fallen foul of the same issues raised above. However, I have tried very hard not to fill in gaps with assumptions and/or fiction. While I endeavour to be thorough and rigorous, my approach isn’t academic and I don’t have the time, funds or energy to provide the last word in scholarly fact. The contents herein should therefore probably not be relied upon too heavily. This article should, for that reason alone, be regarded as my best intention to balance fact with entertainment.

“Believe nothing, no matter where you read it, or who said it, unless it agrees with your own reason and your own common sense.” – Buddha (Siddhārtha Gautama – c.480‑400BCE)

This is just the sort of article that would benefit greatly from images to illustrate and break up the narrative. Sadly as a (broke) not‑for‑profit entity, I cannot afford the costly copyright/royalties charged for the use of relevant images, so I have had to rely on very limited free/public domain resources or my own photographs. I apologise for the thousands of words used to describe what images could do in none. Once again, no AI was used in the research and writing of this tome – only my own hard work.

NB. Apologies to anyone disappointed by the wait for a cheap, clichéd joke at the expense of ‘the bass player’! T’ain’t gonna happen here. Love ‘the bass player’.


CRAVE Guitars’ ‘Album of the Month’

Given that this month’s article focuses on the fascinating history of the bass guitar, it seems only fitting to select an album that demonstrates the virtuoso bass playing of one of the greatest bass guitarists of all time, Jaco Pastorius (1951‑1987) and his famous modified fretless Fender Jazz Bass.

Weather Report – Heavy Weather (1977) – The seventh and most commercially successful studio album by the American jazz fusion band. ‘Heavy Weather’ was the first album with Pastorius on full‑time bass duties. The smooth jazz funk production of the album, which was released at the peak of the punk rock movement in the US and UK, stood in stark contrast to the otherwise brutal sounds of the late 1970s. Given that it sold in huge numbers (and still does) is testament to the composition and musicianship on display. Initial sales were about 500,000 and total sales to‑date are over 1.06 million. Other Weather Report albums may be ‘better’ according to purists but this is the one I heard first and it has stuck with me over the years.

Weather Report – Heavy Weather (1977)

To me, this album hit me right between the eyes about what virtuoso bass playing can be like. There are many, many other artists and albums that could arguably take the acclaim, for instance Stanley Clarke’s successful solo album, ‘School Days’ (1976), but on this occasion, the late, great Jaco (& co.) takes the accolade, such as it is.

“I’m the greatest bass player in the world” – Jaco Pastorius (1951‑1987)


Tailpiece

Well, there you go. I think that most of us love a bit of decent low bass in our music. I hope y’all got something out of this fleeting exploration into the defining instruments, artists and music of the lower registers. I think the narrative works well as a complement to the launch of CRAVE Basses at the end of 2023, but that’s just my (obviously biased) opinion.

I hope you feel inclined to come back next month to see what’s currently fermenting in the CRAVE guitars’ secret brewery.

Truth, peace, love, and guitar music be with you always. Until next time…

CRAVE Guitars’ ‘Quote of the Month’: “Mundanity is the devourer of lost dreams”

© 2024 CRAVE Guitars – Love Vintage Guitars.

Like it? Why not share it?

July 2020 – More Whazzup at CRAVE Guitars

Prelude

HELLO AND WELCOME to the second half of 2020 for what it’s worth. The fact that most of us meek hominids have made it this far is surely a good thing (for mankind, if not the planet), despite the best efforts of coronageddon. At the time of writing there are over 17 million confirmed cases and 667,000 deaths recorded globally due to coronavirus and sadly the numbers are still rising. I hope you are surviving amongst the mercenary madness. Thoughts, as always, lie with those affected directly and indirectly. Also, it is important to recognise the detrimental effects of the COVID pandemic on mental health & wellbeing; the risk of long‑term psychosis is a concern, worse because it cannot be seen and is rarely disclosed as an issue. Civilisation still has some way to go before it can prove resilient to the virus and worthy enough to survive as a species.

Before further ado, let’s move forward to the past. In the last article, I covered the key acquisitions made by CRAVE Guitars during 2019. As signposted last time, this month I’ll be covering the experience of repatriating 42 guitars and basses (40 of them vintage) after an extended period in enforced storage and bringing them back to as good a shape as they can be. None of the guitars covered here were featured in last month’s article, so there is no overlap between the two.

What are we actually talking about here?

As a reminder, here is the full list of the guitars that eventually returned home (by brand/alphabetic order):

Vintage Fender guitars (13):
  • 1966 Fender Coronado II
  • 1965 Fender Duo-Sonic II
  • 1965 Fender Jaguar
  • 1965 Fender Jazzmaster
  • 1965 Fender Musicmaster II
  • 1966 Fender Mustang
  • 1972 Fender Mustang Competition
  • 1977 Fender Stratocaster
  • 1983 Fender Stratocaster ‘Dan Smith’ Era
  • 1988 Fender Telecaster
  • 1974 Fender Telecaster Custom
  • 1973 Fender Telecaster Deluxe
  • 1972 Fender Telecaster Thinline
1966 Fender Coronado
Vintage Gibson guitars (20):
  • 1983 Gibson Corvus II
  • 1963 Gibson ES-330 TDC
  • 1985 Gibson ES-335 Dot
  • 1983 Gibson Explorer
  • 1984 Gibson Explorer
  • 1982 Gibson Explorer CMT/E2
  • 1984 Gibson Explorer Custom Shop Edition
  • 1984 Gibson Explorer ‘Union Jack’
  • 1976 Gibson Firebird Bicentennial
  • 1966 Gibson Firebird III
  • 1980 Gibson Flying V2
  • 1989 Gibson Les Paul Custom
  • 1977 Gibson Les Paul Deluxe Gold Top
  • 1975 Gibson Les Paul Standard
  • 1964 Gibson Melody Maker
  • 1961 Gibson Melody Maker D
  • 1982 Gibson Moderne Korina Heritage
  • 1981 Gibson RD Artist
  • 1965 Gibson SG Junior
  • 1968 Gibson SG Standard
1981 Gibson RD Artist
Vintage other brand guitars (5):
  • 1966 Epiphone Olympic
  • 1962 Gretsch 6120 Chet Atkins Double Cutaway Hollowbody
  • 1965 Gretsch 6135 Corvette
  • 1974 Rickenbacker 480
  • 1964 Silvertone 1449 ‘Amp in Case’
1974 Rickenbacker 480
Vintage basses (2):
  • 1977 Fender Precision Fretless Bass
  • 1978 Music Man Stingray Bass
1978 Music Man Stingray Bass
Non-vintage guitars (2):
  • 2002 Gibson Les Paul Standard
  • 1998 Gibson Les Paul Standard DC
1998 Gibson Les Paul Standard DC

Many purists may assert that some of these aren’t ‘vintage’. However, that is a debate for another time and place (and has actually been deliberated upon in previous articles). CRAVE Guitars’ cut‑off point is currently the end of 1989, i.e. over 30 years old.

While I might bloviate limitlessly about these musical devices, you will probably be relieved that I won’t be going through each of the guitars in sequence and in forensic detail. Rather, I will try to relate the key headlines, the highs and lows, the learning points and any resultant implications arising from the exercise.

At the time of writing, 38 vintage guitars have been given a well-deserved cossetting and these are the ones I’ll be covering here. The only ones remaining are the two vintage bass guitars, which I dread will both need some expert remedial work, as well as the two newer guitars (1998 and 2002). These remaining instruments will get the treatment they require in due course but now is the time to reflect on the significant work done on the major assets. I abhor calling them that but in this context, I guess that’s what they are.

Where they went and how they returned

In this first section, I may reiterate some points I’ve previously covered, so for regular readers, please forgive me for repeating myself. The elephant in the room is… ‘why?’.

I have to admit that the events that led to ‘here & now’ include a very dark period for me and the impact of the hardship still deeply affects me to my core. I won’t go into the detail of the circumstances, suffice to say that I lost pretty much everything back in 2011 and rapidly had to find a temporary home, not only for us as a family, but also for most of my guitars, which at that time was around 37 of them.

My first job was to document what was going away as best as I could, which included photographs and a comprehensive database covering each guitar. Fortunately for me, a good friend was able to find a safe space for them and they were stored away in a dry and reasonably ventilated roof space. Certainly not the ideal conditions for temperature and humidity but when desperate needs must, it was a saviour of momentous proportions and for which I will be eternally grateful. At least we live in a cool temperate zone, so the swings in climate could be a lot worse.

I had hoped to get back on my feet in a matter of just a few months, however that turned into a year and then several years until they were brought back home in 2019. I felt truly bad about the imposition on my friend and very fearful about what deterioration might be taking place in a less than perfect environment over an extended period of confinement. At least the guitars were all in cases of one sort or other, offering some degree of protection. During the lengthy hiatus, some guitars were retrieved, others swapped out and some were interred. Some of them, however, spent the full 7‑8 years in horrible exile.

We eventually relocated into a new home in the SW of the UK in 2017. When we moved, a few of the newer non‑vintage gear had to be sold off to preserve the core vintage items. A year after our move, my friend also moved home, staying in the SE of England. It was that combination of events that led to ‘the 42’ and I being reunited at long last in January 2019. A specialist haulage company charged the Earth for the pleasure of transporting them 200‑odd miles but at least they arrived OK. I had originally planned to refurbish our damp, dark cellar to make a new home for the guitars first but, as is usually our luck, circumstances got in the way and now I’m living amongst many stacked guitar cases. At least they are always close to hand.

Repatriation Guitar Cases

I knew that it wasn’t just going to be a case of unpacking and playing them as if nothing had happened, so I set about planning a very unhurried and practical approach to assessment and reconditioning. There was no set order to this process; it was very much a case of starting at the beginning and working through in whatever order they happened to be in. Now, in July 2020, I have worked through all the key returnees.

Nevertheless, it has taken over 18 months to complete the programme of refurbishment to this point. Not a quick procedure but not rushed either. I always felt that it would be better to take it easy rather than potentially to make things worse by jumping in too enthusiastically. They are already old, a little longer doesn’t matter.

General Condition

Thankfully, all the guitars were in cases, although the condition of each case varied greatly. Some cases are good and strong, while others have various signs of wear and tear and some are very tatty and weak, providing hardly any physical protection but better than nothing. The oblong cases were far easier to accommodate, being easier and safer to stack, unlike the shaped ones.

The first thing to notice was a predictable coating of general entropy. A lot of people pay a lot of money for genuine old dust and grime (heehee), so the cases stay as they are, as testament to the trials and tribulations to which they had been exposed. I am not one of those snobbish ‘collector’ types that insist on everything being perfect and as‑new. I fully understand that I am only a temporary custodian in their long lifespan that in some cases started before I was born and which most likely will well outlast me. This part of their existence has at least been documented for all to see. It is all part of our collective heritage, albeit a miniscule representation.

Opening each case for the first time and taking each guitar out was the point of maximum trepidation and anxiety, rather than excitement. On initial release, each one was given a cursory once over to see if there was any immediate and obvious appreciable damage. I can report that, so far, that no appreciable impairment has occurred to any of the guitars during stasis. No significant issues requiring immediate corrective work were noticed, which was a massive relief. Phew!

One thing common to many, if not all, guitars was an unidentified surface film/smear, despite being effectively protected from too many outside elements. There were also signs of varying degrees of oxidation and/or corrosion to some metal parts although, again, nothing particularly serious. Most of these ‘issues’ would be rectified by a sensitive clean. A few guitars seemed to have more nitrocellulose weather checking than I remember. Whether this was a result of inaccurate memory or a genuine reaction to environmental factors, I cannot be absolutely sure. While finish crazing can add mojo to a vintage guitar, I’d rather not intentionally make it worse, so I was a bit despondent on that front, as the crazing process is irreversible. So, job number 1 would be a thorough deep cleaning – not enough to ruin the genuine patina of age but just to bring the finish back to life and protect it for the future.

1984 Gibson Explorer

The next thing was a quick acoustic strum and noodle before plugging them in. All of them were strung at full tension to preserve the neck relief but the strings themselves showed various degrees of corrosion and were horribly sticky to the touch. What surprised me was that about 80% of them were still in tune. Impressive. They sounded dead and lifeless though, even acoustically. So, job number 2 would be a full restring and setup for each of them.

Each guitar was then plugged in to an amp to test the instrument’s electrics. This is, sadly, where the most obvious degradation was evident across the board. Initially, some showed no signs of electrical life at all, which was a concern. Others had annoyingly intermittent noisy signals, many had rough scratchy pots, iffy crackly switches and raucous jittery jack sockets. I don’t think that any permanent failures occurred although they clearly needed to be seen to before they could be used in earnest. To be honest, with unkempt electrics and long dead strings, they generally sounded awful compared to how they should be. Not a promising initial analysis. So, job number 3 would be to go over the electrics where necessary to return them to usable operation.

That’s about it. Thankfully, there were no major concerns other than any reservations I might have had anyway (these are vintage guitars after all). The appearance could easily be resolved through some sensitive tender loving care (TLC). The electrics, I was pretty sure could be cleaned up and just used. Restringing and setting them up properly would, I hope give them a new lease of life. Phase 1 sorted then – just 3 key straightforward tasks for each guitar plus anything specifically identified on each one as they went through the TLC procedure.

Playability

As mentioned above, straight out of storage, pretty much every guitar felt dead and lifeless with little resonance from the bodies. Anyone who has followed CRAVE Guitars over the years knows that it is my firm belief that guitars should never be kept as mere trinkets and they need to be played regularly. The guitars seemed to agree wholeheartedly with this observation, as they were telling me loud and clear that they didn’t appreciate not being used for so long. It makes me wonder how many would‑be collectors are put off vintage guitars because they try one out in this unprepared state and then presume that they are all like that.

As I wasn’t in a hurry, I experimented with my approach to this zombie‑like phenomenon. They are just bits of wood, metal and plastic after all; why should a period of abandonment make that much difference? What is it that makes the difference? I decided to take some amateur and idle investigation a little further.

1983 Gibson Corvus

Some guitars I stripped down straight away, while others I decided to play for a while before reconditioning them. The interesting thing is that they didn’t need cleaning or restringing to bring them back to some resemblance of vitality, they simply needed playing for a while. Even with ratty old strings, tarnished finish and creaky electronics, they surprisingly would recover much of their vibrancy after a few days of being used. Some needed more teasing than others – no surprise there. This doesn’t mean that they couldn’t be made even better. Those that were given some TLC first seemed to spring back a bit quicker and stronger with fresh strings on board.

Most of the guitars did not need much in the way of set up to restore their playability. Not one needed a truss rod adjustment (phew!). I suppose the necks have been OK for several decades and they had already settled into how they should be. However, restringing gave an opportunity to check action, nut, bridge saddles, intonation and pickup height to fine tune them. A couple needed appropriate lubrication for the nut, bridge and tuners but not much. Time for some D’Addario/Planet Waves ‘LubriKit Friction Remover’, especially on vibrato‑equipped instruments. Just a few simple things made a lot of difference.

However, getting back to the point, the biggest difference to usability was simply to play them for a while. The comparison between ‘before’ and ‘after’ was remarkable in almost every instance. I’m sure that there must be scientific reasons but I’m not clear in my mind what actual cause and effect is going on here.

General TLC

This is the bit of maintenance that I’m probably best at – the simple stuff. I have mentioned quite a few times that my practical guitar tech skills are limited. What I can do though, is to give guitars a thorough pampering. The first thing is to take the old strings off (and recycle them). Some needed a bit of extra dismantling, for instance to get at the electrics, to shim a bolt‑on neck or to capture neck/body codes and document internal condition.

Cleaning is a relatively straightforward and painless process but it does make a huge difference to aesthetics. If there were specific reasons to do so, I might start off using T‑Cut judiciously to get through thick grime or smooth out some minor scratch marks. However, T‑Cut isn’t recommended to use on vintage guitars but it can help in some circumstances, as long as one is very careful. I have tried other abrasive products with varying degrees of success.

Most of the cleaning process was done using my guitar maintenance ‘system’ of choice, which is D’Addario/Planet Waves products.

More gentle than T‑Cut is D’Addario’s ‘Step 1 Restore: Detailer’, which is good for restoring the underlying nitrocellulose finish without ruining the natural aging and patina that develops over many years. It also helps to reduce minor swirl or plectrum marks, giving a nice healthy overall sheen. The degree of elbow grease required depended on each guitar and it is worth it.

After leaving the finish for a day to stabilise, I then used D’Addario’s ‘Step 2 Protect: Guitar Wax’, which uses premium quality Brazilian carnauba wax to give it a lovely finish and protect it for the future. As a wax, I’m uncertain as to how effective it actually is on nitrocellulose or polyester finishes but I figured that it certainly can’t do any harm. It is important here not to use anything that contains silicon or other unhelpful contaminants.

At this point, I would stop and not use D’Addario’s ‘Step 3 Shine: Spray Cleaner’ unless I continued to play the guitar for some time. It is ideal for use when a guitar needs a quick spruce up after playing, before putting it back into its case and/or moving onto the next one.

Plenty of people prefer other maintenance systems such as Dunlop’s excellent cleaning products. I just prefer the ’Addario/Planet Waves’ products. It may seem like I’m promoting and/or recommending their products, I’m not – it just works for me. They are quite expensive per millilitre but I think worth it on balance.

All rosewood and ebony fingerboards needed a good clean and multiple applications of lemon oil (which, incidentally, ain’t what it used to be!). Here, I use Kyser Lemon Oil, now that I’ve run out of my old good stuff, which it seems you can’t get any more. I’m still looking for something better though. Maple fingerboards only needed the same cleaning as for body/neck finish and it is important not to use lemon oil on lacquered maple fingerboards.

The condition of frets unsurprisingly varied from guitar to guitar, especially in the lower ‘cowboy chord’ frets. A few will require expert fret work at some point but not immediately. There were a few signs of rough surface corrosion. At its worst, rust build up could be removed using very fine grade wet & dry paper, whereas routine sprucing up could be achieved with fine wire wool depending on condition. For a final gleam, I used D’Addario’s ‘Fret Polishing System’. Visually, it does make a difference and it makes playing much nicer, especially when string bending in the higher registers.

Most of the other metalwork was OK and nothing needed anything radical. One has to be careful on gold, chrome or nickel plating, not to abrade the surface too much, so a gentle application of Brasso Metal Polish wadding was usually enough to remove surface tarnish and restore a nice metallic shine. I didn’t need to go further and use something harsher like Solvol Autosol on any guitar metalwork.

The crackly, glitchy, scratchy electrical components, including the usual pots, switches and jack sockets were mostly solved with a dose of electrical contact cleaner and repeated use to clean the surfaces. Here, I use Tone Electro-Sound Guitar Pick-Up & Electronic Cleaner, which is expensive but cheaper than the class leader, DeoxIT. There were a few remaining electrical problems that will require soldering and/or replacement parts/wires but nothing requiring immediate attention. As they were mostly OK when they went into confinement, it was really only new issues that will need sorting out.

1965 Fender Duo-Sonic II

As I’m sure most guitarists will attest, new strings are a key part of the playing experience. Here, I am very pragmatic and don’t insist on a ‘must have’ type of string. I am certainly not a string snob, opting for some (expensive) esoteric boutique product that needs changing after every play. Frankly, I can’t tell the difference. What I will mention is that it requires a level of investment to restring 40+ guitars, especially without ready access to bulk buying as a regular end‑consumer.

For Stratocasters with a vibrato block, I generally use Fender Bullets 10‑46 gauge. For most standard scale guitars, I use Ernie Ball Regular Slinky 10‑46 gauge. For short scale guitars or ones that benefit from a little extra string tension, I’ll go up to Ernie Ball Power Slinky 11-48 gauge. For the Gibson ES‑150, I haven’t decided on a suitable string set yet but it will probably need something like 12-56 semi‑flat wound strings to give it the necessary volume, warmth and resonance that it deserves. With the dreaded Brexit negotiations and no clear trade deals with either the European Union or the U.S.A. (or anyone else for that matter), I may decide to migrate to British‑made Rotosound strings for general use.

A final buffing with a lint‑free duster keeps the guitar’s finish nicely clean and shiny. No guitars are going back into long‑term storage and all will be played regularly over time. They aren’t on constant display and are kept indoors in their cases when not being played.

Remedial Work

Most of the guitars were in pretty good condition when they were stored away, so they didn’t go into incarceration with (m)any outstanding issues. Fortunately, they also came home in pretty good condition too. As mentioned above, I think both basses need some expert attention to their necks. I can’t be sure what issues they may have or what may be required but it is probably best to leave that to the experts.

There are a few guitars that do need electrical work doing, once again, anything beyond cleaning up contacts is best left to the experts. Some have intermittent problems (hums, crackles) or weak signals. On some, the balance of tones doesn’t seem right and could do with investigation. Perhaps some combination of new pots, switches, wires, capacitors, jack sockets, solder joints, etc. may be required.

If replacements and/or repairs are needed, where possible, these will be vintage correct. However, finding genuine vintage parts in the UK is a big issue and importing them is disproportionately expensive, so it isn’t something to be taken on lightly. In several instances, I may have to be pragmatic and replace faulty vintage parts with newer quality equivalents. After all, it is better to have guitars working properly, otherwise they are just planks of wood, bits of metal and plastic that won’t get played. Things like vintage pots can always be fitted retrospectively if need be.

Apart from the basses, not one of the guitars suffered neck problems, which I am genuinely amazed at. I guess they were old and settled anyway. Certainly no fretwork will be needed other than some basic levelling, crowning and polishing. I wish it was something I felt more confident about doing myself but I know that, if I made a mistake, it would undoubtedly be worse than when I started. Best left to a competent technician.

None, thankfully, require any finish work. I would prefer to leave any worn finish, dinks, scuffs, scratches or other marks as they are, rather than refinish a guitar and ruin its authenticity. Besides, I am smitten by the untold stories behind the genuine blemishes and imperfections that give them character. These are not new guitars and neither should they look it. Neither are they museum pieces, so the ravages of daily use are important to both their integrity and charm.

I only have one refinished guitar, which is CRAVE Guitars’ ‘signature’ 1975 Gibson Les Paul Standard. The guitar came to me when it was about two years old and had significant buckle rash on the back. For a while, it was finished in natural before being refinished again in a beautiful cherry sunburst. If you are wondering, it was originally a dark tobacco sunburst. At the time, as a teenager, I didn’t know any better and had absolutely no idea that in several decades that I would a) still have the guitar or b) value original finishes. Oh well. One lives and learns.

1975 Gibson Les Paul Standard

Guitar cases are a different matter. Some of the very old ‘cardboard’ cases are pretty tatty and there is not much that can be done about that. A number of cases have broken latches or missing handles and I would like to work through these to make them at least usable. Sourcing vintage or OEM NOS parts and restoring the hardware isn’t easy, as latches, hinges and handles were mainly riveted on, rather than screwed. Again, this isn’t entirely necessary or urgent, so it can be a project for a future date. Mostly, they are best left as they originally came to me.

Parts and Accessories

There are a few guitars that have had newer parts fitted at some point (not by me, I might add!). Some of these examples could do with sensitive conservation by using vintage original replacement parts. None of this is necessary or urgent so, like several other jobs, it can be done over time as opportunities present themselves. Messing with them or modifying them is not on my agenda.

Case candy is always nice to have but I don’t go out of my way to acquire it, if it wasn’t original to the guitar. Authenticity matters here. We have more than enough fake news and phoney history to contend with, without adding unnecessary doubt to the origins of the guitars.

Some have optional parts missing, for instance, my 1977 Fender Stratocaster doesn’t have its original bridge cover but, let’s face it, does it really matter? It may be another ‘nice to have’ but it serves absolutely no beneficial function.

1977 Fender Stratocaster

Many of the guitars have their original cases but, similarly, many came to me with non‑original or modern cases. While I might like to get vintage original cases for some guitars, that can be inordinately expensive and it kinda messes with originality. Another ‘nice to have’ but not essential. If an occasion comes along to conserve the instrument better, I’ll consider it as and when. It really is the contents that matter.

If I’ve done my buying well in the first place, the acquisition of parts and accessories to restore a guitar to as close to its original condition generally aren’t needed. There are always exceptions to each rule, so it’s on a case‑by‑case basis.

Documentation and Photographs

By now, you’ll have hopefully concluded that they are all in more‑or‑less acceptable playable condition. Everything else is a bonus.

All that is left to do is to document each guitar at this particular point in time. As mentioned above, when the guitars went into storage, they were photographed and their individual characteristics logged onto a comprehensive database. Now, several years later, some of the details on the database can be updated and, where information was missing, new data can be added.

CRAVE Guitars – Database

New photographs have been taken for historical evidence and also added to the database. In the event of some potential future catastrophe such as theft or damage, all the necessary details will be available. Many of the same photographs can also be used on the web site to go with new all‑new features that have been written. I will come back to the web site in due course, so that’s enough on that front for the time being.

In addition, and perhaps more interestingly, this article and the documentation are all part of each these guitars’ long life stories and something that can go with them if and when they ever get passed on. Perhaps for the first time in their long lives, there is a written and photographic moment‑in‑time record for these wonderful heritage artefacts. This extensive task is still only partially completed but there is no ‘burning bridge’ imperative to hurry the task and it can be done at leisure.

The one I couldn’t put down

Rediscovering these lovely vintage guitars all over again was a real pleasure and there weren’t really any major surprises or disappointments. I wasn’t planning on comparing or ranking the returnees. There was, however, one guitar that stood out above all the rest during the process.

It was… drum roll please… the cool 1965 Fender Jazzmaster. It is an all‑original, pre‑CBS standard sunburst Jazzmaster, so there is nothing particularly unusual about it to differentiate it from any other of the period. Once it was resurrected, fairly nearly the end of the programme, it was the one that I just couldn’t put down and I kept playing and playing if for several weeks before I was compelled to move on. The Jazzmaster must have had some fairy dust sprinkled on it for it to stand out from very tough competition.

1965 Fender Jazzmaster

I consider myself to be very fortunate not only to have had all the guitars but also to re‑experience them for a second time. I am therefore largely content with my lot, despite the hellish privations in getting through the wicked times to this redemptive point.

What next?

Well, the obvious next thing to do is to play and enjoy them. That is, after all, the whole point of having these things in the first place, isn’t it? They can’t all be played at once, so organising them so that they can have equal opportunity for playtime will be important.

That brings us back to an oft‑repeated bugbear of mine, which is my priority to refurbish the house’s currently unused cellar to make a safe and secure home for them all. In the meantime, they are arranged not too badly, so they can be accessed without too much heavy lifting.

While I have worked through the vast majority of the repatriated guitars, these only represent about two thirds of all the instruments here at CRAVE Guitars. There are also the other 24 guitars (and counting), some of which could well do with the same sort of pampering that the returnees have had, and some also need similar remedial work to, for instance, frets, electrics, etc.

1967 Gibson Melody Maker SG

I think the cycle of TLC is a continuous one. Once one cycle has been finished, it will be time to start another one. It is a bit like the metaphor of ‘painting the Forth Bridge’, i.e. an on‑going, repetitive and never ending process. Almost the definition of Sisyphean. At least it is a pedestrian task that I can enjoy as therapy from the mad, mad world unravelling outside my little hikikomorian bubble.

While the focus of this article has been on the guitars, there are also effect pedals and amplifiers that need regular attention and some of which were repatriated alongside the guitars. The same basic principles apply to keeping them in tip‑top shape, even though their needs are different.

I don’t need to sell any guitars although a bit of rationalising and trading up may actually be a good idea. The thing is that I’m not one of those people who regularly buys and sells to keep a constant flow of ‘new’ (to me) guitars coming through. I tend to grow an attachment to guitars, and especially these guitars that have been through so much at my expense. There is maybe a small number that I could part with to make space for something else. It’s just whether I can break the emotional ties. Oh, that and the impending global recession will undoubtedly have a bearing on matters.

There will also inevitably be further additions to the ‘collection’ in due course. I can’t see it getting smaller but I can certainly envisage it getting bigger. However, due to the finite constraints of space, time and money, buying anything else is on hold for a while out of plain old and boring necessity.

Help Needed

I mentioned in the last article that vintage guitars, effects and amps need expert attention from time to time to keep them working at their best, so this is basically a reiteration. If there is someone out there with the requisite skillset to help maintain these treasures, and who is local to SE Cornwall in the UK, I would be interested in exploring opportunities. Is there anyone out there attracted to the proposition? If there is, please contact me at the e-mail address at the bottom of every page on the website.

Learning points

Well, having gone through all of the above, I must have learned something, right?

Probably the most important lesson is simply, ‘don’t do what I did’. Don’t store guitars away for long periods, especially in inappropriate environmental conditions. I couldn’t help what happened to me and I did what I had to do using my best judgement at the time. In retrospect, I am not sure what I could have done differently and retain the guitars. I ‘swear to God’ that I don’t ever want to go through that experience again.

The second lesson is ‘to take your time and not rush in’. To do so would risk the integrity of the guitars. After all that time away, a few more weeks waiting to be sorted out made no difference in the big picture. A measured approach worked wonders and also took a lot of the potential stress out of the process. In effect, instead of a single insurmountable task, breaking it down into manageable steps made it more of a therapeutic and cathartic exercise.

The third lesson is to ‘do what you can and do not do any more’. Leave the other stuff to the experts. Be prudent and cautious about what you undertake. Any foolish actions might well prove to be irreversible and therefore regrettable. One also really doesn’t want to make them look like new; they are old and they are meant to look and feel that way. Conserving these artefacts is important, while preserving them (proverbially ‘pickling them in aspic’) is not. Sensitive refurbishment means accepting that what they are is a direct result of what happened to them and to be happy about it. That doesn’t, however, mean that they should now be neglected all over again. They can be played, enjoyed, maintained and kept in good condition, no problem. They’ve survived this long; my job is to ensure that they survive for a long time after me.

That is really it. Three fundamental, profound and straightforward learning points. Simples! The vista of glorious vintage guitars has been re‑opened to me, so that is one thing to celebrate for sure. The haptic experience of playing these gracefully aging instruments has been restored at long last.

Tailpiece

So, that represents some of their story, revealed at long last. After a year‑and‑a‑half, I can finally say that I am relatively pleased with how things are and no longer over‑anxious about what I might find. Why am I not over the moon? Any overwhelming joy or excitement has been surpassed by the detriment of the past decade that I cannot obliviate.

There is still plenty to do, even in one’s splendidly isolated silo of virus‑induced exile. The short‑term aim is largely to continue on the path already set, while also looking forward more ambitiously to the medium‑to‑long‑term future. I have a plan; it is executing the plan that is the problem. That, ultimately, comes down to filthy lucre.

Anyway, that’s two out of the three catch‑up topics now dealt with. I hope you’ll be willing and able to return for another tasty course of ‘whazzup’ delights next month.

Stay safe and hope you continue to survive the coronapocalypse. Remember that the basis of karma is to ‘be good and do good’. Until next time…

CRAVE Guitars’ ‘Quote of the Month’: “Addiction to false beliefs is equivalent to wronging the world’s rights”

© 2020 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

June 2020 – Whazzup at CRAVE Guitars

Prelude

WELCOME BACK ONCE again guitar fans and hello to any new visitors. We are now half way through an extraordinary 2020 and the world is still turned upside down in so many concerning ways. While there may be glimmers of light at the end of the tunnel for COVID‑19, there is still a long way to go and there will be profound ramifications that it will leave in its sizeable wake. At the end of last year, we had no inclination as to what was about to befall, yet here we are now. Perhaps us hooman beans really aren’t as clever as we seem to think we are (shock, horror – hold the front page!). It seems that we also still have some way to go before all people are deemed equal and can live their lives freely, responsibly and peacefully. The first half of 2020 has passed by very quickly and, frankly, good riddance to it. I don’t like wishing life away but it has been 6 months that I’m sure we could all have done without, everything being on‑hold.

Well, here we are and no more historical facts, quotes or predictions on which to ponder this month. I said at the very end of the last article that I would get back to pontificating about ‘cool & rare American vintage electric’ guitars and, at last, I can deliver on that promise/threat (delete as applicable).

There are 3 themes on which I’d like to embark this month. Firstly, I mentioned in my December 2019 article that I had bought some gear (big surprise… not) during last year but I didn’t go any further than to list what they were, without any indication as to the whys and wherefores behind the spending spree. Secondly, after 18 months, most of the 42 repatriated guitars have now been properly assessed and worked through as far as I am able. So far, I haven’t given any real sense about what I found and what I learnt from the exercise. Thirdly, there have been a number of purchases during the first half of 2020 and in due course I can reveal what those are and how they relate both to the existing ‘collection’ and to the ‘wanted’ list from that same December 2019 end‑of‑year/look‑forward roundup.

I think that there is more than enough material to occupy one article, so without further ado, let us begin at the beginning. Sitting comfortably? Good. Then, we’ll begin…

2019 CRAVE Guitars’ Purchases

An Introduction to the 2019 CRAVE Guitars

2019 was certainly an interesting year. Due to circumstances, I started out not anticipating much in the way of guitar purchases. The relatively modest vintage guitar ‘wanted’ list from December 2018 included a Danelectro of some sort, a Fender Starcaster and a Gibson Melody Maker. These had all featured on the target list for more than one year, so it seemed a fairly realistic expectation. What actually happened was a bit more fruitful than I foresaw and I think it deserves some rationale to indicate why they weren’t random purchases. In fact, 2019 resulted in nine new additions to the CRAVE Guitars family, spanning five decades (1940s‑1980s with at least one from each). I couldn’t really afford the outlay but, although it meant sacrifices in other areas, it has probably been worth a bit of hardship. I hope you find this array of short stories moderately interesting.

1982 Fender Bullet H2

This is what happened when esteemed Fender designer John Page was tasked with creating a low cost student model to carry the ‘Made in U.S.A.’ decal and replace the outgoing Mustang and Musicmaster? The result was the Fender Bullet. I’d already acquired a 1981 Fender Bullet which was essentially a Telecaster‑on‑a‑budget model. Several aspects of the first iteration intrigued me and I set about looking for a second generation model, with the more Stratocaster‑like body outline. Initially, I was looking for a ‘standard’ one with twin single coil pickups and the integrated bent steel pick guard and bridge assembly, just like the ‘Tele’ Bullet. Instead, I found a cool Fender Bullet H2 in great all‑original condition in very smart red and white with a maple neck. This version has a more robust standard integrated hardtail bridge/tailpiece with through‑body stringing. The H2 features what at first glance appear to be standard twin ‘humbuckers’. However, looks can be deceiving. The pickups aren’t actually traditional humbuckers – they are actually 4 single coil pickups arranged as two pairs in humbucking configuration. In addition to a normal 3‑way pickup selector switch, the H2 has two additional buttons that ‘split’ the humbucking pickup pairs to give a wide range of tonal options including genuine single coil sounds (unlike most tapped or split humbuckers). When it arrived, one of the 4 pickups wasn’t working and it had to be sent to a pickup expert to fix. Thankfully, it was a weak connection between the coil and pickup lead, so easily sorted. Like the earlier Bullet, the H2 has a very nice standard Telecaster neck. The diverse sounds available from this guitar are nothing short of remarkable and it makes me wonder why this particular unique configuration hasn’t been widely used since. The early USA‑made Bullets were misunderstood and tend to attract a lot of unfair criticism from purists. As a result, like the Fender Leads of the time, they weren’t manufactured for long. Judging it on its own terms, this is really not the cheap Stratocaster imitation it may seem at first glance. I realised that the Fender Bullet H2s are both cool and quite rare, so fit the CRAVE criteria. I never envisaged that it would be so fascinating and collectable while still being affordable. This Bullet H2 came with its original (if battered and stickered) Original Hard Shell Case (OHSC).

1975 Fender Starcaster

The Fender Starcaster (and, no, that isn’t a spelling error) has been a long‑standing ‘wanted’ guitar, ever since I got a 1960s Coronado. There is very little similarity between the two models but as there are very few semi‑acoustic electrics in the brand’s history, I was once again curious. Unusually, I bought this one from a retailer, so I probably paid more than I normally would have considered but it was worth it. Where the Coronado is fully hollow, the Starcaster has a solid centre block running under the pickups and the massive hardtail bridge/tailpiece assembly. Surprisingly, the Starcaster has through‑body stringing like a Telecaster. While the Coronado has DeArmond single coil pickups, the Starcaster uses the sublime Seth Lover ‘wide range’ humbuckers as used on several Telecaster variants from the 1970s. While both the Coronado and the Starcaster use bolt on maple necks, they are, again, very different and the latter is unique to the model with a maple fingerboard. Both the Coronado and Starcaster were reissued by Fender in 2013 although neither are a patch on the originals. The vintage Starcasters are instantly recognisable because of the distinctive bridge assembly and the 5 controls (2 volume, 2 tone plus master volume). When going over the guitar on arrival, I found it was a rare very early 1975 (pre‑production?) model. It has been well used but is still in remarkably good condition with the sort of genuine patina that only age can bestow. The tobacco sunburst and sunburst flame maple is just gorgeous. It is also a fantastic guitar to play with a great neck and I really like the (in‑vogue) offset body shape. Even better, it doesn’t play or sound like any other Fender, ever made. The Starcaster didn’t prove popular on its original release and wasn’t produced for long before being quietly discontinued in 1982. I can understand why it didn’t sell in large numbers but that misses the point about its exclusive charms. Make no mistake, the Starcaster is a high quality instrument just waiting to be rediscovered. This beauty is not to be confused with cheapo far‑eastern Strat imitations from the 2000s that unfortunately carried the ‘Starcaster by Fender’ moniker. The case, while vintage, is not an original Fender Starcaster case. Obtaining a Fender Starcaster was a long‑standing aspiration achieved, which can now be removed from the ‘wanted’ list. These babies are now becoming extortionately expensive on the vintage market, as the ‘collectorati’ are now cottoning onto them. Seems I got this one just about in time‑ish.

1979 Fender Stratocaster Anniversary

I already have a 1977 Stratocaster hardtail and I was kinda looking around for one from the early 1970s with a vibrato before they become unaffordable (rapidly heading that way now). Along the way, I became distracted by the 1979 Anniversary Stratocaster. I missed out on a couple before I finally attained one (once again at a higher price than I intended, unfortunately). The Anniversary is distinctive in that it was Fender’s first foray into limited edition commemorative models, celebrating 25 years since the original Stratocaster’s introduction in 1954. I was attracted by the classic look of silver, black and maple fingerboard. Whether one can regard a massive 10,000 examples as a ‘limited edition’ is debatable. It also comes with a very unsubtle ‘Anniversary’ logo emblazoned on the bass horn plus a much more understated 25th anniversary neck plate which carries its serial/issue number. This one comes with its original certificate of authenticity and most (but not quite all) of its case candy, as well as its ABS OHSC, all of which is nice to have. Like all Anniversary models, this one is heavy at 10lbs (4.6kgs) but I can live with that because of the part this model plays in electric guitar heritage. It looks cool, sounds great and plays very nicely, although the action is a little high. Fundamentally, though, it is essentially a standard Stratocaster with a few aesthetic embellishments. This guitar is in excellent, almost mint condition, which suggests that it was kept as a memento rather than an instrument to be played, which in my view is sacrilege. These aren’t especially rare instruments and many purists would say they aren’t cool. Well, I’m going to stand my ground and say that I like it, which is why it now has a safe home here at CRAVE Guitars.

1983 Fender Stratocaster Elite

This is the first of a pair of Fender Elites that I bought in 2019 (and the second Stratocaster!), both of which I think are quite desirable. As background, the Elite series was only produced in 1982 and 1983 before it was withdrawn shortly before CBS sold Fender in 1984. It is the innovative electronics that really set the Elites apart. The signal chain starts with 3 ‘noiseless’ single coil pickups including an additional dummy coil to reduce hum. These pickups are distinguishable by the Fender logo covers with no visible pole pieces. Instead of a 5‑way pickup selector switch, there are 3 on/off buttons, 1 for each pickup, giving 8 permutations in all (including all ‘off’). This arrangement provides easy access to more sounds than the standard Stratocaster of the time. The switching is unusual but also very intuitive (far better than Fender’s current S‑1 switching). The signal then passes through an on‑board active pre‑amp powered by a 9V battery. The controls are different too and not just the nice soft‑touch logo knobs. There is the usual single master volume complemented by two master tone controls, comprising Fender’s propriety MDX (MiD‑range eXpander) boost and TBX (Treble/Bass eXpander) circuit. The Strat’s iconic jack plate is also absent, with the output moved to the body edge. The bridge assembly is also unique, here it is a top‑loading hardtail Fender Freeflyte bridge. In use, it plays just like a Strat, although it is a touch on the heavy side. The sounds though are, as you might expect, quite different from a normal Stratocaster. Before the purists clamour with cries of sacrilegious iconoclasm, the electronics went on, albeit modified, to be used in both the Eric Clapton and Buddy Guy signature guitars, so the Elite wasn’t an abortive experiment. This example looks particularly cool in creamy Olympic White with a lovely rosewood fingerboard. This Elite is in lovely all‑original excellent condition and comes with its ABS OHSC. Like many 1970s and 1980s Fenders, these are now becoming more desirable on the vintage market. These original Elites are not to be confused with the similarly named but otherwise standard Elite series instruments issued by Fender between 2016 and 2019.

1983 Fender Telecaster Elite

More?! OK then. Onto the second in the pair of Fender Elites. This one is a 1983 Telecaster Elite in lovely translucent Sienna Burst with a gorgeous rosewood fingerboard. Like the Stratocaster Elite, it is a fascinating variant on the classic design. The electronics here comprise dual‑coil noise‑cancelling Alnico 2 pickups routed through an on‑board active 9V preamp with 2 volume controls allied to the same MDX (mid‑range) and TBX (high‑range) tone controls as found on the Stratocaster Elite. Like its sister model, it has the unique top‑loading hardtail Fender Freeflyte bridge. The body has cool single binding on the top edge, similar to the original Custom Telecaster from the 1960s. For some inexplicable reason, the designers at Fender felt that a Telecaster would look good with a Les Paul‑like scratchplate. They were wrong, it doesn’t. Fortunately, the scratchplate was provided in the case, rather than being attached and even then, it could be stuck on with double‑sided tape. Personally, I prefer it without the scratchplate, revealing the woodgrain through the finish. Like the Stratocaster, the Telecaster is a touch on the heavy side but I can forgive that because of its unique position within the Fender canon. This little beauty is in near mint condition and includes its OHSC. The Elite is far from your average Telecaster and, on my unending quest for something cool and rare, it has found a good home here at CRAVE Guitars. Both Elite models (and there was also a Precision bass in the range as well) are harder to come across than standard models, so the prices tend to reflect their relative scarcity. The Elites are unequivocally ‘curio’ guitars from the last dying days of Fender’s notorious CBS era, so they tend to be frowned upon by purists, which makes them all the more appealing to the maverick side of my enduring addiction to the quirky and idiosyncratic guitars from a generally unloved period of guitar history.

1947 Gibson ES-150

Thus, we move onto the ‘Big G’. The author sadly hit one of those dreaded ‘big birthdays’ in 2019 and without much else to celebrate, I figured that I would mark my passing years with something self‑indulgent. I had been keeping my eyes peeled for a vintage Gibson ES‑150 for several years and watching as the prices escalated to, frankly, silly levels. I couldn’t afford one of the carved top pre‑war models with the Charlie Christian pickup, so I was looking around for a newer model, which would be cheaper. For those that may not know, the Gibson ES‑150 was introduced in 1936 and is acknowledged as the first commercially successful electric Spanish guitar. I eventually found a lovely 1947 ES‑150 from the first year of post‑war production and sporting a single P90 pickup. This one was way, way more expensive than I could normally justify so, because of my impending mortality, I was tempted to go for it. In fact, it is the most I’ve ever spent on a single instrument to‑date. This ES‑150 was residing in Italy, so I imported it before Brexit shuts down all opportunities to access vintage fare from our European colleagues. Owning a really old hollow body non‑cutaway jazz guitar is new territory for me, so it was with some trepidation and excitement that I was delving into this particular art form. The guitar itself is in fine all‑original condition with just surface crazing to the lovely sunburst nitrocellulose finish. There is no serial number or Factory Order Number (FON) which, along with the features, dates it to 1947. Playing it is a different experience altogether, as it needs heavy semi‑flat wound strings to get the laminated top vibrating. Then there is the limited upper fret access to contend with, so it takes some time to acclimatise to the technique. Being deep‑bodied and fully hollow, this one actually works quite well as an acoustic jazz guitar too. As you may know, I really like single pickup guitars, so there is less to get in the way of pure P90 tone. The ES‑150 is currently a bit of an outlier within the CRAVE Guitars family. One thing is for sure, it isn’t going anywhere anytime soon. Definitely not the ideal guitar of choice for metal heads though.

1965 Gibson Melody Maker

This 1965 Melody Maker was a bit of a gap filling exercise. Between 1959 and 1971, Gibson released four versions of their ‘student’ guitar, the Melody Maker. The first was a single cutaway Les Paul shape (1959‑1961), the second was a unique and really cute double cutaway model (1961‑1965), the third iteration was a somewhat crude and short‑lived double cutaway model (1965‑1966) and the final generation was SG‑shaped (1967‑1971). This is one of the rather ‘ugly duckling’ models from 1965 (weirdly often called the ‘type 2’, even though it’s the third body shape), which completes the set. The Melody Maker comprises a slab mahogany body with double cutaways, a set mahogany neck with the typical narrow headstock, one single coil pickup, and comes in a reserved cherry nitrocellulose finish. Unsurprisingly, this model has never been reissued by Gibson, although there has been a Joan Jett signature guitar. The Melody Maker name has re‑appeared a number of times since the 1960s. This example is not in pristine shape but is all‑original and it comes with its OHSC. At least this one hasn’t been butchered over the years unlike many. I was shocked that a recent guitar magazine article (which I won’t name but they really should know better) was recommending that the vintage Melody Maker body should be routed and the pickup replaced with a P90 or humbucker! Unbelievable and indefensible! I think that the narrow single coil pickups give the Melody Maker a distinct tone, which is very underrated by purists. Melody Makers are unique in the Gibson history books and unmolested examples deserve much more credit in my view. They are made from the same materials in the same Kalamazoo factory by the same people as other highly prized models and should be regarded (and treated) as worthy vintage instruments in their own right. They are very light and resonant, making them really easy to pick up and play. Compared to many Gibsons from the 1960s, Melody Makers are still relatively affordable on the vintage market and represent a good starting point for people interested in collecting vintage guitars from a major American brand. Personally, I have to admit that I am not a huge fan of this pointy body shape but now that I own one, it is growing on me.

1989 PRS Classic Electric

Having dipped my toes into the world of Paul Reed Smith (PRS) guitars with an elegant 1988 PRS Standard, I was looking around for other early hand‑finished guitars that were made in PRS’s original facility in Annapolis, Maryland. These early, so‑called ‘pre‑factory’ models are becoming increasingly collectable, especially as they are now beginning to get to vintage age (and price!). The early PRS Customs are becoming incredibly expensive, so my eyes settled on an early PRS model that was initially called the Classic Electric when introduced in 1989. The model was swiftly renamed as the CE after a legal dispute with Peavey over the original name. NB. The CE is not to be confused with the far Eastern PRS SE (‘Student Edition’) guitars. I also had my sights set on the early solid Electric Blue metallic finish, which I think is stunningly beautiful. This example is a very early Classic Electric, being only the 473rd guitar off the production line, distinguished by its 24‑fret, bolt‑on maple neck and the plain headstock carrying the block ‘PRS Electric’ logo (soon to change to the familiar modern ‘Paul Reed Smith’ signature script logo). There are quite a few marks including one significant ding to the body and the finish on the back of the neck has worn down. The wear indicates that it has been well played, which is often a sign of a soundly put together instrument. OK, it doesn’t have the flashy flame or quilted maple cap, faux binding, bird inlays or set neck but it is still a very creditable guitar that plays very well and sounds great. The CE is one of those under‑the‑radar PRSs that the collectors tend to overlook, although genuine owners praise them very highly. PRS finally got around to re‑releasing the bolt‑on CE model in 2016 but the new ones really aren’t the same as these early ‘handmade’ examples. Despite the wear and tear, it is all‑original and comes with its OHSC but no case candy. You can’t have everything. A vintage PRS Custom to add to the Standard and Classic Electric sadly has to remain on the wish list for the time being.

1959 Silvertone 1304

I had a bit of a mad spell towards the end of the year when I was buying several guitars for the sake of it. I was looking for a vintage Danelectro and came across this funky little 1959 Silvertone 1304 with its single cutaway and dowdy brown finish. It is very similar to the Danelectro U1 (differentiated by pickup position and headstock logo), which is no surprise seeing that Danelectro manufactured Silvertone guitars for the Sears & Roebuck retail and mail order company at the time. The 1304 is actually a pretty rare model being only available in Sears & Roebuck’s ‘Wish Book’ Christmas catalogue and related advertising of 1958, 1959 and 1960. The neck and familiar ‘coke bottle’ headstock is also rare, being finished in natural, rather than colour matched to the body, apparently due to supply shortages at the time. It also has the circular electrics cover on the back and the squared off neck joint that confirms its age and lineage. The ever present Lipstick pickup and body‑edge tape will be familiar to Danelectro fans. It also feels, plays and sounds just like you’d expect a vintage Danelectro from the 1950s, i.e. great. This was the last of the Danelectro single cutaway body shapes before they moved to double cutaways in the 1960s. The single pickup and simple controls let you focus on playing and getting the most out of a very cool and groovy (and lightweight due to semi acoustic construction) instrument. It is a lot of fun to pick up and play and hard to put down. The action is a little high but that resistance actually forces one to play differently compared to a more ‘refined’ guitar. Like others in this résumé, it is in fine all‑original condition, although it sadly doesn’t come with an original 1950s case. These cool Silvertone and comparable Danelectro guitars are still amazingly affordable for vintage guitars from the so‑called ‘golden era’, perhaps because they were (generally) made in large numbers and sold to a largely undiscriminating ‘student’ audience at the time.

2019 CRAVE Amps? What Amps?

Right, that’s the 2019 guitars covered, so what else was new? Well CRAVE Amplifiers didn’t achieve anything at all in 2019 – no new additions and no losses. Nada. As it turned out, I was quite happy running two relatively similar modest little units as daily go‑to amplification during the year, a 1978 Fender Champ and a 1978 Fender Vibro Champ both in ‘silverface’ livery. Don’t underestimate these diminutive 5W Class A valve amps, they are really great for what they are. I acknowledge that I’m not a vintage amp specialist, so they are not hugely abundant here at CRAVE Guitars. Owning vintage valve amps demands space, time and effort as well as oodles of filthy lucre, so I’m not in a huge rush to buy up large numbers of vintage amps.

An Introduction to the 2019 CRAVE Effects

CRAVE Effects did a little better during 2019, although there were only five new pedals to join the clan. Having said that, two of those were outstanding examples of the type. As with amps, because I am not a vintage effect expert, I’m sticking to a few well‑known global brands from the 1960s to 1980s, rather than go too far into the realms of the unique, idiosyncratic and unusual.

1987 BOSS RV-2 Digital Reverb

It may seem heretical to many but this is the first vintage digital effect to join the CRAVE club. This Japanese BOSS RV‑2 was sought out principally because there are few vintage compact analogue reverb pedals out there. Yes there are the bulky (and expensive) vintage valve reverb tanks from the likes of Fender but I wanted something small and convenient to add an extra special dimension to the aforementioned Fender Champs, neither of which have on‑board reverb. So, a digital reverb was the way to go with this rather plain looking but flexible 1987 BOSS RV‑2. It provides a range of reverbs and it sounds quite natural without too many sibilant digital artefacts, although not quite the soft and cuddly warm tones of traditional analogue reverbs. Still, it does its job very well and it is from the right era (pre‑1990s), which is why it’s here. Interestingly, the high current draw of the digital circuitry in the RV‑2 means that it cannot be powered by batteries and requires a BOSS PSA power supply in order to do its ‘0’ and ‘1’ digi‑thing.

1969 Dallas Arbiter Fuzz Face

This is the first of two iconic classic pedals acquired in 2019. The humble but fabled English Dallas Arbiter Fuzz Face rose to stardom mainly because of none other than Jimi Hendrix. This isn’t one of the earliest Fuzz Faces that used germanium transistors but one of the first to use silicon transistors, this one dating from c.1969. It is amazing what a few cheap electronic components can end up being turned into. Truth be told, I didn’t actually intend to get this pedal. It came along via an eBay auction and I decided to take a punt and put on a (relatively) low bid and… what happened? No‑one came along at the last minute to beat me and I ended up getting it. Yikes! Yes, it was hideously expensive but not as bad as it could have been. Therefore, while it was not exactly a bargain, I suppose it was still a reasonable price for what it is. Fortunately, it delivers its fuzzy glory in all the right ways, so that’s OK then. It is in excellent all‑original condition and in perfect working order, so my initial reticence was soon overcome. It actually looks pretty cool in red too. By today’s standards, its circular form factor does take up a disproportionate amount of pedalboard real estate but, c’mon, it is a vintage fuzz pedal – what’s not to like? The original Fuzz Face was definitely a batteries only zone back in the 1960s and neither is there an LED status light to indicate when it’s on. Great though it undoubtedly is, this is clearly not one of those pedals you’d want to gig with down the local pub, that’s for sure.

1982 Ibanez PT9 Phaser

At totally the other end of the value scale from the Fuzz Face, we have a fairly widely available and averagely collectable 1982 Ibanez PT9 Phaser. CRAVE Effects has somehow accumulated more phasers than any other kind over the years and that’s probably because the late 1970s and early 1980s experienced a surfeit of these simple analogue modulation effects. Let’s be honest, your average phaser really isn’t the most exciting of guitar effects compared to what else is out there, especially in these days of ubiquitous boutique eccentricities. The PT9 is pretty utilitarian and sounds OK, but not necessarily exceptional, which is probably to damn it with faint praise. I’m guessing that Ibanez chose to change their colour scheme from the previous blue/white PT‑909 Phase Tone to the orange/black PT9 in order to compete on looks with the all‑dominating and very orange MXR Phase 90 of the time. I had been on the track of a PT9 to fill a gap in the collection for a while, so the gap was duly filled. Original PT9s are still relatively affordable phasers and they are, perhaps, a good entry point for neophytes to get into vintage effects before getting into more exclusive and expensive fare. Time to move on… Next!

1981 Ibanez TS-808 Tube Screamer Overdrive Pro

… and here is the second iconic classic pedal procured in 2019. The otherwise ordinary green Ibanez TS-808 Tube Screamer Overdrive Pro rose to hallowed status via another guitarist association, this time with the inimitable Stevie Ray Vaughan. Like the Fuzz Face, the original vintage TS‑808s are now inordinately expensive on the vintage effect market, with prices increasing all the time. This was one of those times when I felt a ‘now or never’ moment and bagged a reasonably good one dating from 1981 at just below average price. At this point, I’m going to proclaim ‘emperor’s new clothes’ and say that, while it is undoubtedly a very competent pedal, does it really deserve the unchallenged accolades above all the other competent overdrive pedals out there? Just why we guitarists spend thousands of pounds/dollars on vintage instruments and vintage valve amps and then rely on some dirt cheap solid state components to make them sound ‘better’ is beyond me. To some extent, the same goes for the Fuzz Face but at least that is a down ‘n’ dirty fuzz pedal! I understand all the well‑rehearsed arguments about compensating mid‑boost and clean low gain drive into the front end of an already cooking valve amp. Perhaps I’m missing something else obvious but I really don’t think so. I also know that it goes against the grain to defer from perceived wisdom and to test the TS‑808’s seemingly unassailable reputation. Don’t get me wrong, I’m not knocking the Tube Screamer and what it does. I just believe it is somewhat overrated for the crazy market prices being asked. Anyhow, one of the green meanies is here now and is part of the growing ranks alongside other Ibanez ‘0’ and ‘9’ series pedals. At least I no longer have to keep scanning the market endlessly for a good one at a reasonable price.

1980 MXR Micro Amp

… and right back to the other end of the value scale again with a humble 1980 MXR Micro Amp. Essentially, all a boost pedal does is to increase the signal level hitting the front end of a (valve) pre‑amp, therefore not only adding a bit of volume, but also hopefully some natural compression and a bit of smooth distortion without affecting the underlying tone. Once again, there is something of a question mark about relying on a few cheap bits of electronics to make vintage gear ‘sing’. Having said that, the Micro Amp does its job perfectly well and it can be a really useful tool in the right circumstances. However, let us be clear that it is not exactly the most exhilarating or far out stomp box out there. As an idle observation, it is funny how things come round again given long enough. Outboard pre‑amp pedals are now a ‘big thing’ in the 2020s, albeit a bit more complex than this little MXR. There are many modern‑day compact pedal pre‑amps out there, including the Hudson Electronics Broadcast, Catalinbread Epoch Pre and Fredric Effects 150 Preamp. At least the unassuming little white MXR Micro Amp doesn’t take up much pedalboard space and is oh‑so simple in operation with only a single ‘Gain’ control. Like most un‑modified MXR pedals back in 1980, the Micro Amp only eats batteries for breakfast and doesn’t come with either an LED status light or DC input.

Help Needed

Vintage guitars, effects and amps need attention from time to time to keep them working at their best. While I can undertake basic maintenance, set ups and general TLC, I know that my skills are finite. I am looking for a guitar tech or luthier who can, from time to time, take on a vintage guitar and do some sympathetic remedial work, whether it involves fretwork, electrics, repairs or whatever. I’m also looking for someone who can do occasional work on effects and amps, which is basically electronics, switches, leads, soldering, etc. With over 60 vintage guitars, more than 50 vintage effects and 6 vintage amps, I need some expert help every so often. If there is someone out there with the requisite skillset for any or all of the above, and who is local to SE Cornwall in the UK, I would be interested in making a connection. Anyone interested? Please contact me at the e-mail address at the bottom of every page on the website.

Tailpiece

Actually, I think this is a good place to pause, so I’ll stop there for now. Nine guitars and five effect pedals is enough for one month.

At this point, I must stress that I did not buy any of these items as a pecuniary investment – anyone familiar with CRAVE Guitars will know that is not my motivation. However, given that savings accounts in the UK are currently offering just 0.01% interest rate, I would prefer to be broke and have great vintage guitars, amps and effects to play with and look at. The last recession that began in 2008 apparently saw 30% wiped off the value of vintage guitars, albeit temporarily. To me, it’s still a no brainer, when funds become available, eBay here I come for some vintage gear hunting. The other thing I would add is that all of the new additions are consistent with CRAVE Guitars larger strategic grand plan to conserve ‘Cool & Rare American Vintage Electric’ guitars, amps and effects as important musical and cultural heritage. Oh, and it’s also an unhealthy obsessive addiction as well but I guess you’ve sussed that out already.

At the top of this article I mentioned that there are three themes to work through and I’ve only covered one of them. I am conscious that the ‘History of Modern Music…’ series resulted in lengthy articles and this is, compared to them, quite short. I’m also a bit fatigued by the demands of lengthy researching and writing exercises. Thus, I’ll leave the rest for future article(s). I reckon that it is best to keep these reflective articles relatively consumable. Besides, there really is no rush, is there? Are we going anywhere, anytime soon? No, I thought not.

Believe me, there is still plenty of stuff to be getting on with here at CRAVE Guitars, so I guess I’ll be getting on with stuff then. Who knows what the world will be like in the coming months. Despite the continuing stresses and challenges of COVID‑19 et al, I hope that you’ll return here in due course for your prescribed diet of diversionary diatribes. Stay home, stay safe and stay (in)sane. Remember this simple but important mantra while civilisation unravels around us, Peace, Love & Guitar Music. Until next time…

CRAVE Guitars’ ‘Quote of the Month’: “I can see where this is going because I’ve been where it went.”

© 2020 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

December 2019 – Out With the Old, In With the Old

posted in: News, Observations, Opinion | 0

Welcome to the very end of December 2019 one and all. Due to the time of year, there is a short break in the ‘Story of Modern Music…’. After 9 straight months of factoid overload, I have taken the executive decision to take a rest and reflect on the here and now. There are other advantages of a temporary hiatus in that this article is MUCH shorter than the recent monthly detailed dissection of music history. Abnormal service will be resumed as soon as impossible.

So, that was 2019, the year that was. Not only do we end the year with this article, we also see the culmination of the ‘teenies’. Before anyone corrects me, yes, I know that technically the decades don’t change here but pretty much everyone accepts it that way, so just for once – shock, horror – I’m going with the flow. I don’t know about you but the last decade, and indeed the last 12 months, seems to have passed in a blur.

I am sure you’re fed up with the traditional lazy television programming that seems to dwell on retrospectives and lists as is usual for this time of year. You may be displeased that I’m about to do the same, although I doubt that this tangential view of existence will ever get broadcast nationally.

Personally, it’s been a really, really bad year again, with far too much pain, misery and torment, and little sign of light at the end of a (collapsed and blocked) tunnel. I genuinely cannot remember what joy or pleasure feels like. For self‑preservation, I must look to the future with some hope and positivity for a bit of much‑needed karma, justice, salvation and redemption. There, I’ve got it off my chest and I won’t bang on about it again (or maybe just a little!).

Departures in 2019

As ever, we have to say au revoir to some great guitarists who have climbed aboard that spiritual transit van to the infinite jam session with the angels (and possibly the occasional demon). In contrast to recent years, this year’s list is thankfully short, although I expect those who are on it would prefer not to be. They and their music will be missed…

  • Dick Dale, 16 March, aged 81
  • Bernie Tormé (Gillan, Ozzy Osbourne), 17 March, aged 66
  • Boon Gould (Level 42), 30 April, aged 64
  • Leon Redbone, 30 May, aged 69
  • Roky Erickson (13th Floor Elevators), 31 May, aged 71

Non-guitarist departures included:

  • Ross Lowell (the inventor of gaffer tape), 10 January, aged 92
  • Jim Dunlop Sr. (Dunlop Manufacturing), 6 February, aged 82
  • Keith Flint (The Prodigy), 4 March, aged 49
  • Scott Walker (The Walker Brothers), 22 March, aged 76
  • Dr John, 6 June, aged 77 (NB. he did play guitar regularly)
  • Ginger Baker (Cream, Blind Faith, Baker Gurvitz Army), 6 October, aged 80

Old in at CRAVE Guitars – vintage gear acquisitions in 2019

It seems to have been a better year for guitar‑related accumulation than I’d anticipated a mere 12 months ago. This is partly because of delayed house works (ggrrr!).

The trend of the last couple of years seems to be continuing, with a greater focus on the 1970s and 1980s. This is predominantly because 1960s artefacts are rapidly becoming well beyond my modest price range. Rather than pay nonsensical ‘silly money’ for older guitars just because they are old and expensive, I’m looking at what is currently a bit more reasonably priced from later decades, while also being selective about notable and interesting instruments. As you might expect, the purchases had to fit the CRAVE Guitars’ criteria (cool, rare, American, vintage electric) – the only exceptions being effect pedals from Japan and Europe. At least for the time being, some of this year’s purchases are just about ‘affordable’, while others were almost regrettably extravagantly decadent given my borderline financial disposition. Anyhoo, without further ado, time for some introductions…

CRAVE Guitars (9)

Before listing new ‘old’ arrivals, let’s just backtrack for a moment…

Example #1 – In 2016, I looked ahead and mentioned a couple of guitars on the ‘most wanted’ list. One was a 1970s Fender Starcaster and the other was a 1950s Gibson ES‑150. Perhaps not surprisingly, I failed dismally in 2017… and again in 2018.

Example #2 – In 2017 and again in 2018, I speculated about the possibility of getting a 1965 Gibson Melody Maker and… yup, failed again.

Example #3 – In 2018, I thought about finding a 1970s Fender Stratocaster and… guess what? Fail.

Remarkably, that has now changed and I managed to lay my grubby mitts on all four of the above during the last 12 months. I also went overboard just a little bit with some other spontaneous impulse buys.

So, 2019 actually saw 9 vintage guitars, covering 42 years from the 1940s to the 1980s, with at least one from each decade joining the CRAVE Guitars family. Herewith, the profligate plethora of pulchritude (apologies for the pompous alliteration)…

  • 1982 Fender Bullet H2
  • 1976 Fender Starcaster
  • 1979 Fender Stratocaster Anniversary
  • 1983 Fender Stratocaster Elite
  • 1983 Fender Telecaster Elite
  • 1947 Gibson ES-150
  • 1965 Gibson Melody Maker
  • 1989 PRS Classic Electric
  • 1959 Silvertone 1304
CRAVE New Guitar Arrivals 2019

CRAVE Amps (0)

Despite intensive but unsuccessful searches, there were no amplifiers that joined the family during 2019. Like with guitars, in both 2017 and 2018, I set out to find a 1970s ‘silverface’ Fender Princeton. To‑date, that lustful ambition remains unrequited… for now, the search goes on.

CRAVE Effects (5)

As it turned out, 2019 was a funny year for effect purchases. It was a case of quality over quantity and I did manage to lay my hands on two highly sought after iconic (and therefore exorbitantly expensive) pedals. These weren’t just gap‑filling, they have been on the ‘to do’ list for some time but considered them to be way out of my price range. Consequently, fewer budget purchases made them just about possible. They were…

  • 1987 BOSS RV-2 Digital Reverb
  • 1969 Dallas Arbiter Fuzz Face
  • 1982 Ibanez PT9 Phaser
  • 1981 Ibanez TS-808 Tube Screamer Overdrive Pro
  • 1980 MXR Micro Amp
CRAVE New Effect Arrivals 2019

Once the full ‘Story of Modern Music…’ has been published, I may well return to 2019’s purchases and explain the rationale behind what is a relatively diverse range of acquisitions.

Repatriation update

In addition to the newcomers, it was way back in January 2019 that I was pleased to welcome home 42 guitars, 40 of them vintage, from an extended period of enforced storage (long story!). I set out on an ambitious mission to re‑home them with respect and to lavish upon them some much‑needed overdue TLC. The aim is that they can once again be used for their intended purpose, which is to be played regularly. I wasn’t going to rush the exercise, so it has been a bit of a long haul. I wanted to ensure that each one was given the sensitive treatment it deserved. For some, it was just a clean‑up and a tweak here and there to set them up before they were re‑strung – job done. For others, some more intensive care was necessary and I have worked on them as far as I can take them, due to my lack of ability in the practical side of things. There are a few, however, that need more expert skills than I have to sort them out properly. Thankfully, I know my limits and don’t pretend to be a proficient technician.

So far, 32 of the 42 returnees have been tended to, which means that there are still 10 repatriated guitars still to work on. Six of these are vintage guitars and are next on the to‑do list. Another two are vintage bass guitars which I suspect both need some neck work, so they will be near the back of the queue. The privilege (?) of going last will go to the only two non‑vintage guitars which I own. In theory, being the newest, they won’t need as much remedial work done on them. Fortunately, none so far have been ruined. Some have degraded a bit more than I would have liked but there is nothing serious to be concerned about. Phew!

Once the ‘conservation’ work has been completed and they are once again in good playing condition, they have been/will be photographed and documented. Feature articles have also been drafted on each one. The intention is to update the web site to exhibit them at their best. Then, it will be just a case of playing and enjoying them.

Building works

I cannot let the dastardly year dissolve into history without making a comment about the long overdue building works to convert the house’s dark, dank cellar into a safe, secure accommodation for the guitar members of the family. Due to egregious actions of spiteful and vindictive neighbours, it had to be deferred yet again. Basically, this means that no progress whatsoever was made during 2019.

Music albums released in 2019 (40-ish)

Surprisingly, after a (very) slow start it actually seems to have been a pretty good year for new music. I was quite sceptical up to about two thirds of the way through the year, despairing that the musical landscape was becoming ever more moribund. Then, out of nowhere, there seemed to be a veritable flood of interesting music to close the year out. I bought a shed load of old and new music in 2019 and the following are the diverse highlights of this year’s releases for me. One can hope that there may be some future ‘classics’ among them.

  • !!! – Wallop
  • Amon Amarth – Beserker
  • Beck – Hyperspace
  • Jade Bird – Jade Bird
  • The Black Keys – ‘Let’s Rock’
  • Blood Red Shoes – Get Tragic
  • Cage The Elephant – Social Cues
  • J.J. Cale – Stay Around
  • Nick Cave & The Bad Seeds – Ghosteen
  • The Chemical Brothers – No Geography
  • The Comet Is Coming – Trust In The Lifeforce Of The Deep Mystery
  • Cigarettes After Sex – Cry
  • The Cinematic Orchestra – To Believe
  • Crumb – Jinx
  • The Cure – CURÆTION-25: From There To Here | From Here To There / Anniversary: 1978-2018 Live in Hyde Park
  • Dream Theater – Distance Over Time
  • Billie Eilish – When We All Fall Asleep, Where Do We Go?
  • Foals – Everything Not Saved Will Be Lost Part 1
  • Foals – Everything Not Saved Will Be Lost Part 2
  • Rory Gallagher – Blues
  • Hawkwind – All Aboard The Skylark/Acoustic Daze
  • Hot Chip – A Bath Full Of Ecstasy
  • Khruangbin – Hasta El Cielo
  • Trini Lopez – The Very Best Of Trini Lopez (compilation)
  • Membranes – What Nature Gives… Nature Takes Away
  • The Murder Capital – When I Have Fears
  • New Model Army – From Here
  • Rammstein – Rammstein
  • Lana Del Rey – Norman Fucking Rockwell!
  • Joanne Shaw Taylor – Reckless Heart
  • Sleaford Mods – Eton Alive
  • Sleater‑Kinney – The Center Won’t Hold
  • Slipknot – We Are Not Your Kind
  • Bruce Springsteen – Western Stars
  • Toro y Moi – Outer Peace
  • Robin Trower – Coming Closer To The Day
  • The Twilight Sad – It Won/t Be Like This All The Time
  • Underworld – Drift Series 1: Sampler Edition
  • Thom Yorke – ANIMA
  • Neil Young – Colorado

Plus (album-like) EP:

  • Black Stone Cherry – Black To Blues 2

Major concerts in 2019 (1):

Due to personal circumstances, there was just one major live music event in 2019:

  • Hyde Park – Bob Dylan, Neil Young, Laura Marling, Cat Power, Sam Fender

Unfortunately, even Cornwall’s local Looe Live music festival wasn’t attended, despite it being right on the doorstep.

Social Media Quotes from 2019:

Over the year, I’ve been posting thousands of snippets on Twitter and Facebook. The following are actual comments from some very nice people about CRAVE Guitars that came this way during 2019. I don’t usually get much in the way of acclaim, and neither do I seek external validation for what I do, so these kind words of feedback felt extra special to me. They are truly appreciated and, frankly, I am humbled and overwhelmed by them.

“I love the variety of artistry you tweet about. Keep it up!”

“Thanks for the history lessons every day from @CRAVE_Guitars”

“Hey you bring it every day, man! You’ve turned me on to things I’d likely not see otherwise! Keep on rocking it!”

“Great people, knowledge, posts and positive vibes to all! 5 star”

“Thank you for expanding my guitar horizons!”

“Once again, I have been enlightened by CRAVE Guitars. They don’t teach this history in college.”

“I finally went to your website and understand you so much better now… Nice collection!!! Very eclectic and impressive! Great website, Crave!”

“You post such cool guitars. Ones that I’ve never seen before. Some truly unique ones too. Keep up the great work friend, you run a great account”

“Thank you! Hats off to crave guitars!”

“Love your photos! Thank you so much!!”

“Thank you for all your fabulous postings”

“…like always Awesome posts and great follow ups I really appreciate it, Respectfully from the USA!!!”

“Crave Guitars is one classy company”

“Thx Crave this is most excellent.”

“… thank you for sharing the great guitars and posts of Rock N Roll truly enjoy checking out your page daily.”

“Love guitars. Love music. Love Crave. <3”

“… I have to give you a separate kudos for the photography. What a picture…”

“I really enjoy these trivia posts as much as the guitar pictures. Thank you”

“That’s wonderful and thank you. Awesome page”

“You should have “A Potted History of the Guitar” as a pinned tweet. I know that you’re modest, but that thing is epic.”

“You have a great Twitter page my friend and always something to learn about with your topics.”

“Congratulations with Continued Success Great Crave Guitars!!!”

“Great stuff on your Twitter page! Love it! Keep it coming!”

“Great Twitter page! Love it. Keep it up. Always great informative and interesting.”

“You have a great Twitter Page. Love it. Great stuff. Keep it up.”

“I really like your collection. it’s very impressive and interesting.

Have a great day, Crave.”

“I totally dig your archives guitars & their players! So great! 100% fan”

Also, during November 2019, Twitter followers exceeded 6,000 for the first time. A huge “thank you” is extended to everyone who has shown interest and support.

CRAVE 6,000 Twitter Followers

So… looking forward… here is what might be coming up in 2020:

There, that’s the obligatory retrospective done, so it is now time to look forward to the coming year and the start of a brand new decade.

Vintage gear for 2020

I have been very cautious over the past few years about ‘most wanted’ gear, believing that circumstances would be very different. So, this year, I’m going to be a touch more ambitious in stating what I’m searching for in 2020, although I guarantee that not everything on the list will be procured. If the building works go ahead, the list will have to be shortened. It won’t be easy but I am back on the quest for some ‘forgotten’ models, which are more difficult to source, especially in good condition in the UK. However, apart from one wild expensive aspiration, the rest should (?!?!) be a bit more ‘affordable’ than some of this year’s purchases. I am not greedy and I don’t expect to achieve the full list, so it is purely indicative and should be considered more of a direction of travel.

Guitars

  • 1960s Danelectro (no specific model)
  • 1970s Fender Bass VI
  • Any one (or more) of the ‘forgotten’ Gibsons from the 1970s or 1980s, e.g.:
    • Gibson Challenger
    • Gibson Firebrand
    • Gibson Marauder
    • Gibson S-1
    • Gibson US-1
    • Gibson Victory MVX
    • Gibson Les Paul DC XPL 400
  • 1970s Guild (S-100 and/or S-300)
  • 1970s Peavey T-60

Amps

  • 1970s ‘silverface’ Fender Princeton Reverb
  • 1970s ‘silverface’ Fender Deluxe Reverb

Effects

  • 1980s BOSS DD-2 Digital Delay
  • 1970s Colorsound/Sola Sound Tonebender (fuzz)
  • 1970s Electro‑Harmonix Bad Stone (phaser)
  • 1970s Electro‑Harmonix Small Clone (chorus)
  • 1970s MXR Micro Chorus

Help needed (x3)

I know my limitations on several fronts. It therefore makes sense to seek outside assistance with a number of up‑and‑coming key tasks. These are NOT New Year resolutions but they are effectively my self‑imposed targets for 2020. All three, however, rely on other people’s expertise.

Task #1 – I would dearly like to make progress with the long‑deferred cellar works. The first step is to understand what may be involved. If that looks promising, I may well finally proceed. I need someone who knows how to ‘tank’ a 90‑year old cellar effectively and to ensure it stays dry, warm and well‑ventilated enough for safe and secure guitar storage.

Task #2 – Routine completion of the repatriation programme should be reasonably straightforward and achievable. In terms of more involved remedial work on a number of instruments, I am looking for a competent luthier/guitar tech, experienced in working on vintage electric guitars, based local to me in south east Cornwall UK, and who would like to work with me on this extra degree of ‘restoration’.

Task #3 – In addition, I would really like to improve my guitar playing. I’m not starting from scratch but I have limited competence and confidence. I am sure I also have a number of bad habits. This means taking up guitar lessons on a one‑to‑one basis, principally for the interaction, as I’ve never got on well with self‑learning books or videos. I have never been formally trained and feel that I could do much better. I would benefit from an additional level of inspiration, technique and knowledge that a tutor could bring.

If there is anyone out there who could either help or knows someone who could help with one, two or all three of the above, please contact me. I shall report back on degree of achievement, if any, during and at the end of 2020.

Major gigs

There will be very few opportunities to see live music in 2020. However, one major concert has been lined up, which I’m really looking forward to:

  • Rammstein (Cardiff in June 2020)

Hopefully, I might get to participate in the local Looe Live festival in September.

Web Site

Another thing that I really, really must get to grips with is a long overdue major overhaul of the CRAVE Guitars’ web site. The material is there, so it will be a case of expunging the procrastination and get on with it.

Proceed to check out

I really don’t think that there is much more that I can add at this juncture, so it is time to wrap things up for 2019 and the ‘teenies’. Roll on the New Year and hope that the (roaring or whimpering) twenties are an improvement on the last 2 challenging decades.

On a broader front, one has to remain optimistic that humankind will come to its senses and live in sustainable peace, equitable prosperity and cordial harmony. One can dream.

On a practical level, ceteris paribus, I will hopefully get back to the ‘Story of Modern Music…’ next month. In the meantime, it’s back to refurbishing and playing some vintage guitars. Result!

Happy New Year/Decade everyone. Until next time…

CRAVE Guitars ‘Quote of the Month’: “The idea of peace, love and music may not have the power to change the world in the way we might hope but just think about what the world would be like without it.”

© 2019 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

December 2018 – What A [Deleted] Year That Was

posted in: Opinion | 0

Welcome to the 50th monthly article and the inevitable end-of-year roundup and a look back at the last 12 months. As usual with retrospective roundups, it’s a time for lists and reflective hindsight. As one year ends, another is about to kick off, so it is also an opportunity for a tentative look forward. I hope all readers had a great 2018 and have the opportunity to look forward to a positive 2019.

Overall, 2018 was a very difficult and challenging year for CRAVE Guitars. I’m not about to go into personal circumstances; suffice to say that it was immensely testing and an experience I never want to repeat. That said and out of the way, let’s get onto the end‑of‑year summary.

2018 departures:

As is forlornly inevitable, all things come to pass and this year, like every other before it, has seen the demise of some truly inspirational musicians. At this time of year it is customary to take a few moments to contemplate those guitarists that we have lost in 2018 and recall what musical treasures they have left us. Their talents will be sorely missed and it is sad to think that there will be no more distinctive music from these guys (no gals this year). Rest in Peace and forever rock the big stage in the sky. Sad losses over the last 12 months include:

  • ‘Fast’ Eddie Clarke (Motörhead), on 10th January, aged 67
  • Danny Kirwan (Fleetwood Mac) on 8th June, aged 68
  • Alan Longmuir (Bay City Rollers) on 2nd July, aged 70
  • Ed King (Lynyrd Skynyrd) on 22nd August, aged 68
  • Otis Rush on 29th September, aged 83
  • Pete Shelley (Buzzcocks) on 6 December, aged 63

Plus, there were many notable non-guitarists who are no longer with us, including:

  • Dolores O’Riordan (The Cranberries) on 15th January, aged 46
  • Mark E. Smith (The Fall) 0n 24th January, aged 60
  • Aretha Franklin on 16th August, aged 76

While nothing to do with music, I also wanted to mention that the great granddaddy of comic books, Mr. Marvel himself, Stan Lee passed away on 12th November at the age of 95. We also lost one of the world’s foremost scientists when Stephen Hawking died on 14th March, aged 76.

2018 arrivals at CRAVE Guitars

This may come as a bit of a surprise but, in the background, there were actually a number of music gear purchases during 2018. Normally, I would have covered these under ‘New In at CRAVE Guitars’ articles during the year as they happened. However, with the ‘Potted History of the Guitar’ series dominating the output, coverage of their arrival got side‑lined. Depending on how things pan out in early 2019, I may give the new arrivals a bit more of a deserved coverage. In the meantime, here is a flavourless list of what came in over the last 12 months.

Gear purchases:

Guitars (4)…

  • 1971 Fender Bronco
  • 1978 Fender Musicmaster
  • 1989 Gibson Les Paul Standard
  • 1988 PRS Standard
Guitars 2018

Amps (1)…

  • 1978 Fender Champ
1978 Fender Champ

Effects (12)…

  • 1980 BOSS CE-2 Chorus
  • 1986 BOSS PSM-5 Power Supply & Master Switch
  • 1970s Colorsound Swell (volume pedal)
  • 1998 Electro Harmonix Small Stone Phase Shifter (Russian)
  • 1999 Electro-Harmonix Big Muff p (Russian)
  • 1980 Electro-Harmonix Zipper Envelope Follower
  • 1981 Ibanez AF-201 Auto Filter
  • 1981 Ibanez GE-601 Graphic Equalizer
  • 1983 Ibanez SD9 Sonic Distortion
  • 1976 MXR Phase 45
  • 1980 MXR Six Band Graphic Equalizer
  • 1960s VOX Volume/Expression
Effects 2018

Plus… 3 pedals were also replaced during the year:

  • 1979 BOSS PH-1 Phaser
  • 1982 Ibanez AD9 Analog Delay
  • 1975 MXR Blue Box
Effect Replacements 2018

The last two years of planned and unplanned purchases seems to indicate that CRAVE Guitars is increasingly specialising in 1960s to 1980s gear. The 1960s are getting increasingly expensive for me, hence the lack of recent purchases from that particular decade. The 1970s and 1980s are often seen as an unpopular period for vintage guitars, so… for me, that’s a very good reason to focus on this period and prove the naysayers wrong. There are plenty of VERY good guitars to be had from both the 1970s and 1980s. The spotlight still accords very closely with the principle of ‘Cool & Rare American Vintage Electric’ Guitars, so I’m happy with that as a modest ambition. I’m still not running it as a business, so it is still very much a not‑for‑profit enterprise about conserving the heritage for the future.

I haven’t sold any guitar equipment this year, as is perfectly normal with a deep‑seated guitar‑affliction. However, the plan is that if planned plans go to plan, I will be selling some equipment to reinvest in the heritage, either by trading up to older/better guitars/amps/effects or perhaps just getting something new and unanticipated. Watch this space…

2018 Live concerts (2):

2018 was a sparse year for live music, so the list is short…

  • BST Hyde Park (The Cure, Interpol, GoldFrapp, Editors, Slowdive, The Twilight Sad, Pale Waves)
  • Looe Saves The Day music festival (various)

That’s it. Still, better than nothing at all.

2018 Album releases purchased (20):

2018 has proved relatively moribund at times and searching out great new music seemed harder than it should have been. There was, though, a diverse range of music from all sorts of genres. I’m always looking for cool new music to sit alongside the greats (and not so greats). Quality is variable, which is to be expected in this day and age, but there is much fun to be had discovering music both old and new, good and bad – after all, how do we recognise the greats if we don’t have the rest to compare them to? Here are the new albums from the last 12 months gracing CRAVE Guitars’ iTunes:

  • Courtney Barnett – Tell Me How You Really Feel
  • Black Label Society – Grimmest Hits
  • Buddy Guy – The Blues Is Alive And Well
  • Confidence Man – Confident Music For Confident People
  • Gaz Coombes – The World’s Strongest Man
  • The Cure – Mixed Up (Deluxe Edition – original standard release in 1990)
  • Editors – Violence
  • Tommy Emmanuel – Accomplice One
  • Ghost – Prequelle
  • Goat Girl – Goat Girl
  • Jon Hopkins – Singularity
  • Lance Lopez – Tell The Truth
  • Low – Double Negative
  • Nightmares On Wax – Shape The Future
  • Dan Patlansky – Perfection Kills
  • The Prodigy – No Tourists
  • Ry Cooder – The Prodigal Son
  • Shame – Songs Of Praise
  • Various Artists – This Is Trojan Dub (reggae)
  • Wilko Johnson – Blow Your Mind

Plus… Black Stone Cherry – Black To Blues (E.P.)

These weren’t the only purchases. They are only the 2018 album releases – I also bought quite a few albums from previous years, not included above.

Social Media

Over the last 4 years, CRAVE Guitars has posted almost 29,000 posts on social media. On 12th September 2018, CRAVE Guitars reached (and exceeded) 4,000 followers on Twitter (4,515 at the time of writing), which has taken an immense amount of hard work doing the research and building up reputation and credibility.

A big shout out to everyone who has shown an interest in the lighter entertainment side of CRAVE Guitars’ social media output. THANK YOU all! In addition to Twitter, CRAVE Guitars also has guitar‑related content on Google+, Facebook, LinkedIn, Instagram, YouTube, Pinterest, Flickr and Tumblr. Check it out.

Here are some genuine comments from Twitter followers that made me think that all the effort has been worthwhile…

“I love Crave Guitars !!!”

“… there are many who greatly appreciate your expertise and your encyclopaedic knowledge around your calling. Thank you for sharing your passion.”

“… thanks for the inspiration CRAVE Guitars.”

“Thank you for sharing your knowledge & all the beautiful guitars”

“… you post great stuff. Thanks, makes my day”

Plus… there are the usual dicks that populate the various platforms. They go with the territory I guess.

Over the year, CRAVE Guitars has showcased guitars by over 200 different guitar manufacturers working hard every day and from around the globe. The brands covered range from the famous global brands right down to individual luthiers who you may not have heard of because they make very small numbers of guitars in home workshops. I will continue to highlight the diverse range of craftsmen and women, all of whom deserve exposure in today’s highly competitive and challenging economic climate.

‘A Potted History of the Guitar’ Articles

The ‘Potted History’ series of articles took over the blog in 2018, using up 9 of the 12 months, leaving little room for other ramblings. Still, it was different from previous years and probably unlike future ones too. Variety is good.

During the year, I got some really nice unprompted testimonials on the series, so a big “Thank You” to everyone who read the blog articles and made all the research and writing meaningful. In addition, I learned a lot from doing it too. Here are some genuine comments received – thanks for your feedback…

“Thanks a million for the personal gift of your writing and pics of gorgeous guitars… You’re cool. Thanks!”

“Brilliant article, I have learnt so much.”

“Really epic article.”

“Finally read the whole series yesterday. You should turn this into a book… It was certainly worthwhile, one of those reads when you’re sorry when it ends. Hat off to you Sir for the effort.”

The ‘Potted History’ was originally intended as an entertainment piece for those that might have an interest in the general subject matter, while also having enough detail for the keen enthusiast but not so dry that it would only appeal to the clinical expert (whimsically described as ‘someone who knows more and more about less and less’). It wasn’t a forensic academic thesis, so it may not have had the requisite degree of nerd‑fodder for some. I didn’t allow comments on the articles, as I simply couldn’t cope with the interaction needed to respond to them properly.

In order to make the series more accessible and coherent, I may try to turn them into a feature on the web site. I don’t have the resources to publish them as a ‘book’, so that seems the best format, at least for the time being.

CRAVE Guitars Web Site

The CRAVE Guitars’ web site has, unfortunately been neglected this year and has hardly been updated at all, a failing that really needs to be rectified. About 15%-20% of the content needs something entirely new and about another 60% of it warrants considerably updated material. In most instances, most of the basic feature narrative has already been written and just requires finessing and the time to do it. New photos are needed for around 50% of the guitars but that requires them firstly to be relocated to ‘here’ and secondly, many of them will require essential refurbishment after a prolonged period of storage. That’s before I even begin to think about creating exciting new and creatively different ways of doing things. It’s all on the ‘to do’ list for 2019.

CRAVE Guitars Website

[Deleted] Whinge

Now that the web site is generating a lot more traffic and social media is picking up, I am getting overwhelmed by [deleted] idiots deluging my CRAVE Guitars’ e‑mail inbox with [deleted] spam and other [deleted] rubbish. I don’t [deleted] care who the [deleted] you are, if you are not interested in Cool and Rare American Vintage Electric Guitars and you are just trying to sell me your [deleted] rubbish, I will not even acknowledge your pathetic [deleted] existence so, if you [deleted] are stupid enough to read this, you know who you are, [deleted] stop wasting my life you [deleted] [deleted]. I have one very short message to you all, [deleted] off!

*Insert your profanities of choice to suit.

Home renovation

As 2018 was an extremely difficult year, no progress was made on converting the dark, damp and grotty cellar into a safe and secure home for CRAVE’s guitars. Most of the other serious structural work has, however, now been completed, so improving the cellar is the next major job on the priority list, funds permitting of course. Converting the cellar into a ‘guitar room’ is still an intention, so maybe in 2019 some headway can be made.

Looking forward to 2019

Overall prospects for 2019, sadly, look even bleaker than for 2018 with little in the way of ‘light at the end of the tunnel’. Quite what this means for CRAVE Guitars, I have no idea and, frankly, I do not wish to speculate. I will, however, endeavour to continue as long as possible and trust that things will one day turn around.

On a more positive note, what music gear tops CRAVE Guitars’ affordable vintage ‘most wanted’ list for 2019? This coming year, I will once again have to go for something modest and realistic on a tight budget. I don’t expect to get what’s on the list but, just for the sake of putting it out there, it includes…

Guitars:

  • 1960s Danelectro (no specific model)
  • 1970s Fender Stratocaster
  • 1960s Gibson Melody Maker (type 3)

Effect Pedals:

  • 1970s Electro-Harmonix Bad Stone
  • 1980s Ibanez PT9 Phaser
  • 1980s Ibanez TS-808 Tubescreamer Pro
  • 1970s MXR Micro Chorus

Amps:

  • 1970s ‘silverface’ Fender Princeton (with or without reverb)

I may have to sell one or more existing bits of gear in order to fund any purchases in 2019, which looks like it’s going to be another financially challenging 12 months.

Perhaps more importantly, many of the guitars in the ‘collection’ have been stored with a close friend for far too long while I got our act together. I am hoping that the ones that are not already here may get repatriated very soon. Even if the cellar may not be ready for them yet, the intention is to bring them home and reunite the ‘family’ again early in 2019.

Music

For 2019, I have managed to secure tickets to see Bob Dylan and Neil Young co‑headlining at Hyde Park in London for July 2019, assuming that it will be possible to go. I’ve seen Neil Young before, and very impressive he was too, but this will be my first time for Bob Dylan. The pair may be rock’s ‘old guard’ but it should still be a unique event worth witnessing.

There are no specific albums that are eagerly anticipated for 2019, so let’s just see what happens.

Musings

Much depends on capacity and resources but I am still contemplating an appropriate companion piece to the ‘Potted History’ series for 2019. All will, I hope, be revealed at some point in the New Year, ceteris paribus (but I’m not committing to exactly which New Year!). Such endeavours take up an incredible amount of time and effort. Is it really worth it? I really don’t know and it is probably not up to me to judge. The prospective audience is very limited, not only in total numbers who might read and get something from it but also whether it is pitched at the right level on the right medium to make it popular.

Conclusion

So, that just about wraps it up for another year of CRAVE Guitars’ enthusiastic and obsessive approach to conserving underdog vintage heritage guitars and generally promoting the world’s favourite instrument. It was, on the whole, a [deleted] year but one has to remain thankful for what one does have and make the most of it. Wishing you all a healthy and prosperous 2019.

If you and I are still around and still interested in 12 months’ time, why not pop back this time next year to find out if there’s been anything noteworthy to report.

I really ought to spend more time playing guitars, so perhaps it’s time to pick one up and make some noise. Until next time/next year…

CRAVE Guitars ‘Quote of the Month’: “What is so wrong about believing that peace, love and music are essential ingredients for ensuring humanity’s successful future?”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

October 2018 – A Potted History of the Guitar Part VIII

Welcome to what is, for now at least, the final part in this series of articles on the history of the world’s most popular musical instrument.

If you wish to recap on any or all of the previous seven posts before starting with this one, the whole ‘Potted History of the Guitar’ series, can be accessed here (each part opens in a new browser tab):

Having pretty much reached the present day, all that remains is to summarise where we are now and to take a somewhat flippant and imaginative look ahead. The ‘current day’ is a tricky subject, as ‘now’ is at best ephemeral. The future, on the other hand, can only ever be guesswork, even if it can be informed by the past. Perhaps the best way to predict the future is to help to create it, so that means that what happens to the next chapter of the guitar is in our hands. Can we be trusted to behave as responsible guardians of the guitar’s destiny? As Mahatma Gandhi (1869‑1948) said, “The future depends on what we do in the present”. This suggests that what will happen is not predetermined and individually or collectively, we can take action to shape the future.

There are not many images again supporting this article so, apologies to those who like pictures to speak a thousand words. Anyway, without further ado, on with the last part of the chronicle…

The guitar has come a very long way in the last 3,500 years or a road slightly less travelled in the preceding 350 years depending on whose version of the facts you want to believe. The story has finally reached that pivotal moment that lies between the past, which is, on the whole, pretty well documented and the future, which of course isn’t. There is much to be played for and the stakes are certainly high.

It is hopefully of little surprise that the future of the acoustic and electric guitar, as well as all its derivatives and distant relations, is probably well‑assured, at least for the foreseeable future. Whether it survives in the (very) long term or not, the world’s favourite musical instrument is undeniably going to be a hard act to follow, let alone surpass.

As with many industrial and technological revolutions, predictions have proved variable in terms of accuracy. As time passes, change tends to accelerate in both pace and scope. While progress may be inexorable, there is an unseen ‘force’ that tends to counteract unbridled advances and which acts as a bit of a restraint. That set of reins is the very human tendency to hold onto what is familiar while resisting change until it is either inescapable or desirable. This natural ‘drag’ effect has laid waste to many grand ideas and great inventions. Numerous well‑marketed ‘next big things’ have fallen at the hurdle of persuading the general public to take up something new or unfamiliar, especially if one’s respected peers haven’t bitten the bullet of early adoption either. Mankind’s flawed history is littered with countless failed marvels. This phenomenon isn’t, I hasten to add, just a trait of idiosyncratic musicians; it appears to be a fundamental characteristic of the human condition.

Anyway, as usual, I digress. It is time to get back to the point which is basically that whatever you read from here on has absolutely no basis whatsoever in fact and is highly likely to be extremely wrong! My consolation is that few people will regard it as portent or look back to judge its accuracy in a century’s time. There is nothing genuinely prescient here in the vein of Da Vinci or Nostradamus. Apologies if you were hoping for more in the way of a profound visionary insight. Unfortunately, my stock of that ran out last week.

General indicators of change

It is fair to suggest that popular music is often representative of, and in turn is dependent on, broader social, cultural and political movements, and guitars follow in their footsteps. Whether we like it or not, music is integral to our everyday lives, so it is not surprising that it is also inherently powerfully evocative. As a result, it can dramatically affect the way we identify with past events.

One of the key factors that drove guitar evolution has been the trends in popular music, so perhaps musical trends may provide a much generalised hint at parallel guitar developments. Let’s start by considering the (very simplistic) genre movements and the types of instrument used over the last century.  Starting with the post‑classical era, there was jazz (Gibson archtops) and blues (National & Dobro resonators) in the 1930s and 1940s, country and rock ‘n’ roll in the 1950s (Gretsch & Gibson hollowbodies), pop and rock in the 1960s (Fenders and Rickenbackers), progressive and heavy metal (Gibson solid bodies) and then punk (pawn shop guitars) and hair metal (pointy super Strats) in the 1970s. Then we get to the guitar doldrums of electronica, new age and rap in the 1980s, followed by revitalised guitar music of alternative, grunge in the 1990s, and indie (retro guitars) nu‑metal (PRS) and dance in the 2000s, etc. I struggle to think of a musical genre that so far defines the 2010s or perhaps many distinctive guitars to go with them. So there is some kind of link going on here. Google has attempted to map the progression of musical genres from 1950 to the current day (take from it what you will).

The type of guitars de jour used by famous musicians, including artist associations, during these epochs often reflected the style of contemporary music they played and these have largely been well covered in previous parts of the story. Just think of Chet Atkins with his Gretsch 6120, Buddy Holly with his Fiesta Red Fender Stratocaster, The Beatles with their Rickenbacker 300s, or Jimmy Page with his Gibson Les Paul Standard and EDS-1275 double neck. The various interconnections are manifold and too many to mention here, and many have been captured in photographs to become iconic in the annals of rock history.

Cinema and television music regularly use key songs to catapult us back in space and time without the need for narrative exposition to describe what’s happening. Just think about classic movies such as American Graffiti, Stand By Me, Almost Famous, Saturday Night Fever, The Breakfast Club or 8 Mile among many, many others. Those random examples don’t include the numerous biopics (e.g. Sid & Nancy, Walk The Line, The Doors) and musicals (e.g. West Side Story, Grease) or original scores (e.g. Paris Texas) that use familiar, memorable and/or popular music to transport us to another ‘reality’. Then there are the one‑offs like the mockumentary, This Is Spinal Tap. TV programmes also picked up the strategy for domestic viewing since the 1960s and often featured manufactured artists such as The Monkees or The Archies. The lists of relevant examples are endless. Music is used to draw the viewer into the director’s vision of a certain bygone era. Many of the sound tracks of our lives rely heavily on evocative (guitar) music to manipulate us emotionally and, more importantly, intentionally.

The way that environmental factors affect local communities may spark a genre direction that is then promulgated more widely. For example, one could point to the rise of electric blues in Chicago, soul in Detroit, Mersey beat in Liverpool, punk in New York and London, rap in Los Angeles/Philadelphia, or grunge in Seattle, etc. What we cannot predict is what or where any future musical revolutions (if any) may emerge, from where, and what step‑change responses guitar builders may then make.

As with many other aspects of our 21st Century lives, the nature of music, how it is made, distributed and accessed suggests that anything genuinely ‘new’ will find it much harder to stand out from the mainstream. What is already there will continue in some form and anything new will simply be added to it, often at the margins of existing genres, hence the proliferation of sub‑genres, e.g. thrash or nu-metal in rock; house and techno in dance; raga and dancehall in reggae; dubstep and grime in urban music, etc. One only has to compare and contrast the mind boggling varieties of heavy metal music and then consider how they continuously diverge, converge and cross‑fertilise in order to keep it fresh and vibrant.

While some technological change may be more predictable, social change and the music that characterises it is certainly more unpredictable. When one looks at something as specific and tangible as the guitar, it becomes increasingly risky to anticipate with any certainty what change may occur over an extended period of time, say the next century or so.

One view is that we are powerless and don’t need to think about it, as what will be, will be. Another is that we wait passively and be subject to what transpires with little or no influence over it. A third way may be not to accept the status quo and take positive action to stimulate change, which can happen in oddly random ways. Being of an opinionated sort, I tend to fall into the latter camp. Apologies, that probably actually doesn’t help much!

Perhaps the biggest challenge to the guitar’s supremacy is likely to lie in the digital revolution that really started to make an impression in the 1970s and 1980s. Part of the reason for the guitar’s seemingly unassailable success has been that it is a hugely expressive and flexible instrument, which actually makes its nuances extremely difficult to replicate in a world constructed entirely of binary 0s and 1s. We shall see whether digital advances can fully overcome the difficulties in recreating the subtleties provided by a very analogue instrument in the hands of discriminating (and generally quite conservative) musicians.

The evidence so far suggests that digital is making ever increasing inroads into the analogue guitar’s dominance and the discernible gap between analogue and digital output is decreasing all the time. How long will it be before even the most ardent luddites finally admit that they can’t really tell the difference (despite what they may say outwardly)? However, it isn’t just the sound of guitars that appeals to guitarists; it is also the feel and the look of them that matters, as well as how they allow musicians to communicate with each other in unspoken ways.

New generations of guitarists, however, may be looking for something very different from their predecessors.  What form will ‘the shape of things to come’ take? Will it be all hyper‑modernistic and crammed with tech and flashing lights and built from materials we cannot yet imagine, or will it be the same old bits of tree wood crafted into the familiar shapes of Telecasters, Stratocasters, Precisions, Les Pauls, ES‑335s and SGs that we covet today? Only time will tell how things pan out and it will be for future authors to use the convenient assistance of hindsight to determine and document what path the history of the guitar takes from here on.

Looking and learning from the past, one might simply extrapolate forward. Future guitarists may well be like their ancestors and pragmatically seek to mix the best of the past with the best of what’s to come, regardless of whether it is analogue or digital. My personal prediction is a typically ambiguous ‘sit on the fence’ one, in that guitars will probably become increasingly hybrid if they are to keep ahead of other comparable instruments. Let’s face it, there are not really any threats` to the guitar’s dominant popularity at the time of writing and it has always been a continuously evolving instrument, so it would be of little surprise if this were to continue. While the 1980’s temporary trend for synth and electronica attempted to eradicate guitar music in the minds of popular listeners, the guitar has proved very resilient and difficult to displace.

Since the 1970s, the guitar has been used to trigger digital electronics. However, while both signal tracking and polyphony still present problems, these barriers are gradually being overcome. There have been several attempts to introduce effective guitar synths over the years but they have really been analogue or digital filters activated by either an ordinary guitar pickup or by discrete signals from a hexaphonic pickup. Hex pickups, which output a separate signal for each string, were often added to an existing guitar and used to transform it into a MIDI (Musical Instrument Digital Interface) controller while still able to be used as an ordinary guitar. MIDI was a standard specification published in August 1983 by Japanese electronics giant Roland and American synthesizer company Sequential Circuits, and is commonly used to control electronic audio equipment. While attempting to revolutionise guitar music, Roland’s excursions into guitar synths since the 1980s have still relied on a standard guitar as its starting point.

Other Japanese companies specialising in electronics have also experimented with MIDI control of external synthesis engines, for instance guitars from Casio (DG20) and Yamaha (EZ-EG). It seems incredible to think that these early electronic instruments are now being considered as ‘vintage’. Today, there are now plenty of guitars on the market with MIDI capability built in. Technology has moved on and the fundamental concepts of a digital source are now ripe for being reinvestigation and improvement.

Other pioneering companies such as Line 6, now owned by another Japanese giant Yamaha, introduced their ground breaking digital modelling preamp (the Pod) and digital modelling guitar (the Variax) to indicate the direction in which development might go. Line 6’s philosophy inspired and influenced subsequent successful products such as the Kemper Profiler and the Fractal Audio Systems Axe-FX. Computer control of complex parameters, presets, firmware and downloads are commonplace for amps and effects in the 2010s and we can certainly expect this trend not only to become de facto but also to become a requirement in the near future, so a laptop at live gigs is already almost a necessity to keep your rig running smoothly – not a comfort zone for many analogue technophobe musos.

Guitar making cannot stand still and neither should it. Even the companies with a century or more of history, such as Gibson, Gretsch and Martin, have to keep moving forward or risk being overtaken. However, the tightrope of appealing to customers who appreciate the heritage is also key to the future success of long‑established manufacturers. Newer, smaller companies, though, are not constrained by the time capsule factor.

It is probably safe to say that the future is likely to be a practical symbiosis of both the familiar to satisfy the conservative traditionalists and the whizzy new gizmos to appeal to the technologically savvy experimentalists and neophytes… just as it always has been if fact. Even Gibson has been toying with the addition of digital features into its guitars, including the Les Paul HD.6X Pro and the Firebird X models. Intriguingly, Fender and other major brands have yet to declare their hands. It will be the fine balance between the opposing forces that will enable lasting incremental change, via ‘chimera’ guitars, rather than a number of fundamental radical shifts. That eventuality could prove a bit boring though, don’t you think? However, sadly, it also seems to mirror the way that modern popular music is going as well?

Leaps of unadulterated conjecture:

This next section is pure fantasy and should not be relied on as authentic in any way. It came from an idea that it can sometimes be fun to imagine what things might be like in some near or distant future. One hopes, though, that what follows doesn’t come to represent some form of self‑fulfilling prophecy.

It may be that the guitar itself could become superseded by something completely different from what musicians (rather than video game players) use today. Could it be possible that something along the lines of the PlayStation ‘Guitar Hero’ controller may someday make inroads into real instruments to create real music? I would anticipate that the majority of guitarists would sincerely hope not.

There are already some very modernistic looking instruments out there, such as the HTG Hyper Touch and the Misa Kitara (note the use of the Greek name kitara from Part I of this long story). Are these all‑electronic ‘guitars’ the sorts of instruments that will replace our beloved classic designs and become de rigeur in the near future? Alternatively, perhaps the electric guitar could somehow morph into some form of fully digital instrument via the route of hybridisation. As a logical conclusion, is the ‘Digital Guitar’ with analogue playability a holy grail and, if so, for whom? Here are some current digital guitar innovations from the 2010s…

So… suspend your disbelief for a few minutes and take a tentative look ahead to the scary world of AIs, AAs, AVs and AM (spoiler alert – these acronyms may seem familiar but in this context, they don’t mean what you think they mean today). You will be assimilated. Resistance is futile. Read on…

10 years’ hence (c.2028):

Analogue vs digital – Digital technologies will be used increasingly to enhance the analogue signal chain rather than usurp it completely. We have already seen many examples of this appearing in effects and amps, so there isn’t really any clever insight in mentioning it. Digital control of analogue signals is already becoming commonplace especially in delay and modulation effects where digital manipulation gives much more precise control over what happens in the analogue domain.

It remains unpopular to sample the original signal through an analogue to digital converter (ADC), mess around with it and then put it back through a digital to analogue converter (DAC) to turn it back into a signal for further processing. Many purists say that the act of conversion using today’s chips taints the original signal. It will be a while longer before we make that bold step of a fully digital signal chain from fingers to ears but it is getting ever closer. It will happen but possibly not by 2028, mainly because of the difficulty in engineering effective fully digital instruments and loudspeakers.

Research will continue to develop a truly digital guitar ‘pickup’ that could compare to current electromagnetic pickups and provide the first step to more complex processing in the future. Digital modelling using DSP (Digital Signal Processing) chips will continue to improve and will become almost indistinguishable from analogue electronics in effects, amps and digital audio workstations (DAWs). There will be a hardcore fan base that remains wedded to the old school stuff for many, many years to come. The guitar itself is highly unlikely to become fully digital in the next 10 years, if only because there are far too many dogmatic people invested in preserving the status quo. Auto‑Tune for the guitar anyone?

Guitar Making – In the near future, it is highly unlikely that wood will be superseded by any other material as the primary input for the majority of guitars. Wood has proved over millennia to be a very flexible, durable renewable material. Let’s face it, it can also look wonderful. One major advantage of wood is that it contributes towards the organic tone and touch of an individual musical instrument. Many alternative materials have been used in the construction of guitars since at least the 1920s, including plastics, metals, carbon fibre and a wide variety of composites. To‑date, though, wood has prevailed in terms of structural integrity allied to inherent musicality. What will change, though, is the shift away from the use of endangered exotic hardwood species such as rosewood, ebony and even mahogany to more sustainable species. For instance Pau Ferro (Libidibia Ferrea, a.k.a Bolivian rosewood) is rapidly replacing the CITES‑restricted rosewood (varieties of the genus Dalbergia) as a popular fingerboard material. Quite how fussy musicians will accept unfamiliar wood substitutes, will be determined in due course. What is clear is that guitarists really have no choice but to go with the ecologically acceptable flow in the long‑term.

Like their classical musical counterparts, the guitar itself (whether acoustic or electric) will remain very much a natural instrument for a good few years yet. The guitar will still be supremely popular and will be making great music all over the world. Guitars will be made by a broad range of entities from one man band local custom luthiers up to multinational mass manufacturers. Competition, particularly from China, will be a threat to many established western companies until their economic bubble bursts, which it eventually will at some point.

Recorded music – The vast majority of recorded guitar music will be produced on digital equipment with a few retro studios still using analogue equipment including valve preamps and tape machines. The relative accessibility of convenient digital recording equipment will continue to provide openings for all sorts of artists from the home musician to the professional mega bands using famous dedicated studio facilities such as the famous Abbey Road Studio in London. Recorded music will be increasingly distributed and accessed online, although legacy formats will maintain a solid niche popularity.

Live music – Live music will continue to grow in popularity to become the cornerstone for many successful artists, provided that they do not price themselves out of live appearances and that over‑zealous regulations don’t stop large live events from taking place. PA and monitoring systems will continue to improve significantly and sound pressure levels at venues will be severely restricted, removing some of the visceral excitement of the live music experience.

30 years’ hence (c.2048):

Analogue vs digital – Digital will be the primary domain in which music will be made, recorded, distributed and accessed. The guitar will remain analogue, although it is likely that the entire chain from the pickup onwards will be predominantly digital. However, as with current classical instruments and music, there will still be an important place for traditional analogue guitars. Amps and effects are likely to be almost totally digital. Successors to the analogue electromagnetic pickup and the loudspeaker will be introduced to a point that digital sound will be common if not universal. ‘Old fashioned’ guitars will remain very popular and will experience regular revivals and rejuvenations, even if the overall battle will be won by the digital technologies of the 2040s. New digital connectors will proliferate, as the currently ubiquitous USB port will long since have been superseded, and the jack pug/socket will be purely of vintage interest.

Guitar making – Most of the large manufacturers will be producing some sort of digital instrument as the norm, even if the vital interaction between fingers and strings will remain as it is now. All guitar tone woods will be derived from sustainable sources by strict regulation and use of rare species tightly controlled (outside the unavoidable black market). The use of alternative materials will be in full swing, reducing the reliance on today’s natural materials. New guitars will be built to be recyclable. Automated manufacturing will be the norm and the demand for traditionally made guitars will be catered for by numerous specialist guitar builders. Pure wooden analogue guitars will be vintage only and regarded with the same respect as classical instruments are now. Guitar development will be relegated to refinements around the margins, rather than core revolutions. Hybrid instruments will be fighting a rear‑guard action, with digital beginning to win the final battle. Competition to the guitar will continue but will not succeed… yet.

Recorded music – Digital will almost totally dominate recorded music production, distribution and access. Diehard analogue fans will be regarded as geeks and nerds. Vinyl albums will, however still persevere… just.

Live music – Like recorded music, live music will be, apart from the musicians themselves, almost universally digital. ‘Loud’ live music will be a thing of the distant past. Music venues will begin to disappear as discrete locations, with personalised performance content delivered direct to the individual.

50 years’ hence (c.2068):

Analogue vs digital – Analogue guitar music will be like classical music is today, a popular, niche and a largely historic pastime. All other aspects will be digital.

Guitar making – Standardisation and construction will be largely prescribed. Hybridisation will just about have peaked and on its way out. The majority of guitar production will move towards making AIs (Artificial Instruments). The focus will be on the technical facets of music making, rather than subjective, emotive ones. Guitars as we know them now will be of heritage interest.

Recorded music – Music will be manufactured in the digital domain with just a few maverick analogue‑obsessed musicians beavering away in the minority. The vast majority of contemporary recorded music will be created electronically, with few outmoded musical instruments as we know them now being used. Many artists will be AAs (Artificial Artists), rather than by artistically inclined human beings – the latter will concentrate on performing historic pieces from the golden heyday of guitar music.

Live music – There will no longer be a need to travel to a discrete venue where music is performed in person to a collective audience. ‘Live’ music will be created in computers, customised to an individual’s tastes and accessed in the home, in a domain known as an AV (Artificial Venue) giving the sight, sound and feel of a venue.

100+ years’ hence (c.2120):

Analogue vs digital – Analogue guitar music will be an historic vocation and largely a lifestyle pastime. All other aspects of ‘modern’ music will be entirely digital. Some authentic old‑style music will be recreated on historic instruments for research purposes, rather than as entertainment.

Guitar making – Even the last few old‑school luthiers will be migrating to alternative materials, automation and digital electronics. Hybrid instruments will be seen as a thing of the past. AIs will be commonplace and there won’t be a need for human musicians to learn the art or skills needed to make any type of contemporary music.

Recorded music – Popular music will be artificially created without the need for accomplished musicians. Music will be constantly morphing on a second‑by‑second basis, known as AM (Artificial Music).

Live music – Performance capture will be produced electronically and experienced direct by the listener’s visual and audio receptors, bypassing the unreliable eyes and ears altogether. Finally, the digital signal path from computerised source to the recipient’s brain will be complete and will require no human intervention whatsoever.

Alternative Reality

Or… in some alternative, perhaps more desirable dimension, the unwritten future could well be pretty much as it is today, with new generations doing just what we do now, rocking to good old electric guitar music. To many guitarists, the tactile and synergetic relationship between musician and his/her guitar in full flow with other musicians is unbreakable and simply cannot be usurped by some dystopian digital future scape.

One trusts that there will always be a place for creative artisans and a desire or the musically minded to enjoy the fruits of their vision for the guitar of the future. It is encouraging that many well‑known guitar makers are actually stepping back in time in order to move forward. This isn’t the paradox that it may first seem. Savvy guitar builders are investigating in great depth what made great guitars great in the first place and identifying what musicians actually want from their instruments today. Much of this current R&D is leading to a number of findings that indicate that what was important 100 and 200 years ago (and probably longer) is still important today but with modern consistency and reliability.

Perhaps the past masters did get it largely right in the first place and that is why their products, new or vintage, are still desirable artefacts today. While traditional manufacturers like C.F. Martin use modern production methods for some parts of the building process, they are also still using tools and equipment employed by successive cohorts of luthiers, as well as relying on many of the basic techniques and skills refined and passed down from one generation to the next. Most of the top flight guitar builders also work very hard to ensure long-term supplies of precious tone woods to make into future guitars. This focus on the best‑of‑the‑best perhaps suggests that guitars may well remain, for the large part, relatively familiar in 10, 30, 50 and 100 years from now but with improvements to the detail. Perhaps it takes that bold flight of fancy to realise that we already have what we and future generations of musicians actually need. Owning inspiring guitars inspires guitar playing and results in inspiring guitar music.

There really is no point in speculating any further ahead. The likelihood is that, even with advances in medical technology, most if not all of us reading this in 2018 will not be around to see anything beyond c.2020. The guitar is dead, long live the guitar. The passage of father time will inform just how accurate these flights of fantasy (or descents into nightmare) really are. Clearly, the further one looks into the future, the less precise any predictions become. Welcome to tomorrow’s very scary ‘brave new world’.

I, for one, am certainly not laying any bets. I’d like to think that there is something about our very personal instruments that will endure for many decades, if not centuries. If we lose that quintessential ‘something special’ about making guitars that make guitarists that make music, it will all have been for nothing. Watch this space.

Conclusion

So, that’s it. The long‑running and on‑going story of the guitar has finally reached a logical stopping off point, at least for now… However, it not the end of the story by any means. Somewhat disappointingly, the denouement to ‘A Potted History of the Guitar’ series seems to be a bit more of a whimper than some almighty bang. After so much history and so much personal investment in researching it, it seems a bit of a let‑down to leave the guitar’s evolution ‘hanging’ without some sort of definitive resolution to the script and with the various loose ends neatly tied up. Nevertheless, remember that this is not a fictional piece and let us not forget that this is definitely not the epilogue.

‘They’ say that a picture speaks a thousand words. So, to sum up the 3,500‑year, 8‑part journey in a single image that tells the story of the guitar from its origins to the possible near future, here is a fitting 27‑picture montage that possibly speaks approximately 50,000 words. Basically, I could have saved 9 months of my life and just posted this one composite picture. That, I guess, is one of the benefits of hindsight. I hope that you’ve enjoyed the expedition with me and that, like me, you have learned a little something about the guitar along the way. You wanted a potted history of the guitar? Well, how about…

From this point in time onwards is the start of the future and, whatever happens next. It will be fascinating to experience the on‑going next instalment of the long story and to observe with trepidation and excitement what is to unfold. Let us try to make it a bright and positive outcome for everyone who loves The Guitar and Great Guitar Music. Thank you for reading. Enjoy the future, whatever it holds for us guitar aficionados.

End of Part VIII and the end of this series

Now… I need a break from the relentless rigmarole of the research and write routine, which has, for the best part of a year (or more), been on top of everything else. As mentioned previously, at some point, I might adapt the eight separate ‘Guitar History’ parts into a more coherent and accessible feature set on the CRAVE Guitars’ web site.

Very shortly, I will try and start to prepare for 2019’s (hopefully slightly less) epic partner piece to this year’s gargantuan opener. For the rest of this year, it is back to opinionated hum‑drum ‘normality’ with stand‑alone observations of a more topical and transient nature.

One thing I have noticed is that I haven’t been playing enough guitar in recent months, hardly any at all in fact, which is deplorable. So perhaps now that this particular endeavour is over for now, it’s time to practice what I preach, pick up a lovely vintage guitar and plink away for a bit of cathartic enjoyment. At least, in doing so within the context of the past, I now have an enhanced appreciation of the history that led to it coming into my hands and why it is so important to conserve the heritage for that future. Until next time…

CRAVE Guitars ‘Quote of the Month’: “Let’s be honest, the future is all we really have and it is the only thing we can do anything about”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

September 2018 – A Potted History of the Guitar Part VII

Welcome back to the latest in a long series of articles chronicling the history of the world’s favourite musical instrument. Last time, we covered the advent of production solid body electric guitars during the guitar’s ‘golden era’ from c.1950-1965. That article also covered some relevant later events, but the essence was about a period of intense invention and creativity, hence why it deserved a separate article dedicated to it, even though much of the content would be familiar to many.

This month’s article mostly focuses on ‘what happened next’ between c.1965-1987, although it does also cover the subsequent period up to the current day, albeit in less depth than the earlier years. Depending on how the rest of the story is covered, this 7th part is likely to be the penultimate episode.

If you’ve been following the various twists and turns along the way, you’ll know that I have tried very hard to strike a balance between light entertainment for the general reader and the level of detail that would appeal to the needs of the nerdiest of guitar geeks out there. As previously stated, this is not an academic thesis – I just don’t have the time or resources to reference every element along the way, so it probably will never make it into book form, which is a bit of a shame but ç’est la vie. However, once the 3,500 year history has been finished, I may try to bring it all together as a ‘box set’ feature on the web site, so it will be easier to find and come back to than monthly instalments. It also provides the opportunity to correct the content. I may also add a bit off the original longer version back in (!!) and to balance the various parts as a more coherent whole.

You may wish to recap on previous articles before starting here at Part VII. If so, the previous segments of ‘Potted History of the Guitar’ series, can be accessed here (each part opens in a new browser tab):

I hope that you’ve enjoyed the journey so far and will stick with it for just a little longer. For me, it has certainly involved a huge amount of hard work researching and learning along the way. There is an enormous amount of information that had to be excluded in order to make it digestible in an online format. As always, while I have been diligent, some errors and omissions will inevitably have crept in. Not only do I apologise if that is the case but also, I welcome feedback from readers in order to correct or clarify. I would also encourage readers who might wish to look at things either from a different perspective or with a different level of detail to explore the fascinating world of guitars for yourselves.

There are not many pictures this month, as the subject matter is largely narrative‑driven. Sorry about that, photo fans.

Post-Modern Reconfiguration, Rejuvenation and Consolidation

It has become generally accepted that the electric guitar’s so‑called ‘golden era’ started at the beginning of the 1950s with the introduction of Fender and Gibson’s solid body electric guitar models and ended in the mid‑1960s around the time that Leo Fender sold up in early 1965, followed by Gibson in 1969.

On the face of it, the years immediately after the mid‑1960s would appear to be of little historic interest, particularly as far as investors and ‘serious’ collectors are concerned. While the 1950s and early 1960s have been very well documented in countless learned tomes, the subsequent years have tended to be characterised by vociferous opinion and anecdote in a relative vacuum, rather than subject to objective scrutiny.

The Internet has, perhaps unsurprisingly, encouraged many already polarised opinions to become even more extreme. Assertive and often throwaway hyperbole of many self‑appointed ‘experts’ has possibly been consistently exaggerated to the point that they have gained some sort of historical validity. Widely read ‘unpopular opinion’ is often misinterpreted as indisputable definitive evidence. It isn’t gospel; there was more to it than what many would have you believe.

This version of the ‘facts’ is arguably simply that and, while every effort has been made to remain impartial, it should be read with a degree of realistic scepticism. This doesn’t mean that there wasn’t some ‘smoke without fire’, just that the flames may have been fuelled by circumstances and intensified by ill‑informed prejudgment.

The music industry wasn’t alone in coming in for acerbic over‑criticism; the American automotive industry was also subject to similar issues during 1960s and 1970s. The parallels extend beyond the superficial with the demise of many historic car brands and the inexorable rise of Japanese competition. As with guitars, some of these old models are now becoming highly sought after. The guitar industry during the latter part of the 20th Century, it seems, was symptomatic of wider deep‑seated socio‑political problems in the world’s largest capitalist economy.

Actually, ‘what happened next’ is an equally fascinating tale and one that is worth spending a little while looking at. At the same time, it’s also worth standing back and looking at the bigger picture as events unfolded. While it’s all a matter of degree, what transpired was rife with intrigue and machination. The appeal of these transitional years is one of the reasons that CRAVE Guitars tends to focus on ‘forgotten underdog’ and quirky cool American electric guitars from between around 1960 and 1989, although not exclusively.

Was that all‑too‑brief 15‑year ‘golden era’ the end of the story? Will guitars built in the ‘dark ages’ between 1965 and 1987 remain ignored most as gross errors of judgement? Will there be another defining period of electric guitar evolution or will musicians spend their lives experiencing mediocrity by default while harking back to that unobtainable time viewed through rose‑tinted spectacles? Perhaps digital technology will deliver the next step‑change with some Darwinian mutation that future writers will look back upon and write about. OK, enough of the rant, on with the story…

The Catalysts

The trouble really started once both Fender and Gibson been acquired by faceless corporations used to running commercial businesses, rather than important customer‑led operations. Despite post‑war prosperity and growth, the period between the mid‑1960s and the mid‑1980s could possibly be described aptly as eventful and tempestuous. In hindsight, whichever way you look at it, the sale of the industry’s ‘big guns’ was a 20th Century watershed for guitar building.

Firstly, let’s take a quick look at what actually happened immediately after the ‘golden era’ drew to a close circa 1965. The subsequent corporate merger & acquisition activity impacted directly on American musical instrument manufacturing up to the end of the 1980s. A few choice examples may help to illuminate the significant strife that befell the industry for a couple of decades (in rough chronological order)…

Rickenbacker – The only one of the major American brands that didn’t ‘sell out’ during the 1960s was Rickenbacker. They had, in some ways dodged that particular bullet, as Adolph Rickenbacker had already sold his company to music industry businessman Francis C. Hall in 1953. In retrospect, the move to transfer the undertaking and to keep it in safe hands seemed both pre‑emptive and positively prophetic. Arguably, the timing enabled Rickenbacker to capitalise on 1950s creative growth and become more resilient to what was to come. RIC (short for Rickenbacker International Corporation) has remained under the ownership of the Hall family since 1953 with John C. Hall as CEO at the time of writing.

Fender – After Rickenbacker, Fender was the first of the big names to capitulate to big business ambition. In 1965, Leo Fender sold his company to CBS (Columbia Broadcasting System) for just over $13m. The reason often given for the sale was Leo Fender’s health, although an injection of capital funding probably was also contributory. Other perspectives cite Leo Fender’s desire to pursue new ideas, which he possibly couldn’t do while running the company. CBS started making changes almost immediately and expanded capacity at Fullerton to increase supply. By agreement, Leo Fender was prohibited from setting up another music instrument company for 10 years, after which he went on to found Music Man (1974) and then G&L (1980). After 20 years under CBS control and on the brink of total collapse, division president William Schultz bought the company, forming Fender Musical Instruments Corporation (FMIC) in 1985. What followed was a period of intense restructuring, with guitar production temporarily moved to Japan for approximately two years before resuming full American manufacturing with the launch of the American Series guitars in 1987. U.S. manufacturing was moved from Fullerton to Corona, California and its headquarters were relocated to Scottsdale, Arizona. Fender was once again back on the path to success as an independent company and has remained so ever since.

Danelectro – Danelectro was originally formed by entrepreneur Nathan Daniel in 1947. Daniel built his business on the back of large scale, low cost department store and mail order demand for electric guitars, often branded as Silvertone and Airline. This enabled him to start building instruments under the Danelectro brand from 1954. By 1966, Daniel sold Danelectro to industry giant MCA (Music Corporation of America). MCA tried unsuccessfully to introduce the Coral brand and to restructure its distribution network. The outcome was that Danelectro ceased production altogether just 3 years later in 1969. The brand was resurrected by the Evets Corporation in the late 1990s and, after several faltering attempts to recapture market share, Danelectro remains in operation as a successful American company with overseas manufacturing based in China and Korea.

Gretsch – Gretsch was originally founded by Friedrich Gretsch in 1883. Two years after Fender and one year after Danelectro, Fred Gretsch sold the family business to the Baldwin Piano Company in early 1967. After many organisational troubles including relocation, factory fires, Chet Atkins withdrawing his endorsement, and misjudged model decisions, Baldwin finally ceased production of Gretsch instruments by 1981. Fred W. Gretsch acquired what little remained of the company in 1985, basically just the Gretsch name and rights ownership. After a number of abortive efforts, consistent output was eventually re‑established in Japan. Rockabilly guitarist Brian Setzer became a key endorsee for Gretsch in the 1990s and consumer interest in the brand was rekindled. Retaining family leadership, Gretsch has been under the patronage of Fender since 2002 and the famous brand is once again a significant player in the guitar industry.

Gibson – Gibson was really the last of the large American names to succumb to corporate ownership. Gibson’s parent company, Chicago Musical Instruments Ltd (CMI) followed the competition in 1969 when Gibson was taken over by a South American brewing company called ECL and then subsumed by Norlin Musical Instruments in 1974. Gibson survived cost‑cutting, relocation to Nashville and general mismanagement largely intact, although its hard‑earned reputation was severely tarnished. Gibson eventually returned to private ownership in 1986 through a consortium management buyout. Despite a major financial crisis and bankruptcy protection initiated in May 2018, there are signs of a positive future for the company.

These were just some of the big players who were able to weather the economic storms during the second half of the 1960s through the 1970s and into the 1980s. In addition to the big names, plenty of other well‑known American companies failed to survive, including:

  • Valco merged with Kay in 1967; a move that included familiar names such as Supro and Airline. However, the newly combined company went bust in 1968
  • National Dobro merged with Mosrite before the latter went bankrupt, also in 1968
  • Harmony lasted until 1975 before it ceased trading

Those that survived the volatility would continue to fight for survival at best. Overall, when viewed in hindsight, it proved a disastrous phase for American guitar making and collectively one that isn’t widely documented, other than in individual circumstances. The ‘golden era’ was, seemingly, definitely over.

As is often the case, the causes of American guitar manufacturing woes between the mid‑1960s and the mid‑1980s are quite complex, based on deep‑seated structural flaws. Looking at the circumstances strategically, there were probably, amongst many other contributory factors, five key issues…

  1. Industry structure and stability – Inward investment and backing of large business should have provided a positive commercial injection to guitar companies who were either struggling with financial difficulties or were unable to grow quickly enough with existing management structures. What actually happened was that big businesses, as is their wont, were looking to cut costs and increase profit, seemingly unaware of the impact that they were having. The large companies tried to stimulate demand by experimenting and introducing new products without assessing whether what they were making was adequately meeting consumers’ needs. For small agile companies, risk taking was a vital part of the creative process, while the bigger firms focused on large scale, efficient production methods, conversely heightening the risks of failure. Remote and disconnected governing bodies tended to dictate business decisions based on balance sheets and shareholder return, rather than customer satisfaction. Arguably, though, the businesses were in dire need of ‘better’ rather than ‘different’ management both before and after takeover.
  2. Industrial relations – Strict operational disciplines, controlled production processes and rigorously applied policies are a fundamental requirement of larger bureaucratic organisations. These management styles were generally not part of the music industry’s ‘way of doing things’ at the time. Companies needed to be managed effectively rather than efficiently and, unfortunately, the pendulum swang too far towards the latter. Business managers exhibited a flagrant disregard for the expertise and skills required to make consistent, high quality musical instruments. Production facilities were relocated, often giving long‑term highly experienced luthiers a ‘move or go’ ultimatum. In addition distribution and dealership networks were changed with little regard for what went before. Unhappy employees and belligerent trade unions led to heated industrial disputes (and worse), thereby causing significant leadership and management problems. Decades of accumulated knowledge, skills, expertise and, perhaps importantly, attitude were lost to the industry in a short space of time – something that would take years to rebuild. The outcome was that quality fell, exacerbating existing deficiencies elsewhere in the industry.
  3. Industry culture – New corporate owners did not fully appreciate or take the time to understand why the guitar industry worked as it did, resulting in fundamental mistakes internally and externally. The latter disenfranchised those involved in the supply chain from distributors to dealers and, ultimately, impacting on paying customers. Crucially, working musicians’ requirements were not being met and, with that dissatisfaction, brand loyalty diminished as professional guitarists looked elsewhere for alternatives. In addition, musical tastes were rapidly changing and short‑lived fads required nimble organisations that knew how to adapt to changes quickly and appropriately. Smaller companies that were better‑tuned into what was going on could flex more easily. The larger corporations, however, were unable to spot change and respond, leading to mismatches and time lags between demand and supply. Many commentators suggest that it was because musicians weren’t running the show. However, guitarists don’t necessarily make good business people (or vice versa!), which might have contributed to the difficulties. Significantly, two of the most influential guitar innovators – Leo Fender and Ted McCarty – didn’t play the guitar at all. Nevertheless, they were effective leaders because they ensured that professional artists were closely involved with business decisions. Importantly, the time when musicians were listened to and relationships were actively cultivated had fallen by the wayside.
  4. Supply problems – Availability of consistent materials, particularly the all‑important tone woods, created challenges for large‑scale American production. Variable density and therefore weight of some imported tone woods meant that it was difficult to manufacture to dependable standards. Depending on the combination of materials, the shortage of quality inputs affected builders to different degrees. Around the same time, sustainability and environmental factors were becoming an issue, leading to further supply issues. Manufacturers started looking to alternative materials including metal (e.g. Kramer, Travis Bean), plastics (e.g. Ampeg/Dan Armstrong) and composites (e.g. Gibson) that were intended to improve consistency and streamline manufacturing processes. Other moves included building guitars not from single pieces of difficult to acquire, expensive wood but from cheaper, smaller, more available cuts. Consumers saw such actions as negative and symptomatic of other perceived underlying problems. Unfortunately for the manufacturers, customers were not impressed by ‘good intentions’ and the changes were seen as cost‑cutting measures taken a step too far. Many consumers saw through superficial claims and resented the big companies for making what they felt were false marketing claims.
  5. Far Eastern competition – Enterprising Japanese companies, revitalised by post‑WWII recovery and able to observe from outside, spotted that American labour and manufacturing costs were contributing to a combination of poor quality and high prices – an equation that would present opportunities to penetrate a previously U.S.‑dominated market. Companies such as Ibanez and Yamaha did two crucial things. The first was to use their structural advantages to make high quality instruments at lower cost, and to produce them in large enough numbers to compete with American products on their own ground. The second thing they did was to brazenly copy iconic American designs, presenting consumers with recognisable products built to (generally but not always) higher standards and sold more cheaply than the American ‘classics’. There is more on the Japanese competitive assault on American guitar makers below. They also used rapidly changing music trends to create openings for entirely new products, including their own designs, thereby beginning to build a strong and more ethical reputation of their own. When the inevitable backlash came (see below), the marketplace had already changed fundamentally.

Lawsuit Guitars and Trademark Protection

During the post‑1965 period, sales of major American brand guitars was in decline and the home industry was in disarray. This provides a broad background against which American companies had to contend. Generally speaking, the way in which the industry and marketplace was organised was not favourable for the likes of Fender, Gibson, Gretsch, Rickenbacker and many others.

The takeovers and general (mis-)management of American firms left the U.S. industry weakened and susceptible to aggressive business manoeuvres. American labour, tooling and material costs didn’t fall, so prices for finished instruments generally remained high for guitars that were increasingly poorly made. It is relatively easy to understand why the 20‑year period between approximately 1965 and 1985 was crucial to reshaping the global guitar making industry.

One particular Japanese guitar maker, Hoshino Gakki Gen, saw an ideal opportunity to enter the fragile American market. Cleverly, Hoshino recognised the potential animosity towards Japanese‑sounding products after WWII and adopted the Ibanez moniker. Incidentally, the Ibanez name was derived from Spanish guitar maker Salvador Ibáñez, who made classical guitars and sold them to Japan from the 1920s. When Ibáñez, failed during the Spanish Civil War (La Guerra 1936-1939), Hoshino acquired the rights to use the name, dropping the accents in the process. Hoshino’s next step was to take over an American company, Elger, which had already been importing Japanese guitars into the U.S. This move gave them ready access to the American territory, initially as Hoshino USA and then Ibanez USA. From 1970, Ibanez began systematically targeting and imitating popular American guitar models, particularly from Gibson, Fender, and Rickenbacker.

Initially, Fender and Gibson chose not to challenge these foreign copies unless they were identical to the originals, i.e. deliberate forgeries. Perhaps they didn’t see the early copies arriving in relatively small numbers as a significant threat and therefore not worth the lengthy and expensive battles through the American court system with no guarantee of success. Perhaps naively, they may have seen the copies as providing entry‑level experience that would lead consumers to trade up and purchase the ‘real thing’. Nobody really knows for sure. However, by taking their eye off the proverbial ball, the already struggling American brands were storing up a hornet’s nest of latent problems.

The relatively cheaply made Japanese copies often used bolt‑on necks, cheap materials and inferior hardware. Having said that, they were often reasonably well made for what they cost the consumer. The slavish copies appealed to many novice guitarists wishing to have guitars that, at least visually, looked like the more expensive American counterparts without the accompanying high price tags. Notably, and perhaps pertinently, Fender’s own low cost ‘student’ guitar lines (the Mustang ‘family’) and Gibson’s budget models (the Melody Maker) didn’t resemble their upmarket pro‑level instruments, further exacerbating the weaknesses in the eyes of customers.

The Japanese picture at the time is typically complex and confusing, particularly when trying to differentiate the production companies from the brands they made and the importers they used. Some of the companies such as Tokai, Greco, Yamaha and Suzuki followed Ibanez’s lead and jumped on the cloning bandwagon, making relatively faithful copies of American guitars.

The huge Kawai Teisco company was a mass producer that made guitars under many names, including Apollo, Domino, Kent, Randall, Sterling, Victoria and Winston. One brand, Antoria was actually a German company (Framus) that imported Japanese Guyatone (Suzuki) guitars that included replica Stratocaster copies. Others, such as British firm CSL (Charles Summerfield Limited) originally rebranded imported Ibanez guitars. Columbus was another brand that simply imported Japanese‑made guitars under its own name. Hondo was an American company that imported Japanese copies, giving them some home‑grown legitimacy. The Spanish‑sounding Fernandes, on the other hand, was a wholly owned Japanese company that also used the name Burny. Many companies made guitars for other companies, so the picture is further obscured. There were many, many Japanese manufacturers that were largely unknown outside the country but were indirectly contributory to the assault on America and Europe in the 1960s and 1970s, including Fujigen Gakki, the aforementioned Hoshino Gakki Gen (who also used the Tama brand), Matsumoku, Moridara and Tombo.

So… just what were all these Japanese companies actually targeting? In particular, Gibson’s Les Paul and SG models, as well as Fender’s Telecaster and Stratocaster came in for ubiquitous copying. Popular Martin, Guild and Gibson acoustics also came in for replication, as they were the world’s most recognisable acoustic instruments at the time. Acoustic copies including names like Takamine, Morris, Pro Martin and Ventura. Even the fonts used for headstock logos often mimicked the original American brand styles.

As volumes increased, the wave of imports understandably caused problems for the original manufacturers and it was only a matter of time before there was a defensive response. That reaction was based largely on Gibson’s famous Les Paul and particularly the outline shape of the headstock.

In June 1977, Gibson’s owners at the time, Norlin, filed a legal case against Ibanez/Hoshino for copying the Gibson ‘open book’ headstock outline. The case was settled out of court by February 1978, by which time Ibanez had already changed their headstock shape. However, since 1974, Ibanez had been astute enough to foresee the complication and had been developing and improving its own unique Artist guitar designs, thereby circumventing any further rights issues. From 1978, once the lawsuit was behind them, Ibanez focused purely on its own designs.

Despite appearances, there was, in fact, only one landmark lawsuit at the time and it only related to the design of the headstock on Gibson guitars. Presumably, other American manufacturers were watching and waiting for the outcome of the Gibson case. Not looking for potentially damaging confrontation in the courts, other Japanese companies sought to avoid the wrath of the American companies and changed their designs just enough so as not to fall foul of further litigation.

Ironically, some of the Japanese ‘lawsuit’ guitars have since become collectable in their own right. Although many copies that claim to be subject to the lawsuit aren’t, they are just guitars made during the ‘lawsuit era’ of the late 1970s. Generally speaking, Japanese guitar making – having made its mark for better or worse – went on to plough their own furrow in the multinational market, establishing a successful business model on which they could build.

The imitation game hasn’t gone away completely though. Many ‘knock off’ guitars in the 21st Century are emanating from China, where there is little effective means of legal challenge. While some of the guitars originating from China replicate American designs and are produced in large volumes, some of the fakes are appearing in small quantities as very convincing forgeries of rare and valuable vintage instruments.

Also, somewhat ironically, the big American brands struck back by strategically shifting manufacture of lower cost instruments off‑shore. Fender made guitars in Japan from 1982, only later changing the name to Squier to differentiate them from the American originals. Similarly, Gibson started Far Eastern manufacture of Epiphone guitars in Japan in the early 1970s, then in Korea from 1983, before relocating production again in 2003 to a dedicated Epiphone factory in Qingdao, China.

In 1984, PRS guitars was established by luthier Paul Reed Smith and has since become one of America’s major guitar manufacturers. To cater for all price points, PRS also introduced Korean production facilities for its SE‑branded guitars in 2003. While on the subject of lawsuits, after PRS had released the PRS Singlecut in 2001, Gibson filed a trademark infringement claim against PRS for allegedly copying the Les Paul design. Gibson’s lawsuit failed at appeal and PRS resumed production of the Singlecut, albeit slightly altered, from September 2005.

Fender now actively defends its trademarks, which exist in perpetuity, unlike patents that have a limited duration. To illustrate the issues, Fender’s defence of its trademark headstock design reads as follows, “The headstock is the key source-identifying feature of the modern electric guitar. In particular, the shape of the headstock (which, in the types of guitars at issue here, is part of a single piece of wood that also includes the guitar neck) is nonfunctional and primarily serves to identify the brand and model of the guitar. Fender owns trademark rights and federal registrations for the shapes of its headstock designs. These marks are instantly recognizable to generations of musicians and music fans as indicators of the source of Fender’s products and of the immense history and goodwill associated with Fender.”

Furthermore, Fender lost a 2009 application to trademark its guitar designs retrospectively. Opponents stated that consumers had had decades of unopposed exposure to those shapes from a wide variety of other guitar makers. This particular ruling opened the door to many look‑alike guitars, bar the familiar and distinctive headstock shapes.

Rickenbacker, unlike many of its counterparts, trademarks its important designs and vigorously protects them through the courts, hence why there are generally fewer Rickenbacker copies on the market compared to Fender and Gibson clones.

The whole issue of who owns what and how owners’ rights can be protected in a global market rife with replicas is a hugely complex issue and the nuanced legal debates are not for this story, so it is time to close this particular case and move on.

The Fallout and Time for Objective Re-assessment?

The Gibson law suit was, however, a wakeup call for American guitar building, as it proved beyond doubt that they were vulnerable to competition. While it may seem a relatively small isolated incident, it was contributory to the way in which guitar making, distribution and sales had to change. It was time for a shake‑out. By getting back to the basics, the rebuilding of American production that took place from the mid‑1980s resulted in vastly improved fortunes, even though it would take years for several companies to return to prosperity. Gibson and Fender were back in private ownership, Rickenbacker had sustained its business and, although Danelectro and Gretsch would find success, it took some time to regenerate historic popularity.

Despite what naysayers, respected journalists and wealthy vintage guitar collectors will delight in telling anyone who will listen, not all guitars built between 1965 and 1987 (when Fender introduced the landmark American Standards) are bad. Yes, there are many examples of poor quality instruments produced during those ‘dark ages’ but, let’s be honest, that has always been the case. Just look at some of the cheap and nasty instruments from the 1950s and early 1960s produced during the ‘golden era’.

Being a bit provocative and controversial, it is the author’s considered belief that there were many very good instruments built in the 1970s but these tend to be overlooked and caught up in the sweeping generalisation that ALL instruments from that period are sub‑standard. Some unique and interesting models only appeared during the 1970s and 1980s as part of the drive for experimentation. Some of these experiments were often made for relatively brief periods before they disappeared again. As a result, many of these rare examples are highly likely to be of interest to collectors in the future. As vintage prices of 1950s and 1960s guitars are rapidly increasing beyond many enthusiasts’ ability to purchase them, 1970s and 1980s guitars are also creeping up in value and are likely to become the ‘next big thing’ in the vintage marketplace. When they do eventually become desirable, which they will, that critical labelling of ‘poor quality’ is likely to be conveniently forgotten as the wheat is separated from the chaff.

Generally speaking, with the introduction of automated and computer controlled construction technologies, instruments from c.1990 onwards are generally consistently well‑made. This means that poor quality instruments are fewer and further between. Value‑for‑money since the 1990s has never been better with some very good guitars available at relatively low prices compared to the past. Broadly categorising the ensuing years between, say, 1990 and 2000 as a period of rejuvenation, resurgence and consolidation in the face of significant and multifarious challenges including economic downturn. The dawn of the new millennium saw further change including diversification, growth and a degree of reconfiguration. The reality, perhaps obviously, isn’t simply a case of general classification though, so such broad descriptions may best be regarded as a bit of artistic licence on the author’s part.

It may seem strange but it was often the inherent manufacturing variations and inconsistencies that have led to the handmade ‘golden era’ guitars becoming so desirable in the first place. As the idiosyncratic traits of the past have been ironed out, consumers have had ready access to consistent, reliable and higher quality guitars at virtually all price points. However, the increase in standardisation means that many modern mass‑produced guitars are often described as ‘generic’, samey and bland. It is also that lack of variation that has led to the boom in boutique, custom and modded guitars in the 21st Century.

Only time will really tell whether some of these maligned 1970s guitars will be re‑evaluated and achieve better recognition. Good examples will undoubtedly become increasingly sought after and collectable.

Recovery and Rejuvenation

Musical tastes continued to change and the 1980s and 1990s were no different. One trend was a move away from guitar music to highly produced electronic keyboard music. Japanese giant Roland (owner of BOSS effect pedals) tried to popularise the guitar synthesizers on the back of the electronica trend, as did consumer electronics company Casio who were more famous for calculators rather than guitars.

Another trend in musical taste was the explosion in popularity of glam, hard and ‘shred’ rock. Ironically, it was companies like Ibanez, once the scourge of copy guitars, which was ideally placed to cater for the trend with some cleverly designed genre‑appropriate instruments, such as their Destroyer, Iceman and Jem guitars.

Ibanez had cleverly repositioned themselves and continued to do so in order to sustain competitive advantage. In another canny move, Ibanez courted the new breed of virtuoso instrumental rock musicians, which proved successful. American guitarists such as Steve Vai and Joe Satriani were regularly seen using and advertising the Ibanez brand. Other Japanese companies followed suit, such as Yamaha and ESP/LTD. American brands such as Dean, Jackson and BC Rich also exploited the growing market for pointy rock alternatives to the old‑hat rock shapes such as Gibson’s Explorer and Flying V. Times had moved on and the traditional industry stalwarts were once again looking tired, on the back foot and at a strategic disadvantage.

By the time that some sort of equilibrium was restored from the late 1990s, the music and guitar landscape was very different from the end of the ‘golden era’. There was room for big music companies to grow, such as Peavey and Ernie Ball, the latter having bought out Leo Fender’s Music Man in 1984. The ‘big four’ brands were still there – Fender, Gibson, Rickenbacker and Gretsch, who continued to expand their ranges into high‑value custom shop as well as low‑priced models. In addition, once the barriers to entry were lowered, there were many small, opportunistic companies that sought to grow market share on their own terms, such as PRS. There was also a whole thriving boutique sub‑industry that focused heavily on producing custom instruments built to individual guitarists’ requirements; a healthy trend that continues to flourish well into the 21st Century.

The 2000s saw a reversal of fortunes with synth‑based dance and pop music becoming clichéd and well‑worn. This change of fortune facilitated a major resurgence in guitar music across a whole range of musical genres but specifically the burgeoning indie/alternative music scene. Indie music also triggered a renewed interest in retro‑styled instruments often evoking quirky designs from the past. This revitalisation enabled many gone but not forgotten guitars to experience a new lease of life. In addition, metal, progressive/contemporary, alt‑country and blues/rock genres have also seen rejuvenation and/or revivals, together with relevant instruments to suit. Even the likes of Fender, Gibson, Gretsch, Danelectro and Rickenbacker have benefitted through reissues of previously defunct models. All in all, many guitar‑based musical styles continue to flourish and guitar sales benefit from the 21st Century appetite for diversity.

Interestingly, in the 2000s and 2010s, with the renewed interest in both retro and vintage designs, many of the old American brand names that went out of business in the 1960s have since re‑emerged, including Supro, Valco, Airline, Harmony and Kay.

The global recession that started in 2008 has been the longest and deepest since the 1930s severely dampened demand for discretionary purchases such as musical instruments. However, the desire to own and play the world’s favourite instrument endures, despite regular proclamations of the ‘death of guitar music’.

Music Trades data shows that total guitar sales in America, either by number or value, have shown a general increasing trend per year since 2009:
Year    Number  Value
2009    1.65m     $924m
2010    1.74m     $922m
2011    1.94m     $921m
2012    2.34m     $903m
2013    2.34m     $821m
2014    2.50m     $839m
2015    2.49m     $935m
2016    2.47m     $1,001m
2017    2.63m     $1,070m

In comparison, the number of electric guitar sales in America has remained largely steady since the start of the recession. Where these figures will go in the future and whether sales will regain pre-crash levels anytime soon is a betting man’s game. The market is, judging by these indicators, likely to stay challenging for some time to come.

One very positive trend is that research by Fender in 2018 shows that 50% of new guitarists in the U.S. and the UK are females, suggesting that equality is finally making progress in the music industry.

Modern‑day guitarists have learned to become fickle and much more discerning. No longer could a few privileged brands expect musicians to be loyal or for their products to be accepted as the default ‘go‑to’ solution. While slower to adapt, the American ‘big four’ fought back and, although often constrained by their past, were forced to innovate and compete or die. Not all of those experiments have been successful but the point is that they are trying to adjust to the inevitability of the brave new world.

Looking at the bigger picture, the diverse structure of the guitar industry is healthy for both producers and consumers. While things will change again, the fragmented nature of the marketplace in the 2010s means that risks of major step change are reduced. For the long‑established brands, the asset value of the ‘classics’ is now cemented and, to some extent, can once again be relied upon in terms of quality and value. The reliance on industry standards also creates a problem for the likes of Fender, Gibson, Gretsch and Rickenbacker, as it inhibits what they can do in a way that consumers will accept, witness Gibson’s failed attempt to move into consumer and lifestyle electronics.

Ultimately, nothing is set in stone and there is very little that can be considered genuinely ‘new’. The only certainty is that change will be continuous and necessarily incremental. Digital music technology will continue to be both a threat to, and an opportunity for, manufacturers. The hybridisation of analogue instruments and digital technologies is still in its infancy and only time will tell, which companies will respond positively and which will fail to adapt and fall by the wayside (again).

That brings us pretty much up to the current day, at the time of writing (2018). As English punk rock pioneer Joe Strummer of The Clash once said, “The future is unwritten” and how true that is. We are nearing the end point of the guitar’s long story… except that the story will continue in perpetuity. All that is really left to do is to describe the current position (again at the time of writing) and to speculate, somewhat idly, about what that unwritten future may hold.

End of Part VII

Here we are at the end of yet another episode in the guitar’s extended tale. We are pretty much up‑to‑date and therefore almost at the end of the journey, with (I think) just one more article to go. I hope that you’ll join me, hopefully next month for the conclusion… as far as there can be one.

I am now beginning to deliberate about a companion series of articles for next year (2019). Before that happens, I need a rest from this massively resource intensive exercise. I can’t yet reveal what that new series is, as I am thinking about things I haven’t thought of yet (if you get my drift). I will have to consider how it might be done in a way that I haven’t seen elsewhere up to now – I need to bring something new to the subject matter, otherwise it is just regurgitating what others have already done. Watch this space… In the meantime, I have to start planning what I’m going to fixate upon for the remainder of this year.

Right now though, it’s time to stop writing about guitars and to start playing one of the darned things, so I’m off to plink my plank! Until next time…

CRAVE Guitars ‘Quote of the Month’: “Whatever was pre-modernism like?”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

August 2018 – A Potted History of the Guitar Part VI

Hello again, guitar history fans and welcome to August 2018’s article in the series on the history of the guitar. There is no point in beating about the bush, it’s time to dive right back in where we left off last month with the birth, and now – to extend the analogy – the growth of the electric guitar from early years to adolescent hood.

If you wish to recap on previous articles before starting here, the ‘Potted History of the Guitar’ series, can be accessed here (each part opens in a new browser tab):

The Modern Solid Body Electric Guitar

This part of the guitar’s story covers the period of fundamental and rapid innovation as well as pragmatic entrepreneurialism that starts around the late 1940s and early 1950s, a period of intense creativity that would come to define the modern electric guitar. Once the essential foundations were laid by Rickenbacker, Gibson and a few others, the popularity of the guitar was about to explode.

Since the time of the guitar ‘big bang’, instruments would continue to be improved and refined; an incremental process that continues unabated up to the current day. However, nothing like the level of creativity that heralded the ‘dawn’ of the electric guitar era. It was the start of a so‑called ‘golden era’ that would last about 15 years.

While acoustic guitars continued to develop after the 1930s, they were just about as loud as they were going to get without some form of amplification. Electric archtop and early solid body electric guitars had started the ball rolling during the first half of the 1930s and guitarists were buying into the increasing trend for electric guitars of one sort or another.

While not alone in influencing guitar development, today’s ‘big two’ companies – Fender and Gibson – have between them, been responsible for, or at last instrumental (sic!) in, many of the major innovations and landmark electric guitars since the 1950s. Therefore, the focus here is predominantly, but not exclusively, on the contribution from these two major manufacturers.  Much credit though is due to the vast number of other guitar builders – way too many to mention them all by name – that have played their part in developing the musical landscape over the decades, and which we enjoy today. Without their competition to keep the ‘big two’ on their toes, the quality and price equation might have gone too far in opposite directions. Thankfully, there is no monopoly in the guitar market – far from it in fact – and that fact, as it turns out, is a very good thing for musicians all over the world.

However, before the story moves on to Fender and then Gibson, we need to take a short diversion before getting back on track…

Bigsby Guitars

No history of the formation of the electric guitar would be complete without some mention of Paul Adelburt Bigsby (1899-1968). P.A. Bigsby was a motorcycle racer, inventor, designer and builder based in California. Bigsby has often been quoted as saying confidently, “I can build anything”.

Historically, Bigsby might be better known for his iconic Bigsby vibrato systems. Less well known is that Bigsby was also responsible for pioneering solid body electric guitars as well as for revolutionising pedal steel guitars.

Bigsby collaborated with lap steel guitarist Earl ‘Joaquin’ Murphey (1923-1999) of Spade Cooley’s orchestra in the 1940s. Murphey helped to persuade Bigsby to start making guitars in the first place, in around 1946/1947. Bigsby built Murphey several steel guitars by 1947, with two or three necks. Murphey’s successor in Cooley’s band, another steel guitarist called Speedy West (1924-2003), not wishing to be outdone, also commissioned Bigsby to build him a custom pedal steel guitar in 1948.

Around the same time, successful country and western artist and good friend, Merle Travis (1917-1983) asked Bigsby to fix a wayward vibrato on his Gibson L-10 guitar. Bigsby subsequently went on to build a complete solid body electric guitar for Travis, based on a sketch Travis had made. Travis’s Bigsby guitar attracted a lot of attention and other artists queued up for Bigsby to make further custom guitars, including for acclaimed session guitarist with the ‘Nashville A-Team’, Grady Martin (1921‑2001).

Bigsby’s guitar designs not only seem familiar, but also seem well ahead of their time for 1948, especially when compared to anything else on the market. The Bigsby Merle Travis guitar has a single cutaway body not dissimilar to Gibson’s Les Paul models and a neck/headstock outline that bears a notable resemblance to Fender’s Stratocaster. Bigsby’s design predated both the Les Paul (1952) and the Stratocaster (1954) by several years. Many have contended that Gibson and Fender plagiarised, rather than simply being influenced by, Bigsby’s original designs. Hindsight provides the opportunity to speculate but the truth is shrouded in idle debate and misinformation.

Partly because he wanted to make most of the parts himself, Bigsby only produced a very small number of finished custom‑built instruments up until 1956, where after he concentrated on the vibrato business. However, as his guitars never entered full production, his legacy consists of a few unique examples of his craftsmanship. Unfortunately, Bigsby kept no records of his creations. The company he founded undertook extensive research and can document 47 steel guitars and only 6 standard guitars, along with a few other custom instruments surviving to the current day. Others may yet come to light at some point to be authenticated.

Bigsby’s name is now synonymous with his ubiquitous vibrato tailpieces, which have adorned countless guitars since the 1950s. Bigsby sensibly filed a patent for his ‘tailpiece vibrato’ in November 1952, which was granted by the U.S. Patent Office in March 1953. The rest, as ‘they’ say, is history.

When his health started to fail, Bigsby sold his company to retired Gibson president Ted McCarty in 1966. Paul Bigsby died 2 years later in 1968 at the age of 68. Subsequently, Gretsch bought the Bigsby enterprise from McCarty in 1999. Bigsby Guitars is now making limited edition guitars under the patronage of Gretsch.

Many of those aware of Bigsby’s pioneering work feel that he should be given greater credit for his contribution to guitar history. One might only wonder at the course of modern guitar history had Bigsby capitalised on his creative designs. Bigsby may have been first in a lot of areas but it was other companies that catered for the market and it is the commercial success brought about by mass production which is where the story then continues.

Fender Solid Body Electric Guitars

Clarence Leonidas ‘Leo’ Fender (1909-1991) was an electrical engineer by trade. He started out in business as Fender Radio Service in 1938, repairing radios, phonographs and valve amplifiers. Recognising the growing demand for his skills from the music industry, Fender looked to use his growing expertise in that area. Along with business partner and former Rickenbacker employee Clayton ‘Doc’ Kauffman, Fender co‑founded the short‑lived K&F Manufacturing Corp in 1945. K&F’s intention was to manufacture musical instruments and amplifiers, including lap steel guitars that were particularly popular at the time.

By 1946, Fender had parted ways with Kauffman and established the Fender Electric Instrument Manufacturing Company, based in Fullerton, California. The company, known to most simply as Fender, has become one of the pre‑eminent and most widely recognised manufacturers of electric guitars, basses and amplifiers in the world. Historically, Fender is particularly important because of its ground breaking role in making electric instruments and amps accessible to mass markets eager for the new‑fangled technology in the 1950s.

Leo Fender’s vision had less to do with building small numbers of bespoke instruments and more to do with commercial large‑scale manufacture of instruments using tried and tested production methods. Fender wanted the electric guitar to be straightforward to manufacture as well as easy to service and maintain. Leo Fender asked George William Fullerton (1923-2009) to join the company in 1948. Fullerton’s appointment was important, as he would become a long‑term business associate not only at Fender but also in subsequent post‑Fender enterprises, including Music Man and G&L (an acronym standing for George & Leo).

Even though Fender had introduced amplifiers in 1947, Fender’s business began focusing on guitar designs and in c.1949 the company started making prototypes of what would eventually become the iconic Telecaster. The early prototypes used a body largely designed by George Fullerton. The first prototype exhibited a 3‑a‑side lap steel‑style headstock, while the second attempt looked more Fender‑like. Both prototype headstock designs bore a similarity to those seen on Bigsby’s guitars.

Fender offered the first mass-produced Spanish-style solid-body electric guitar to the public in 1950. The initial few guitars were single pickup models called the Esquire, although confusingly, a small number of Esquires were also ordered with two pickups.

The production dual pickup model was originally named the Broadcaster until Gretsch objected to the use of the name, as they had produced drums using the Broadkaster name since the 1920s. Fender complied and for a short period between February and August of 1951, the guitar appeared with no name on the headstock, leading to the popular nickname ‘Nocaster’ to describe its curious temporary anonymity.

Fender filed a patent for the Telecaster design in April 1951, which was awarded quite quickly by the U.S. Patent Office in August 1951. The familiar twin pickup single cutaway guitar, now formally named the Telecaster was made available to the public from mid‑1951 and has, remarkably, remained in continuous production ever since.

Although instantly recognisable nowadays, the Telecaster was unlike anything that had come before. The way they were put together was revolutionary; using a modular construction comprising a single cutaway slab body of solid ash wood and a removable maple neck secured by four screws on the back of the body. The simple and sturdy design proved not only resilient but also efficient and relatively cheap to manufacture using established assembly line techniques of the time.

While there have been many variants of the Telecaster over the years, including the Custom, Deluxe, Thinline and Elite, the original fundamental design elements have remained largely unchanged over many decades.

Not content with the success of the Telecaster, Fender and this team went on to design and market the enormously popular Stratocaster in 1954. Unlike the Telecaster, the Stratocaster employed a futuristic double cutaway ash body with deep rib and forearm contours for player comfort, 3 single coil pickups and a clever floating vibrato system. Fender retained the bolt‑on maple neck, albeit with a shapelier headstock than the Telecaster and eerily reminiscent of Bigsby’s earlier design. Fender filed a patent application for the Stratocaster’s ‘tremolo’ (a misnomer – it is actually a vibrato) design in August 1954, which was subsequently awarded in April 1956. The Stratocaster, like the Telecaster before it, became phenomenally successful with consumers and has been in continuous production since its launch.

Just as revolutionary for bass players, Fender also pioneered the commercially successful electric solid-body bass guitar. The Precision bass first appeared shortly after the Telecaster in 1952 and before the Stratocaster. Before the Precision, bass players had to contend with cumbersome acoustic, hollow body, fretless upright basses. The Precision was an ergonomic godsend, especially for travelling musicians. Like a guitar, the Precision featured a fretted neck making the instrument much more accessible to neophytes wanting to jump on the bandwagon of popular electric guitar music in the 1950s and 1960s. The 34”‑scale fretted neck gave practical credence to the new bass’s name – Precision. Fender filed a patent for the bass guitar in November 1952, which was awarded in March 1953.

Initially, the Precision took many design cues from the Telecaster before updates in 1954 and 1957 gave it the now‑familiar characteristics more akin to the Stratocaster. Not resting on their laurels, Fender followed up the hugely successful Precision with the twin‑pickup offset Jazz bass in 1960.

These four models – Telecaster, Stratocaster, Precision and Jazz – represented the enduring ‘core’ models around which Fender experimented with other designs. It is very unusual in industrial design history to ‘get it right’ first time and then for those products to remain relevant for over six decades (… so far, and counting). However, Fender seemed to have achieved just that. Fender, however, not content to stand still, kept innovating.

In the late 1950s and early 1960s, Fender also introduced two luxury contoured offset‑waist body models; the 25½”‑scale Jazzmaster in 1958 and the shorter 24”‑scale Jaguar in 1962. Both models used entirely new single coil pickups and both had separate, complex ‘rhythm’ and ‘lead’ circuits. The controls were not intuitive, which put off some players. The high‑price of the Jazzmaster and Jaguar may also have deterred customers and both models failed to attract the intended target audience – traditional jazz guitarists wedded to the competition’s archtop designs. However, both the Jazzmaster and Jaguar gained a significant boost from an unexpected source. Popular west coasts surf musicians including The Beach Boys and The Ventures adopted the new offsets and gave them some legitimacy. Ultimately though, poor sales led to Fender discontinuing the Jaguar in 1975 and the Jazzmaster in 1980. Wisely, Fender has subsequently successfully reissued both models for newer generations to discover.

One of the key success factors for Fender was the introduction of custom colour options in addition to the limited standard blonde and sunburst finishes. Custom colours were based on popular automobile paints made by DuPont during the American car craze of the 1950s. Customers could custom order new guitars from a range of exciting colour finishes for an additional 5% upcharge. Fender was also open to accepting standard colour guitars for factory refinishing in the custom colours. Popular names for the custom colours included Olympic White, Lake Placid Blue, Daphne Blue, Sonic Blue, Shoreline Gold, Burgundy Mist, Sherwood Green, Surf Green, Foam Green, Fiesta Red, Dakota Red, Candy Apple Red, and Shell Pink. Early models with genuine custom colours are relatively rare and have since become highly desirable with vintage guitar collectors; some guitars fetching a hefty premium on the vintage market compared to the standard colours. Many of those original custom colours phased out by 1969 to 1972 have now become very popular again as standard colours in the 21st Century.

Strategically, Fender tried to cover all bases by also introducing a range of short-scale (initially 22½” and then 24”) ‘student’ models including the Musicmaster (1956), Duo‑Sonic (1964), Mustang (1964) and Bronco (1967). To differentiate the ‘student’ instruments from the pro‑level models, Fender designed hardware and finishes that was unique to these models. The Musicmaster and Bronco had single pickups, while the Duo‑Sonic and Mustang had two pickups. The Mustang and Bronco also featured bespoke vibrato systems while the Musicmaster and Duo‑Sonic had fixed bridges. While these budget models have found a strong following by those in the know, they have had chequered histories, all having been discontinued and reissued over the years. Seen as peripheral to the ‘core’ classics, the high volume low cost guitars undeservedly attract a lower profile and lower resale values on the vintage collector market despite being made at the same factory, by the same staff, using the same materials and tools.

In the minds of most guitarists, Fender was a solid‑body guitar maker. After the failure of the Jazzmaster and Jaguar to persuade traditionalists to change brand, Fender attempted to compete with Gibson’s popular ES range of semi‑acoustic guitars. Fender introduced the fully hollow‑body Coronado in 1966, designed by German luthier and Rickenbacker guitar designer Roger Rossmeisl. The Coronado retained Fender’s ‘bolt‑on’ maple necks with six‑a‑side headstocks, although the pickups used were unusually DeArmond single coil models. Unfortunately for Fender, the ill‑fated Coronado proved a commercial failure and was discontinued in 1972. After a short‑lived venture into archtop jazz guitars with the rare Montego and LTD models between 1968 and 1972, Fender tried again in1976 with the introduction of the upmarket semi‑hollow humbucker‑equipped Starcaster. Like the valiant attempts before it, the Starcaster met with the same consumer resistance and proved equally unsuccessful, resulting in it being summarily discontinued in 1982. Notably, both the Coronado and Starcaster models were reissued by Fender in 2013 and continue in production today.

There have been many other Fender solid body electric guitars over the years including the Bass V & VI, the Electric XII, Bullet and Lead amongst numerous others.  In addition, there were many variations on a theme, for instance the Coronado came in Antigua, Wildwood, XII and bass versions. Similarly, the Musicmaster and Mustang also had short‑scale bass models. Other examples include parts‑bin oddities like the Swinger and Maverick. Many later experiments were undertaken by the Japanese arm of Fender without any risk to the company’s ‘Made in USA’ standing. Japanese‑only models include the Performer, Katana and the Gibson‑like set neck Flame. Many of these low volume under‑the‑radar guitar models are often described as ‘forgotten Fenders’.

As covered in Part IV of the story, Fender has also sustained a very successful line of guitar and bass amplifiers dating from the late 1940s right through to the current day, including landmark valve amps such as the Princeton, Champ, Bassman and the mighty Twin Reverb (among many others). Like Marshall and Vox from the UK, Fender amps have become synonymous with modern electric guitar music.

The successful honeymoon period for Fender was, however, not destined to last forever. In early 1965, Leo Fender sold his company to the Columbia Broadcasting System (CBS), reportedly for $13m. Despite investment and efforts to diversify the product lines, manufacturing quality varied considerably due to poor management and cost cutting, particularly during the 1970s. Industry reputation and credibility waned and Fender sales suffered significantly, especially in the face of aggressive competition from Japan. One of the strategies adopted by Japanese companies at the time was, despite the existence of U.S. patents, to flagrantly copy American guitar designs. Japanese companies produced large numbers of guitars built to high standards and sold at low prices. This shameless targeting of American products placed an already struggling Fender under considerable pressure. By 1981, Fender had brought in Dan Smith from Yamaha as Marketing Director to oversee selective guitar redesigns and, along with Fender luthier (and founder of the Fender Custom Shop) John Page, to breathe new life into Fender’s fortunes.

After making considerable improvements across the business, 20 years after being sold to CBS, a management buyout was initiated by CEO William Schultz (1926‑2006). In retrospect, Schultz is now widely regarded as ‘the man who saved Fender’. Fender Electric Instrument Manufacturing Company was acquired from CBS by its own employees in 1985 and the newly privatised company was renamed Fender Musical Instruments Corporation (FMIC). The sale did not, however, include the existing Fullerton factory, so Fender was forced to construct a new plant at Corona, California which started limited manufacturing in late 1985.

After two years of restructuring the business, the post‑CBS Fender American Standard Stratocaster was introduced in 1987. While superficially similar to previous models, the American Standard was a significant model that signified the company’s return to form and commercial prosperity. In the same year (1987), Fender set up their in‑house Custom Shop (nicknamed ‘The Dream Factory’), based at their Corona facility in California. The aim of the Custom Shop was to showcase just what Fender’s master luthiers were capable of building.

Fender’s headquarters are now based in Scottsdale, Arizona, with North American manufacturing facilities in Corona, California, and Ensenada in Mexico. Off-shore production of budget Squier guitars and basses is based in Korea and Japan. Fender has continued to innovate, introducing ‘custom shop’, ‘vintage reissue’ and ‘relic’ instruments and a range of electronics to a market hungry to recapture the ‘golden years’ of pre‑CBS Fender instruments and amps.

We have become so familiar with the Fender Telecaster, Stratocaster and Precision, that we sometimes forget just how revolutionary these designs actually were back in the 1950s and what they, perhaps unwittingly, came to represent. Looking a little more broadly helps to put things into context. Loud and brash electric guitars undoubtedly helped to define the musical uprising brought about by the advent of rock ‘n’ roll. At the same time, a western social and cultural transformation was taking place in the wake of post‑WWII austerity and despite prevailing conservative Cold War political paranoia. Affluent and often puritanical middle class values allied to consumers’ relentless drive to satisfy materialistic aspiration were fuelled by media, film and television. Opposing the status quo was a growing urban resentment, an angry youthful rebellion boosted by emerging anti‑conformist liberalism and radical demands for greater personal freedoms. Fundamental change was, arguably, inevitable. The turmoil created in the 1950s began to reshape the fabric of society in both the U.S. and the UK and this, in turn, propelled musical experimentation and creativity at a pace never seen before. Fender’s electric guitars not only enabled that particular wave to be ridden with verve, passion and a certain degree of teenage angst, but also came to symbolise many defining events for a frustrated generation, a subversive movement that would last well into the 1960s. When Marlon Brando was asked the question in the film ‘The Wild One’ (1953), “Hey Johnny, what are you rebelling against?” he retorted disinterestedly “whadda you got?” For a while at least, it was hip to be cool and cool to be hip.

If there are any guitars that qualify for the terms ‘iconic’, ‘classic’ and ‘industry standard’, these original Fender models have to be up there with the best and most enduring industrial design wonders of all time. In particular, the timeless design of the ‘Tele’ and the ‘Strat’ have persisted in the minds of guitarists over many decades, and will surely continue to do so for the foreseeable future.

Those ‘new’ guitars back in the 1950s are now hugely valuable vintage instruments and are part of our collective music heritage. Vintage Fender guitars, basses and amplifiers are much sought after by collectors, musicians, dealers and enthusiasts alike, with many key models originally made prior to the CBS takeover in 1965 now reaching high vintage guitar market values. Authentic vintage instruments associated with successful artists (and with documented provenance) attract an even higher price premium on the collectable market, for instance, Eric Clapton’s famous c.1956 ‘Blackie’, which was sold for $959,500 to Guitar Center at Christie’s in New York in 2005.

Gibson Solid Body Electric Guitars

The history of Gibson guitars is much longer than that of its main current‑day rival Fender and much of this has already been covered elsewhere. The crucial part that Gibson played in this stage of guitar evolution is picked up again here in the mid‑20th Century.

During the 1940s, popular American jazz guitarist, performer and musical inventor Les Paul (1915-2009) – born Lester William Polsfuss – had become increasingly unhappy with the compromises experienced by electric acoustic archtop guitars. In an attempt to overcome the shortcomings, Les Paul had been actively experimenting with guitar design from around 1939. A famous early prototype electric guitar assembled by Les Paul out of hours at the Epiphone factory around 1940 was nicknamed ‘the log’, which was essentially a solid piece of 4”x4” pine timber running the length of the body, providing the base for the strings, bridge assembly and pickups. To make the design appear more guitar‑like, Les Paul attached a traditional guitar neck and two hollow guitar ‘wings’ from an Epiphone archtop on either side of the ‘plank’.

Les Paul had originally approached Gibson as early as 1941 but no interest was shown by the company.  He tried again in 1945 or 1946 and his ideas were once again rejected. It wasn’t until 1950 that newly‑appointed Gibson president, Theodore ‘Ted’ McCarty (1909-2001) brought in Les Paul to act as a consultant in response to Fender’s newly launched solid body electric guitars. Like Leo Fender, McCarty could not play the guitar, so he worked very closely with those who could.

In 1951, Gibson began producing prototypes of a solid body electric guitar designed by McCarty in consultation with Les Paul. One of the many prototype designs (shown following restoration below) is relatively close to the final production in all but detail.

Gibson was already losing ground, and business, following the introduction of Fender solid body guitars that appealed to young musicians exploring new musical ideas. To many consumers, Gibson’s models were seen as staid and, compared to the modernistic Stratocaster, frankly old fashioned, tired and boring. For Gibson, it was important that any sold body electric guitar design would be all‑new while also remaining consistent with the values, quality and reputation of the company. It was also crucial that the new instrument would be quite different from Gibson’s competition, whether existing or emerging. Crucially, before the new guitar was launched, McCarty agreed a deal with Les Paul for it to carry Les Paul’s name on the headstock and for him to be an integral part of Gibson’s advertising campaign.

In July 1952, Gibson launched the now-iconic solid-bodied guitar, the Gibson Les Paul Model, finished in metallic gold, equipped with dual P90 pickups and a trapeze tailpiece similar to those found on the company’s archtop guitars. For a number of years, the Les Paul Model and its variants were the only solid body guitars made by Gibson. The range was extended from the basic ‘gold top’ to the upmarket black and gold Les Paul Custom in 1953 featuring a standard bridge, one P90 pickup and a unique Alnico V ‘staple’ pickup at the neck, a unique design intended to appeal to jazz guitarists.

To broaden appeal, Gibson introduced two affordable slab‑body single cutaway Les Paul models, the Junior with a single P90 pickup in 1954 and Special with dual‑P90 pickups in 1955. These rather utilitarian models retained the body outline but with few of the upmarket features of the carved‑top Les Pauls.

By 1957, the Les Paul’s P90 single coil pickups began to be replaced with Gibson’s PAF (Patent Applied For) humbucking pickup. The process started with the now‑iconic 3‑pickup Les Paul Custom ‘Black Beauty’.

1958 saw the Junior and Special updated to a new double cutaway body and the option of cherry or outrageous TV Yellow, a colour allegedly designed to show up well on black & white TV screens of the time.

Following poor sales of the original Les Paul ‘gold top’ model, the guitar was rejuvenated in 1958 by renaming it the Standard. The Standard’s specification was changed substantially – a cherry sunburst finish was applied to a maple‑capped mahogany body, the PAF pickups became the norm and a tune‑o‑matic bridge and ‘stop’ tailpiece were standardised. Some, but not all, of the tops exhibited an attractive matched 2‑piece ‘flame’ maple top. Around 1,700 of the now‑legendary ‘Burst’ Les Paul Standards were produced between 1958 and 1960 and all have become highly collectable on the vintage guitar market. The original sunburst Standards have become the aspiration of many guitar enthusiasts. These rare instruments are widely regarded as representing the epitome of Gibson guitar’s ‘golden age’.

The Les Paul models weren’t the only new instruments aiming to establish Gibson’s electric guitar credentials. The late 1950s saw a number of new guitar designs including the McCarty‑designed ES-335 semi‑acoustic, which first appeared in 1958. The ES‑335 was significant because of a solid centre block running through the body and on which the pickups and bridge were mounted, essentially much like Les Paul’s ‘log’ experiment. The semi‑hollow body construction was important in reducing acoustic feedback in high gain situations compared to fully‑hollow archtops. Gibson also released a lower cost hollow‑body ES model with dual P90s, called the ES-330 and two upmarket siblings, the ES‑345 and ES‑355.

The late 1950s was a period of intense innovation at Gibson. In addition to the Les Paul and the ES series, Gibson designed two ‘modernistic’ guitars intended to compete with Fender’s popular solid guitars, the Explorer and Flying V, both of which were introduced in 1958. A third ‘modernistic’ series model, the Moderne, was patented and prototypes might have been constructed but no actual verified examples have ever come to light, let alone reached the vintage collector market. The Moderne has become something of a myth and an original 1950s example is seen by many collectors as the ‘Holy Grail of guitar collecting’. Gibson (re‑)issued a Moderne in small numbers in the early 1980s and again occasionally since.

While the futuristic Flying V and Explorer models were well ahead their time, sales of these radical instruments was very poor. In 1958, Gibson sold only 81 Flying Vs and 19 Explorers. The following year (1959), only 17 Flying Vs and 3 Explorers were sold. It is hardly surprising then that both models were withdrawn by 1959-1960. A few further examples were constructed in the early 1960s from parts. As only small numbers of the original release Explorers and Flying Vs were made, they have become very highly sought after and valued. Gibson, however, would return to these original designs and has successfully reissued both the Flying V and Explorer many years later.

Like Fender, Gibson recognised that they had to cater for the lower end of the market in order to attract new and younger players to the fold. In order to make budget guitars accessible without affecting sales of their premium models, Gibson introduced a range of simple low cost ‘student’ guitars, called the Melody Maker, from 1959. The basic Melody Makers, featuring distinctive narrow headstocks, slab bodies and all‑new Fender‑like narrow single coil pickups, were produced in large numbers at Gibson’s Kalamazoo plant alongside the classics. The Melody Maker’s body shape went through four incarnations during its lifetime, with only 2 bearing a similarity to existing Gibson electrics. Although the Melody Makers proved very popular and sold in large numbers, they were nevertheless withdrawn by 1971. Gibson has re‑used the Melody Maker name on a number of occasions since the original models.

Despite the now‑legendary reputation of the Les Paul Standard, sales of the model remained relatively stagnant and, in 1961, Gibson were forced to take action. Effectively, production of the Les Paul ceased and a new design was introduced in 1961, even though it retained the ‘Les Paul’ moniker.  The new model was another design shift with a thin double cutaway mahogany body with contoured upper bouts and pointed ‘devil’ horns. Allegedly, Les Paul didn’t favour the guitar’s design and no longer wanted to be associated with it. In addition, Les Paul separated from his wife Mary Ford and the divorce settlement may also have been a pecuniary factor in his decision to drop his name from the guitar. By 1963, after Les Paul’s name was removed, the model was re‑designated the Gibson SG (standing for ‘Solid Guitar’). The Gibson SG has remained in continuous production since 1961 and, ironically, it has become the company’s most commercially successful model in Gibson’s long history. Like the single cutaway Les Paul before it, the SG model came in a number of variants, the single‑P90 Junior, the dual‑P90 Special, dual‑humbucker Standard and 3‑humbucker Custom.

The single cutaway Gibson Les Paul may have gone but it was not forgotten. It reappeared in 1968, and then only after second hand guitars became popular at around the time of the British blues explosion, led by guitarists such as Eric Clapton and Peter Green, as well as other contemporary musicians of the time, including Jeff Beck, Jimmy Page and Paul Kossoff. The Les Paul has had numerous variants over the years including notable models such as the Les Paul Deluxe, Professional, Recording, Artisan and Studio models, and many guitarists have had signature models released to celebrate the artists’ association with the company.  Since its reintroduction in the late 1960s, the Les Paul has remained in continuous production and, along with the Fender Stratocaster, it has become one of the most recognisable design icons of modern‑day guitar music.

Gibson continued to innovate into the early 1960s, introducing more convention‑busting designs. McCarty, hired famed car designer Ray Dietrich (1894‑1980) to cash in on the American automotive craze of the time. The new model was called the Firebird, which featured a more rounded‑off Explorer‑like outline, through‑body construction and rear‑facing banjo tuners. These first Firebirds, produced in 1963‑1964, were known informally as ‘reverse’ bodied because the upper treble bout was more pronounced than the bass bout. Again, due to poor sales and high manufacturing costs, Gibson simplified the fundamentals and ‘flipped’ the body to produce the ‘non‑reverse’ Firebird, made between 1965 and 1969, when it was withdrawn. As with many of other unsuccessful early Gibson solid body designs, the company has reissued the Firebird in both ‘reverse’ and ‘non‑reverse’ formats since. Other variants were made including the 12‑string Firebird XII and the Thunderbird bass.

McCarty stood down from Gibson in 1966 and became president of Bigsby Guitars. McCarty later collaborated with, influenced and mentored up‑and‑coming ambitious American luthier Paul Reed Smith of PRS Guitars. Smith honoured McCarty’s contribution to guitar building by dedicating him with a PRS McCarty model. McCarty died in 2001 at the age of 91.

As with competitors, Fender, Gretsch and Rickenbacker, the 1970s was a period of controversial experimentation while under ‘corporate’ ownership. Gibson produced many other solid body electric guitars than have been mentioned so far. Among the many ‘forgotten Gibsons’ of the period, there are some notable examples, including the Challenger, Corvus, Firebrand, Invader, L6-S, Marauder, RD series, S‑1, Sonex‑180 and the Victory.

While Gibson may have had considerable success with guitars, it has never quite found the same formula for basses, amps and acoustics as some of its competitors, including Fender. That doesn’t mean to say they haven’t made notable examples; they have, it’s just that they haven’t had the popular impact and longevity to warrant mainstream success alongside the recognised ‘classics’.

After McCarty’s departure, Gibson came under increasing commercial pressure. Things came to a head in 1969, when Gibson’s parent company, Chicago Musical Instruments Ltd (CMI) was taken over by a South American brewing company called ECL and then became a subsidiary of Norlin Musical Instruments in 1974. In the same year, Norlin shifted production of Gibson guitars from its long‑term home in Kalamazoo, Michigan to Nashville, Tennessee. In 1984, Gibson finally closed its old factory at Kalamazoo.

Following a similar pattern to Fender’s travails at the time, Gibson underwent a period of poor quality control and severe financial difficulties, often blamed on corporate interference by executives who knew little about, and cared little for, the company’s pedigree and its customer base. Ultimately, as happened with Fender, the company returned to private ownership in January 1986 to focus on its core business. The Gibson Guitar Corporation was close to liquidation when it was bought by three businessmen, Henry E. Juszkiewicz, David H. Berryman and Gary A. Zebrowski. Under the new management, the business was once again repositioned as a maker of high quality professional musical instruments.

While production of Gibson’s sold body guitars remained in Nashville, further production plants were also opened in Memphis, Tennessee (1984) for semi‑hollow models, as well as Bozeman, Montana (1989) for acoustic guitars. After having bought out its main American competitor Epiphone in 1957, Gibson strategically repositioned Epiphone as a budget brand and relocated production of Epiphone guitars to Japan in 1970 and then to Korea in 1983, mainly producing low‑cost versions of famous Gibson models.

In order to cater for the more exclusive end of the market, Gibson produced select instruments under an in‑house Custom Shop operation. Juszkiewicz built on the internal Custom Shop operations, the roots of which date back to around 1984 (3 years before Fender established its Custom Shop), and which became a separate facility based in Nashville from October 1993.

The Gibson Guitar Corporation, still a private company, has its headquarters based in Nashville, Tennessee and continues to develop and produce high quality instruments into the 21st century. However, it hasn’t all been plain sailing for Gibson. In May 2018, after a period of unsuccessful diversification into peripheral consumer electronics products and rapidly rising debts, Gibson entered Chapter 11 bankruptcy protection in the U.S. The widely anticipated move was intended to give the company sufficient time to restructure the business, with Henry Juszkiewicz still as CEO. Gibson intends to focus on profitable core musical instrument products, while divesting itself of the remainder of its ill‑fated and loss‑making lifestyle ventures. It is likely that Gibson’s rationalisation programme will succeed and the company will avoid liquidation. Like the phoenix symbolised on its Firebird guitars, Gibson will surely rise again from the ashes and achieve long‑term financial security.

Many vintage Gibson solid body electric guitars are highly regarded by collectors, musicians and enthusiasts alike, with many key models reaching high or very prices on the vintage guitar market with the 1959 sunburst Gibson Les Paul Standard is held in particularly high esteem. It will be interesting to see if a resurgent Gibson will be able to recapture the pinnacles of past glory. Watch this space…

Other Major American Electric Guitar Brands

While it might seem from the previous two sections that Fender and Gibson were the only companies responsible for all the key milestones in the solid guitar’s evolution, this is in fact far from reality. There have been innumerable manufacturers from around the globe that have been highly influential in shaping the market.

Epiphone – Epiphone’s illustrious history dates back to 1873 when the Stathopoulo family emigrated from Greece, via Turkey, and arrived in New York in 1903. The family set up a business in America making banjos and mandolins. By the end of WWI, the company became ‘The House Of Stathopoulo’, then changed its name to the ‘Epiphone Banjo Company’ in 1928, the same year that they started producing acoustic guitars. The name Epiphone derived from a combination of owner Epaminondas Stathopoulo’s nickname, ‘Epi’, and the Greek word ‘phon-’ meaning ‘sound’ or ‘voice’. In addition to musical instruments, Epiphone started producing amplifiers in 1935. Epiphone was Gibson’s main competitor in the production of high‑quality instruments, particularly archtop guitars in the 1930s and 1940s, such as the De Luxe, Broadway and Triumph models. It was only after World War II that Epiphone began to struggle, eventually resulting in its acquisition by Gibson in 1957. Initially, the new generation of Epiphone guitars were still made in Gibson’s American facilities, even though many of their instruments were re‑branded Gibson models. During the 1960s, Epiphone’s Casino, which was effectively their version of the Gibson ES-330, became particularly famous because of an association with English pop/rock band The Beatles. In recent decades, the Epiphone brand has come to represent the affordable end of Gibson’s output, complementing the parent company’s product lines. In the early 1970s manufacturing was migrated to the Far East, first in Japan, then Korea and, since 2004, Epiphone guitars have been made in a dedicated factory in Qingdao, China. Other well‑known model Epiphone names from their past include Emperor, Riviera, Sheraton, Olympic, Wilshire and Crestwood.

Gretsch – Another famous manufacturer with a long history dating back to 1883 is Gretsch. The company was founded by Friedrich Gretsch (c.1856-1895). Gretsch arrived as a 17 year old German immigrant to the United States in 1872. By 1883, aged 27, Gretsch was manufacturing banjos, tambourines, and drums from a modest shop in Brooklyn, New York. It wasn’t until the big band era of the 1930s that guitars became part of Gretsch’s core business with models like the Synchromatic and Electromatic. Gretsch became hugely successful with the explosion of blues, country and rock ‘n’ roll music in the 1950s. The man behind many of Gretsch’s iconic designs including the flamboyant White Falcon was guitarist Jimmie Webster (1908‑1979), who worked as sales and demonstration representative for Gretsch. NB. Webster was known as the inventor of the ‘Touch System’ of playing in the 1950s, popularised by Van Halen as ‘two‑hand tapping’ in the late 1970s. The demand for Gretsch guitars during this period enabled Gretsch to compete head on with Gibson and Fender. Gretsch’s association with guitarist Chet Atkins propelled their now‑iconic 6120 from 1955 to massive popularity. Like many other companies in the 1960s, Gretsch struggled and was bought out by Baldwin Pianos in 1967. By 1981, after a period of significant decline Baldwin finally wound up production of Gretsch instruments. Fred W. Gretsch purchased the brand name in 1985 and several attempts were made to restart production, including manufacturing in the Far East. Gretsch has been under Fender patronage since 2002 with Fender having the controlling interest and the Gretsch family retaining ownership. A rejuvenated Gretsch company, with Fender’s support and endorsement from rockabilly guitarist Brian Setzer has, once again, become successful. Well‑known model Gretsch names from their history include the White Falcon, Country Gentleman, Tennessean, Viking, Anniversary, Jet and Corvette, often carrying obscure and confusing numerical model numbers.

Rickenbacker – Rickenbacker’s history is shorter than some of its competitors and has been widely covered in other parts of the guitar’s story. Rickenbacker only emerged in the early 1930s first as Ro‑Pat‑In then as Electro before formally adopting the Rickenbacker name. Rickenbacker was crucial in the early development of the electric guitar. However, it wasn’t until the late 1950s that Rickenbacker’s fortunes found a new lease of life and took a major upturn that would lead to the current day. In 1953, Adolph Rickenbacker sold his company to music industry businessman F.C. Hall (1909‑1999), founder and CEO of media company Radio-Tel. Under Hall’s ambitious leadership, the company introduced a number of innovative guitar models, which proved popular with many bands during the nascent rock ‘n’ roll era. In an inspired move, Halll hired illustrious guitar maker Roger Rossmeisl (1927-1979) in 1954. Rossmeisl was responsible for the design of Rickenbacker guitars including a number of iconic instruments released in the late 1950s, including the ‘Capri’ 300 series guitars from 1958 and the equally influential 4000 series basses from 1957. Both of these designs, along with a number of others, are still in production today. Rickenbacker’s artist association with, particularly, The Beatles and The Byrds in the 1960s, cemented the brand’s rightful place in guitar history.

Danelectro – While it may not be an obvious choice for coverage, it is worth mentioning Danelectro. The company was founded in 1947 by Lithuanian immigrant Nathan ‘Nat’ Daniel (1912-1994) and based in New Jersey. The company started out by making guitars, basses and baritones for other companies including Silvertone models for the Sears & Roebuck department stores and mail order, and Airline models for Montgomery Ward. The strategy enabled Danelectro to start making guitars using its own name by 1954. Daniel innovated by using unorthodox materials and construction techniques, at least hitherto unusual in the guitar building industry. The resulting instruments have a distinctive look and sound that also enabled the company to produce no-frills instruments at competitive prices for the mass market. In a clever move under the Silvertone brand, they produced guitars with a valve amp built into the guitar case, so customers could buy everything they needed in one convenient, portable package. The brand is important historically because it enabled many young aspiring musicians to buy instruments at low cost. The unique approach also attracted many professional players to use Danelectro instruments, including guitarists like Jimi Hendrix, Rory Gallagher, Jimmy Page and Beck. Like many other American companies, including Fender and Gibson, Danelectro struggled in the 1960s and was sold to industry giant MCA in 1966, only for the factory to be closed down in 1969. The brand was resurrected and started making guitars again in 2006.

PRS – Compared to some of the well established brands that have been around much longer, PRS Guitars is really the new‑kid‑on‑the‑block, founded by American luthier Paul Reed Smith in Annapolis, Maryland in 1984. In a relatively short period of time, PRS has gained an enviable reputation for high quality instruments and amps, cleverly finding a niche in the market that is different from their competitors. Taking design influences from Fender and Gibson amongst others and adding something new and fresh of their own, PRS managed to build substantial market share rapidly from seemingly nowhere.  Having guitarist Carlos Santana on board from the start and bringing in ex‑Gibson president Ted McCarty as Smith’s mentor didn’t harm the company’s credibility either. PRS introduced stunning instruments, starting with the Standard and Custom, recognised for their immaculate craftsmanship. Many PRS instruments have distinctive features including exquisite highly figured tone woods, superbly engineered hardware and distinctive unique ‘bird’ fingerboard inlays. The company grew swiftly; relocating to a major new American factory in 1996 and from 2003 PRS established a range of more affordable SE (standing for ‘Student Edition’) models manufactured in Korea. PRS’s success demonstrates that the industry’s barriers to entry are not insurmountable and with the right strategy, it is still possible to enter the market and to grow market share despite well‑established competition, and without being straightjacketed by historical constraints.

Other Guitar Brands From Around the World

Guitar design, production and sales are not restricted to just a few large American companies. In America alone, there are many thousands of guitar manufacturers past and present. Many names will be familiar, such as Ernie Ball/Music Man, Peavey, Guild, Jackson, Dean, BC Rich, Ovation, Supro, National, Kay, Harmony, etc., through to innumerable custom and boutique luthiers. Some of these manufacture instruments in the U.S. while others are American companies that source part or all of their guitars from the Far East. A quick look around the globe highlights many other fertile guitar making territories…

Europe – Particularly following World War II when embargoes and tight trade restrictions limited exports of guitars from America, a combination of high demand for guitars and low supply provided an opportunity for some enterprising European companies to fill the gap. Many of these guitars followed the influence of American designs in the knowledge that young people in Europe aspired to emulate their American counterparts. Britain and continental Europe have produced many guitar brands over a long period of time including from illustrious companies such as Burns, Duesenberg, Eko, Framus, Hagstrom, Höfner, Hohner, Patrick James Eggle, Shergold, Gordon Smith, James Trussart, Vigier, Vox, Warwick, Watkins, Zemaitis, etc.

Far East – The Far East isn’t only responsible for producing low cost guitars for American and European guitar brands. During the 1970s, Japanese firms were producing affordable, high quality copies of American guitars, taking advantage of high labour prices and poor quality control in the U.S. However, there has also been a notable history of guitar manufacture in its own right, including some very quirky and idiosyncratic models. Many of the big names from Japan include, Aria, ESP/LTD, Ibanez, Italia, Teisco Tokai, Yamaha, etc.

Eastern Bloc – While not widely recognised as a guitar‑making region, largely because of its nationalistic political regime and economic protectionism, the Eastern Bloc countries have produced a diverse range of instruments over an extended period of time. There is a vast array of models bearing many unfamiliar names such as, Aelita, Formanta, Jolana, Migma, Tokina, etc.

As you might expect, the fascination with the world’s favourite instrument is genuinely global and they have been made in every corner of the world, including Australia, Canada, South America and, to a lesser extent, the middle east (where the guitar’s story began after all!) and Africa.

Other Factors

Although this section focuses on electric guitar production, it is worth remembering that acoustic guitar manufacturing is also thriving in the 21st Century with famous specialist brands such as Martin (based in Pennsylvania since 1833) and Taylor (based in California since 1974) at the forefront of innovation and technological development. Of the major American electric guitar makers, it is only really Gibson that also has a reputable range of professional acoustic instruments. Elsewhere, Yamaha has a strong range of Far Eastern acoustic guitars. There are numerous other manufacturers to be found producing fine acoustic guitars at all price points in the market.

The 21st Century landscape of guitar production is one of global diversity and differentiation. Modern guitars may have been hugely influenced, if not defined, by a small number of American companies but it is by no means a monopolistic industry; quite the opposite in reality. The long‑term viability of guitar making is inextricably linked to the music industry and what happens will rely heavily on musical trends and influences.

There have been many challenges to the dominance of the electric guitar, notably during the 1980s and 1990s with proliferation of synthesizers and in the 2000s as home production of electronic music became affordable and accessible. However, the popularity of the guitar seems (relatively) assured, despite many cynical commentators regularly proclaiming ‘the death of guitar music’. Digital technology is bringing a new challenge to guitar makers, so it will be up to countless luthiers around the world to rise to the challenge, seek new opportunities, adapt the guitar and make it truly a universal instrument and secure its future success for generations to come.

End of Part VI

Over these last six instalments, I have covered the guitar’s history from its vestigial beginnings in the ‘Cradle of Civilisation’ to the birth and proliferation of the electric guitar. There is just a little of the long and winding path left to travel and I hope you’ll join me for the remainder of the story. The next article has yet to be written, due to personal circumstances. While I hope to publish it next month, it is by no means certain. Fingers crossed. Until next time…

CRAVE Guitars ‘Quote of the Month’: “Contrary to popular opinion, great minds most definitely do not think alike. Similarly, great musicians do not play or sound alike.”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

June 2018 – A Potted History of the Guitar Part IV

Without further ado, let’s get stuck into Part IV of the history of the guitar. As the story was left at the end of the last article during the 1920s and early 1930s, something new was needed to ensure that guitars would not only be able to compete with other instruments in a live situation but also become the catalyst for a musical revolution to mirror what was taking place in wider society. Just in case you were lulled into a sense of coherent continuity, this month’s article is a bit different from what has been covered so far.

This part is presented as part of a whole. If you wish to recap on previous articles in the ‘Potted History of the Guitar’ series, you can access them here (each part opens in a new browser tab):

Please remember that this is written purely for entertainment purposes and is not intended as an academic tome. While I have tried to be diligent in my research, there are undoubtedly improvements that could be made, so corrections and clarifications are genuinely welcomed. This is quite a long article, so I hope you are sitting comfortably.

Needing to be heard

The problem for guitarists in the 1920s was a simple but fundamental and frustrating one. The amount of volume that could be attained from purely acoustic guitar designs had got as far as it was likely to get at the start of the 1930s. Guitarists were still struggling to be heard in noisy live music environments as part of jazz, swing, big band and dance orchestras. Despite the strengths of steel strung folk guitars, archtop guitars and resonator guitars, the lack of volume continued to be a problem for guitarists throughout the early part of the 20th Century. A number of clever innovations attempted to help acoustic guitarists cut through the mix but they didn’t really capture mainstream attention and passed into obscurity, leaving demanding musicians still yearning for louder instruments.

Creative inventors, engineers and entrepreneurs were determined to find a workable solution. Perhaps the biggest game‑changing watershed in the entire history of guitar building was about to take place in America in the 1930s. The transformation depended on coincidental and mutually dependent developments; the magnetic pickup, the portable valve amplifier and its associated loudspeaker(s). Undoubtedly, the amplifier came first, simply because it could be driven by other inputs, such as early microphones, while the pickup followed to take advantage of the opportunity. Logic suggests that the converse would make little sense, as a pickup without some means of manipulating the signal s essentially redundant.

By the end of the 19th Century, early microphones were being used in telephone, broadcasting and recording industries. In 1916, the first condenser microphone was invented and in 1923, the first moving coil and ribbon microphones were developed. Given the timing, it seemed logical to experiment with microphones to capture the sound from acoustic guitars. However, the results weren’t particularly successful and the microphone proved to be a dead end for guitarists at the time. A more practical and reliable alternative was required to capture the physical energy produced by a stringed instrument and convert it into a usable electrical signal that could then be amplified and output.

Before starting to look at the early electric instruments that changed modern guitar music forever, it is worth taking a temporary detour to look at the catalysts that led to the step change. Once the technical inhibitors had been overcome and the various elements combined, electric guitars became a realistic and achievable proposition.

The electro magnetic guitar pickup

By the 1920s and 1930s, the science of using magnetism and wire coils to induce an electric current had been understood for several decades. It would, however, take some ingenuity to apply the various scientific principles involved to overcome the specific practical problems experienced by guitarists of the time. Within this context, we need to go right back to basics as a starting point.

An electromagnetic guitar pickup is basically a passive transducer that uses Faraday’s law of induction, named after English scientist Michael Faraday (1791‑1867), to produce an electromagnetic force. The physical movement of the vibrating steel string of a strummed or plucked guitar disturbs the magnetic field and induces a small voltage of between 100mV and 1V through the coil. This differs from a simple microphone, which works by converting pressure variations in the air (sound waves), into the mechanical motion of a diaphragm, which in turn produces an electrical signal (depending on the type of technology used).

A simple electromagnetic guitar pickup is generally constructed from one or more permanent magnets, wrapped many thousands of times in a coil made of fine copper wire. Most early guitar pickups comprised only one magnet and coil, hereafter referred to as single coil pickups. The weak electrical signal is then passed down an electrical lead to a separate amplifier where the signal is multiplied many times to drive a passive loudspeaker that reproduces the original signal at greater volume.

Unlike a microphone, the electromagnetic pickup does not reproduce the actual acoustic sound waves emanating from the guitar. The natural resonance of the instrument may cause the strings to vibrate in a certain way and this variation is picked up by the transducer, which may explain the differences in sound between two instruments using the same pickup, electrics, amplifier and speakers. As a result, at least in the early days, the characteristics of the pickup combined with the rest of the signal chain probably had more to do with the sound that audiences heard, rather than that of the actual instrument itself. There are innumerable permutations in which the basic components of magnets and wire can be configured to produce different outputs and over the years, pickup designers have used these variations to differentiate their pickups from those produced by others.

Gibson employee, Lloyd Loar had experimented with stringed instrument pickups as early as 1924, shortly before he left the company. Loar attempted to produce an electrical signal from vibrations passed from the strings through the bridge to the magnet and coil. Loar’s work did not lead to a successful product and guitarists had to wait a while longer.

American inventor and musician, George Beauchamp, who had been involved with the National String Instrument Corporation and the development of their resonator guitars, was also involved with another resourceful enterprise at the beginning of the 1930s. He teamed up with Adolph Rickenbacher to form the company was originally called Ro Pat In Corporation, which later became Electro String Instrument Corporation and later still, Rickenbacker, a name that most guitarists will recognise. Ro-Pat-In was instrumental in taking a fundamental new approach to electric guitar design.

Through Electro String, Beauchamp filed a patent in June 1934 setting out his pickup design as part of a complete ‘Electrical Stringed Musical Instrument’. Beauchamp’s ‘horsehoe’ pickup design comprised two ‘U’‑shaped magnets encircling the strings. Beauchamp’s application was granted by the U.S. Patent Office in August 1937. The patent was important because it was for a solid body electric guitar using a magnetic pickup, not just the pickup on its own – the development of the instrument will be covered in the next part of the story so, for now, the focus is solely on the pickup.

Ironically, in February 1936, Guy Hart filed a patent on behalf of Gibson for an ‘Electric Musical Instrument’ and this was awarded by the Patent office in July 1937, just 28 days before Beauchamp’s earlier patent application was confirmed.

Although unknown at the time, another single coil guitar pickup patent was filed in September 1944 by American inventor and entrepreneur Leo Fender. That application was for a ‘pickup unit for instruments’, which was awarded in December 1948. Although not as historically significant as other pickup patents, it was a clear indication of the direction that Leo Fender was heading prior to founding the company that would bear his name.

Another important principle of basic physics caused a significant problem for early pickup designers, and it still does even today. In addition to the desirable characteristic of electrical induction for guitar pickups, electromagnetic coils also act as directional antennae. As far as musical instruments go, this unwanted ‘feature’ means that single coil pickups not only pick up string vibrations but they also pick up interference from alternating mains current used by electrical appliances. Depending on position of the pickup in relation to other electrical equipment, of which there are usually many in a live music venue, the interference manifests itself as a continuous and insistent hum, which is then in turn amplified by a guitar amplifier.

One ingenious solution to the problem of mains‑induced hum was to invent a guitar pickup that still produced a signal from string vibrations while eradicating the interference from nearby electrical equipment. The clever answer was the invention of the ‘humbucking’ pickup, which uses two magnets, each with a coil of wire wound in opposite directions. Electrically induced mains interference affects both coils equally and, because each one is wound in opposing directions, the interference is cancelled out, thereby eradicating (or ‘bucking’) the hum. More importantly, not only do the coils still induce a voltage, they output a stronger signal because there are two coils instead of one. As the problem is all but removed at source, there is no hum to be amplified.

Arguments persist as to who invented the humbucking guitar pickup. Many commentators give the accolade to Seth Lover (1910‑1997), who was an electronics designer working for Gibson at the time and filed a patent in June 1955. Lover’s closest competitor in the race to be recognised for the humbucking pickup came from Joseph Butts, who later worked for Gretsch. Butts filed another humbucking pickup patent some 18 months later in January 1957. It was Butts’ application that was awarded first in June 1959, while Lover’s patent was awarded in July 1959. As far as many working musicians were concerned, the invention was successful and that was all that mattered.

Generally speaking (but not always, especially if obscured by a cover), it is relatively easy to spot the difference between slim single coil pickups and their larger dual‑coil humbucking counterparts. The latter normally have two coil bobbins traditionally mounted side‑by‑side. Within these two broad types, there are many, many different makes and styles of pickup to suit most needs.

Hum is not the only affliction that electric guitar builders have to deal with. All electromagnetic pickups, even those produced today, are prone to audio feedback, which is often heard as an undesirable high pitched shriek or howl. Feedback is a phenomenon called the Larsen Effect after the Danish scientist Søren Absalon Larsen (1871-1957) who discovered it. Audio feedback is caused by a sound loop that exists between an audio input such as a pickup or microphone and an audio output such as an loudspeaker fed by an amplifier. The electrical signal from the input is amplified through a loudspeaker and is then picked up again by the input and so on, continuously. The sound of the feedback is shaped by the resonant frequencies and proximity of the various components in the loop, including room acoustics. Most of the time, feedback is considered problematic and often unpredictable. However many guitarists have learned to harness and control feedback in a positive musical way to create additional sounds.

Some contemporary pickup manufacturers go to great lengths to replicate the authentic tonal characteristics of vintage pickups. One of those widely imitated pickups is also probably the most famous of humbucking pickups. Used on Gibson guitars from the late 1950s, the PAF (Patent Applied For), named after the black sticker on the baseplate, has come to define Gibson’s sound for many guitarists. The PAFs are particularly revered, as they were used in sunburst Gibson Les Paul Standards from 1958‑1960, often regarded as the ‘golden years’ for Gibson.

Today, many independent pickup builders not only pay homage to vintage designs but also strive to create their own distinctive reputation. Third party pickup builders may make OEM (Original Equipment Manufacturer) and aftermarket pickups in a huge range of types. Such companies include Seymour Duncan, Di Marzio, EMG, Lollar and Bare Knuckle, among many others. Pickup choice in the 21st Century is very much down to personal preference and the options are nigh on infinite – very different from the 1930s.

The sounds generated by single coil and humbucking pickups are noticeably different. Not only do single coil pickups tend to produce a weaker signal, they sound thinner and cleaner, while more powerful humbucking pickups tend to sound fatter and warmer. Guitarists noticed this variation and took advantage of the differences to shape their own playing style and develop their distinctive tone. In addition, humbuckers are often considered better suited to overdriving pre‑amplifiers, thereby adding some controllable, distinctive and desirable harmonic distortion, making them popular in higher gain rock music.

By the 1950s manufacturers were commonly using two or more pickups on a guitar for added tonal versatility, initially adding a second or third pickup of the same type, for instance commonly used configurations include 2 humbuckers (e.g. Gibson Les Paul) or 3 single coils (e.g. Fender Stratocaster). Many guitar makers today mix different types of pickups on one guitar to broaden the range of sounds available.

Some pickup arrangements also allow pickups to be engaged in series or parallel or in/out of phase to give musicians a greater number of tonal options. Since the 1970s, pickup designers have enabled the signal from the two coils of a humbucking pickup to be ‘split’ (NB. not ‘tapped’). By using a switch, guitarists may enable a split humbucker to sound either like a traditional humbucker or to emulate the distinctive sound of a single coil pickup. All these various techniques provide guitarists with greater flexibility from their pickup(s).

Simplistically, guitar pickups may also be described either as passive or active. Passive pickups are the basic devices that have been described so far, while active pickups incorporate some form of electronic circuitry in the guitar to modify the signal, normally powered by an on‑board battery. Outwardly, there is often little to distinguish whether pickups are active or not. Putting active electronics into a guitar has been around since at least the 1960s and can range from a simple pre‑amp to boost the pickup signal to elaborate on‑board effects or even low powered amplification.

Since its inception 1930s, the humble guitar pickup has been adapted into many diverse forms. The majority of pickups in the early 21st Century remain passive single coil or humbucking types. However, there have been other pickup innovations along the way diverging from the norm. These alternative technologies include, amongst many other pickup types; hexaphonic (that feed individual string signals to MIDI/synthesizer controllers), piezoelectric (using crystals to induce current), microphonic (converting sound wave vibrations to electricity), electrostatic (using a capacitor to vary electrical capacitance), optical (interrupting a beam of light detected by a sensor), etc.

The understanding of the science behind pickup materials and dynamics between the components has been improved and refined significantly since the 1930s. However, the basic principles behind the passive transducing electromagnetic pickup remain pertinent today and are likely to remain so for the foreseeable future. Magnetic pickups are, by far, the most common type used by electric guitars in the late 20th and early 21st Centuries. This may be about to change.

With the digital revolution, there are numerous innovations occurring today that will lead to radical new pickup designs in the future. Future musicians can expect many new ways of converting the vibrations from humble plucked guitar strings into electrical signals that can be manipulated in ways we cannot yet contemplate. The possibly unstoppable migration from analogue to digital technology will continue. We can only speculate as to how far digital processes will encroach into the hitherto staunchly analogue domain of the guitar. Already, we have seen digital devices that enable the output from a guitar’ pickup to ‘model’ other types of guitar and even other instruments by modifying the signal digitally. We have also seen guitars as being a source trigger for external synthesis and various guitar synths have been around since the 1970s. It seems somewhat ironic that the digital age is enabling ever more accurate simulations of the earliest analogue pickups including the original’s crude and accidental inconsistencies.

While this section of the story is about guitar pickups, it is worth remembering that pickups have also been used successfully on many other types of stringed instrument.

Once the concept had been proven, the next step was to apply actual real‑world pickups in a practical way. There were essentially two methods of implementing an electromagnetic pickup for use on a guitar. One way was to add a pickup to existing acoustic instruments and the other was to invent an entirely new type of guitar with the pickup as an integral part of the design. How these two approaches came about will be covered in the next part of the story.

The pickup on its own, however, is of little use in isolation. Another crucial part of the equation was to take the weak signal from the guitar’s pickup and manipulate it electronically to make it much louder, which is where a completely different solution was needed.

The electric guitar amplifier

Possibly the major challenge with introducing guitar pickups was to turn the tiny voltage produced by the pickups into a sound that provided practical real‑world volume and tone for working musicians playing in noisy bands on the road.

The essential piece of equipment actually comprises two crucial components, the electrical amplifier and one or more loudspeakers. Amplifiers largely fall into two broad categories – either as discrete units comprising the electronics in a ‘head’ unit with loudspeakers installed in a separate cabinet, or with both amplifier and speaker(s) integrated into a single ‘combo’ amp. It is worth looking at the origins of both the electronics and the loudspeaker separately.

For travelling musicians from the 1930s on, amps also needed to be portable, so size and weight were particular considerations, as was electrical safety, durability and reliability. In addition, some degree of industry standardisation to enable interchangeability between instruments, electronics and venues was important.

The Amplifier

In the early days, amplifying a signal from a pickup was all that a guitar amp was really required to do. Controls were very basic, usually just a single input channel with a volume and, maybe, a tone knob. It would take some time before more flexible electronics were added to these basic amplifier circuits. Nowadays, the diversity of amps ranges from the very simple to the incredibly complex. The latter often including, just for starters, multiple switched channels, gain controls, effects loops, digital modelling alongside advanced EQ, flexible on‑board effects and digital interfaces. However, the fundamental principles of amp utility haven’t really changed that much since amps were first invented in the 1920s and when guitarists started to use them in the 1930s.

Put very simply, an amplifier is made up of active electronics that are designed to take an input signal, multiply it many times in strength and output it to a loudspeaker at a volume that is considerably louder than the original input. The electronics of an amplifier comprise essentially two discrete parts, a pre‑amp that controls the incoming signal and shapes it ready to be boosted and output by the power amp section that then drives the loudspeaker(s). It is these two amp sections that determine the overall character and volume of the audio output.

Amplifier output is usually measured in watts and provides a crude indication of power output (volts x amps = watts). The relationship between watts and sound pressure levels heard by the human ear is logarithmic. Generalising, it takes ten times the output power in watts to double the perceived audio volume. In addition, it takes considerably more amplifier power to reproduce low-frequency sound, especially at high volume, so bass amps tend to have higher power output ratings.

While early amplifiers were configured to the environment in which they were most likely to be put, such as practice, studio or stage amps, many modern amps use various techniques to minimise this artificial distinction, such as master volume controls, power attenuators or circuits used to modify amplifier stages to suit.

Up until the 1970s, thermionic valves – also known as vacuum tubes – were a principal electronic component and one that contributed significantly to both the power and sonic character of the amplifier. A valve is a relatively simple device used to control electrical current between its electrodes. The first valve was invented in 1904 by English electric engineer John Ambrose Fleming (1849-1945).

At its most basic, a valve comprises an external glass container used to maintain a vacuum is attached to the valve base. Inside the valve there is a heater, an electron‑emitting cathode/filament and an electron‑collecting anode/plate. Electrical current, in the form of negatively charged electrons, flows through the vacuum in one direction only from the cathode to the anode. An electrical grid can be used to control the current and is the one often used for amplification because the grid can be used to vary the number of electrons reaching the anode and, thereby, controls the amount of gain. Valves are often described by the number of electrodes, for instance; diode, triode, tetrode  or pentode valves (2, 3, 4 and 5 respectively). The humble valve has been used in many applications, such as amplification, rectification, switching, oscillation, and display.

Valves come in many shapes and sizes and vary according to the function they are required to perform in the amp stages. Generally speaking, pre-amp tubes tend to be smaller, while power amp valves tend to be larger.

There are numerous alternatives and variations of valves and there isn’t room to cover the range of technical differences. Thankfully, there has been a degree of commonality in amplifier design over the decades. Typical valves used in pre‑amps include models such as the 12AX7/ECC83. Typical valves used in power amps include models such as the EL-34, EL-84, KT66/77/88, 6L6/5881 and 5150. Valves impart a characteristic ‘natural’ sonic signature and tend to be sensitive to a guitarist’s playing dynamics, which is why they are still widely favoured by many musicians to this day. While technically outdated and obsolete, there is a notable modern‑day industry built around valve production, amp manufacturing and valve amp maintenance.

The valve is the technological precursor to modern semiconductors. Semiconductors are often made of silicon, although they can be made from other materials, such as germanium. A transistor is a solid‑state semiconductor that roughly performs the same function as a valve and is commonly used for amplification. Transistors are smaller, cheaper, lighter, run cooler, are more reliable and more resilient than valves. Some manufacturers produce hybrid amps that aim to take the best characteristics of both valve and transistor technologies.

Taking things even further away from archaic valve technology, electronics using complex digital microprocessors are commonplace. Not only can DSP (Digital Signal Processor) chips produce their own sounds but also they enable a single unit to model a multiplicity of amplifier models that would be impossible using traditional technology. In addition, they can also emulate multiple effects, speaker cabinets, microphone placements, studio interfaces, and so on. Reliable and robust digital processing amps able to be used equally well at home, in the studio and on stage are once again attempting to usurp territory previously held by archaic analogue amps.

Specialist amps are made to make the most of other, albeit similar, electric instruments. For instance, electro‑acoustic guitars (acoustic guitars with pickups) produce a wider frequency range and tend to be ‘cleaner’ sounding than electric guitar amps, which has led to increasingly elaborate amp electronics to cater for the particular needs of acoustic guitar players. Bass amps and speakers are also engineered specifically to provide for the demanding amplification used by bass guitarists. There are no hard and fast rules, the lines are not always clearly drawn and there is inevitably some interchangeability between the general types.

One of the keys to success is to match the characteristics of the amplifier stages to the loudspeakers, so it is worth looking next at the humble loudspeaker and the important part it plays in the guitar sound’s signal chain.

The Loudspeaker

The latter part of the 19th Century was ripe for invention in the field of sound reproduction. As with other sections, only a few of the key milestones can be covered here. Prior to the invention of the modern loudspeaker, megaphones and bulky ‘radio horns’ had been used to increase acoustic volume. However these proved impractical because of their size and weight, limited frequency range and low sound pressure levels.

German teacher, Johann Philipp Reis was, perhaps, the first to develop a rudimentary type of experimental electric loudspeaker in 1861. Alexander Graham Bell was the first to patent his loudspeaker design in 1876 for use in his telephone, shortly followed by Ernst W. Siemens who patented his ‘magneto-electric apparatus’ in 1874. Thomas Edison and Nikola Tesla were also experimenting with sound around the same time. By 1898, Horace Short was working with compressed air drivers and Oliver Lodge was developing a ‘dynamic’ speaker using magnets and moving coils with horns to amplify sound. Danish‑American engineer Peter L. Jensen (1886-1961) is often cited as co‑inventor of moving coil speakers in 1915 and he started applying the technology for use in real world situations. Jensen founded his company, Magnavox, in 1915 to market products for telephones and public address (PA) systems. Magnavox is now part of the massive Philips corporation.

Things changed considerably in the 1920s with the introduction of the first amplified moving coil loudspeaker using a conical paper speaker diaphragm, which was invented in 1925 by Edward W. Kellogg and Chester W. Rice, both of whom worked for General Electric in New York, USA. Their research was important as it established both the principle of the amplifier to boost a signal and a speaker able to reproduce a wide and uniform frequency range. Rice filed a patent for the electrodynamic direct radiating ‘loud speaker’ in 1925, which was awarded in April 1929. Their speaker was introduced to the market under RCA’s Radiola brand in 1926.

Early speakers used powered electromagnets, as permanent magnets were scarce at the time, although Jensen released a fixed magnet speaker in 1930. Lightweight Alnico alloy magnets became available after WWII, making the technology more accessible enabling further innovations to take place. Other inventions along the way included, for example, 2‑way systems using a crossover to separate frequency bands (1937) and coaxial speakers (1943). Once the concept of the moving coil speaker had been proven in practical applications, it has become the de facto standard within the music industry for nearly a century.

The loudspeaker, as we know it today, is essentially a mechanical electroacoustic transducer that serves the opposite function to a microphone in that it converts an electrical signal into sound waves. A traditional moving coil speaker is passive in that it relies on an already amplified signal being fed to it and it doesn’t require its own power supply. The incoming amplified signal is fed into a coil of wire, known as the voice coil, suspended between the poles of a permanent magnet. The voice coil is attached to the apex of a conical diaphragm known as a speaker cone, originally made of paper. The outer edge of the cone is mounted within a fixed metal chassis, usually within a cabinet. The electrical signal makes the voice coil move back and forth rapidly within the magnet thereby pushing on the cone to produce sound waves. The more air that the moving speaker cone displaces, the louder the perceived sound is. Different sizes and types of speaker are used to deliver different sound frequency ranges. Generally, larger speakers are used to deliver lower bass frequencies and smaller ones used for higher treble frequencies.

Loudspeakers are usually attached to a flat panel (baffle) with circular holes cut into it such that the sound waves produced by the speaker cones can escape directly into the listening environment. The baffle with its speaker(s) is normally mounted inside either an open‑back or closed‑back wooden cabinet.

Like amplifier outputs, speaker output is usually measured in watts, which is the electrical power needed to drive the speaker. More watts generally, although not always, indicates greater volume. Like all electrical devices, a speaker provides some opposition to the signal being fed into it, called impedance, measured in ohms. Some speakers are ‘hard to drive’ and have a low impedance, which means that it requires greater current from the amplifier to result in the same output level than a high impedance speaker. As a result, it is important to match a speaker’s characteristics to the amp that is driving it.

Most loudspeakers, even those produced today, are relatively inefficient devices with only about 1% of the electrical energy being converted into acoustic energy. Most of the remaining energy is converted into heat. The sensitivity of the speaker describes how much relative electrical energy is converted into sound pressure level, measured in decibels.

The other important factor for loudspeaker performance is its frequency response. Human hearing generally covers the range 20-20,000 Hertz (cycles per second). People’s sensitivity to frequencies is not uniform and it varies depending on pitch. Human hearing is usually most sensitive in the 2,000-4,000 Hertz range.

Famous names in the field of loudspeaker manufacturing today include Celestion, Jensen, Weber, Electro Voice, JBL, Bose, Fane, Altec Lansing, Mackie, and Peavey amongst many others.

Despite its many drawbacks, the moving coil loudspeaker was (and generally still is) the most effective mechanism for the job and they remain in very wide use today. Speakers come in a multiplicity of shapes and sizes and are used in so many different ways. However, like the pickup and amplifier, the basic principles of speaker design can be traced back to the early part of the 20th Century.

 

Guitar Amps

Initially, bulky battery‑powered valve amps and speakers were used in PA systems and in movie theatres of the time. Because of their bulk and relative fragility, these early systems tended to be fixed installations. From c.1927, portable AC mains‑powered amps became available and musicians started to adopt the technology.

In 1928, Stromberg‑Voisinet advertised the first electric instrument and amplifier package. However, it was not a commercial success and no verified examples exist today. In 1929, Vega introduced a portable amplifier to be used with banjos.

It wasn’t until 1932 when the Electro String Instrument Corporation – later to become Rickenbacker – was formed to bring the electric guitar to market that things really took off. Electro launched a ‘high output’ guitar amp to accompany their new solid body electric lap steel guitars, as Hawaiian music was highly popular at the time across America. The first commercial solid bodied electric guitar and amplifier made by Electro String essentially established the format for early combo amps comprising an electronic amplifier mounted inside a wooden cabinet along with a speaker. The new combo amp also had a carrying handle to make it portable and, shortly after, the company added metal corners to protect the cabinets in transit.

In 1933, Dobro introduced the first guitar amp combo with twin 8 inch speakers. By around 1935, the demand for amplified electric guitars became unstoppable and the electric guitar music revolution had begun. Other companies such as National, RCA Victor, Audio-Vox, Vivi‑Tone, Premier, Vega, Kay, Valco and Volu‑Tone, promoted their own amps to musicians, with varying degrees of success during the 1930s and 1940s. Gibson was also experimenting with amplifiers in the early 1930s although none were made commercially available at the time. Most of the early valve amplifiers were low powered by today’s standards, usually less than 10-15 watts and using small speakers, often of 10 inches or less in diameter.

In 1938, American electronics technician, Clarence Leonidas ‘Leo’ Fender (1909-1991) established Fender Radio Service to repair a wide variety of electronic equipment. He found that musicians would come to him for PA and amplifier repairs and rentals. Seeing the potential of the music industry and started to focus more on musical equipment manufacture. Fender began a short‑lived venture in 1944 with Clayton ‘Doc’ Kauffman, a former employee of Rickenbacker called K&F Manufacturing Corporation with the intention to build Hawaiian lap steel guitars and amplifiers.

In 1946, after Kauffman and Fender parted company, Leo founded the company with which he will forever be associated, Fender Electric Instrument Manufacturing Company, based in Fullerton, California. Shortly thereafter, they introduced the first guitar amps carrying the Fender name. Early Fender combo amplifiers included the Fender Princeton (1947-1979) and Champion 800 (1948-1982).

In 1952, shortly after Fender introduced their Broadcaster guitar which would become the legendary Telecaster, the company introduced what would be, perhaps, its most celebrated combo amp, the famous Fender Twin. The Twin moniker derived from its dual 12 inch speakers. The Twin has been released in many versions over its long history, with its power output ranging from its original 25 watts to a high of 135 watts in the late 1970s. The perennial Fender Twin remains in production today and has become an industry standard.

Meanwhile, based in Kent, England Tom Jennings (1918-1978) founded British company Vox in 1947 to produce musical equipment. It wasn’t until 1958 that Vox released its first guitar amp, the 15‑watt AC15. A year later, at the request of The Shadows’ guitarist Hank Marvin, Vox introduced its most famous model, the AC30, intended to compete with America’s powerful Fender Twin amp. The AC30 proved to be a very successful product and in updated form, it remains in production today.

It wasn’t until the 1950s that mass produced guitar amplifiers really became commonplace and incorporated many of the features now expected from an amp including, for instance, multiple tone controls, tremolo and reverb.

In addition, contemporary popular music of the time was developing rapidly and guitarists began to experiment by overdriving their amplifiers to distort the guitar’s sound at much higher volumes. From the mid‑1960s guitarists sought to control the level of overdrive and distortion (also known as clipping) as a creative tool. One particular characteristic of natural valve distortion is that clipping also tends to compress the signal as the volume is increased, meaning the output tends to sound ‘thicker’, rather than louder, emphasising the guitar’s sustain.

Guitarist Dave Davies of English band The Kinks is often credited with popularising guitar distortion. On one occasion, Davies himself admitted to slashing the speaker cone of his Elpico AC55 ‘little green amp’ with a razor blade out of frustration and in the process of doing so, he made it sound distorted and nasty. The Kinks’ song, ‘You Really Got Me’ (1964) is often cited, rightly or wrongly, as the first hit record featuring heavy guitar distortion (using a Vox AC30).

The search for new guitar sounds in the 1960s helped to ignite the drive for compact guitar effect pedals, initially with simple fuzz and wah effects. A whole industry developed during the late 1960s and 1970s including brands such as Electro‑Harmonix, MXR, Maestro, Boss and Ibanez, amongst many, many others. Effects have ever since been used to complement guitars and amps as an integral part of a musician’s signal chain. The market for effect pedals has grown into a massive industry in its own right.

The development of guitars, amps and popular musical styles of the 1950s defined the template on which succeeding generations of guitarists would build incrementally. Many modern amps and amplifier innovations hark back to the best examples of this ‘golden’ period. Driven by the success of the 1950s, particularly the popularity of Fender amps, the quest for more volume seemed unquenchable. The first 100 watt amps were made by Leo Fender for surf guitarist Dick Dale, while Jim Marshall of legendary British amplifier manufacturers Marshall did the same for Pete Townshend and John Entwistle of rock band The Who.  Dr. Jim Marshall OBE was affectionately nicknamed, ‘the father of loud’.

High power, high gain valve guitar amps became the norm at the end of the 1960s and into the 1970s. It was not uncommon to see large stages filled with gargantuan ‘stacks’ of loudspeaker cabinets powered by banks of high powered amps. Marshall is the brand most associated with the classic guitar stack, which at its simplest comprises a 50 or 100 watt amp on top of two 4×12” closed back speaker cabinets, thanks again to Pete Townshend of The Who as well as the likes of Jimi Hendrix and Eric Clapton. The guitar stack has since become inextricably linked with hard, heavy and metal rock music. Music and its essential components very much reflected the cultural and social changes of the times.

There have been several technological challenges to the humble valve. A concerted trend away from vacuum tubes towards solid state transistor amps occurred in the 1970s, led by companies like Roland, Peavey and H/H. Other manufacturers adopted a best‑of‑both‑worlds approach by making hybrid solid state/valve amps, led by Leo Fender during his time with Music Man.

Arguably, Fender, Marshall remain the two predominant and recognisable amplifier brands and, respectively, have come to define the ‘American sound’ and ‘British sound’ respectively. Notably, unlike Fender, Gibson has never had much commercial success with building guitar amps, despite producing some credible models along the way. There are now a myriad of other amplifier manufacturers including famous brand names such as Mesa Boogie, Peavey, Ampeg, Randall, Rivera, Bogner, PRS and Supro in America, and Vox, Orange, Blackstar, Victory, Hi-Watt and Laney in the UK. Outside the USA and UK, there are many successful brands including Hughes & Kettner, Engl, Line6, Roland, Yamaha, BOSS, etc. In order to keep production costs down, many budget models are now produced in the Far East, while the majority of small boutique amp builders cater for the high‑end, being manufactured in limited numbers in America and Europe.

Many other famous brand names have passed into history, such as Traynor, Sunn, Multivox Premier, Univox, WEM/Watkins, Sound City, H/H, Selmer, Cornford and Carlsbro although, to be fair, some of these continue to operate in some form or other and may well be rejuvenated at some point. There are far too many brands, past and present, to mention here.

Ironically, there is increasing interest in capturing the retro sound and looks of the earliest guitar amplifiers. Many companies are now recreating classic analogue models of the past, often incorporating modern adaptations for reliability, safety and convenience to meet the demands of today’s guitarists. There are many boutique amp builders looking to take the best of old and new and present something different from the current mainstream manufacturers.

At this point, no article focusing on guitar amps would be complete without mentioning Dumble amplifiers. Dumble amps are made in very small numbers by Alexander ‘Howard’ Dumble in L.A., California, often by request of well‑heeled professional musicians. The Dumble Overdrive Special is widely regarded as the zenith of limited production boutique amps and, as a result of their quality and rarity, new or used examples have gained almost mythical status and demand extremely high values on the open market.

Despite the remarkable sustained popularity of valves, digital modelling technology is now making major inroads into the tube’s traditional territory. As the technological advances behind digital modelling processors that began with the iconic Line 6 Pod through to ever‑improving digital advances from companies like Fractal and Kemper. The audible difference between the ‘antiquated’ originals and modern digital recreations is rapidly diminishing to the point where professional musicians see a competitive advantage in moving to a digital platform.

Despite stiff competition from solid state and digital circuits, the valve guitar amp currently remains the de facto standard for many discerning professional guitarists, despite the decidedly old-world technology involved. It will be interesting to see how long genuine valve amplifiers will continue to prosper in the face of the digital revolution. Only time and hindsight will tell. It is likely that valve, analogue solid state and digital technologies will be able to coexist for many years yet.

Get connected

Guitars need to be connected to an amp in order to work, often with effect pedals in between. Before wireless and/or digital technology takes over completely, the venerable guitar lead has been the necessary link between input and output since the 1930s. At each end of a traditional interconnecting lead is a remarkable piece of analogue kit that most guitarists rarely think about but cannot live without. Similarly, guitars, amps and effects also have the other part of the same connection.

The essential connector in question is the ¼“ (6.35 mm) jack plug and its associated socket, which originally dates from c.1878. The first jack connector was invented by George W. Coy and was used for the first commercial manual switchboard at the telephone exchange in New Haven, Connecticut, USA. It is astonishing that, after nearly 1½ centuries, this enduring piece of industry standard equipment is still in ubiquitous use today, long after it became obsolete in telephone systems.

End of Part IV

This has been a self‑contained article that departs from the usual topic of guitars per se. While it might seem a lengthy, in‑depth examination, it only just scratches the surface. As I don’t have the space, knowledge or resources to write comprehensively on the subject, I highly recommend that readers wanting to delve into the historical detail take a look at the innumerable resources available on the ever‑present hinterwebby thing. NB. Credit to all original photographers for images used from Google Images.

Arguably, without the complementary inventions of the electromagnetic pickup, the dedicated valve amplifier and the moving coil loudspeaker, the revolution in guitar technology that started in the 1930s and which really took off in the 1950s would not have been possible. It is notable that the scientific principles underpinning today’s electric guitars are still relevant nearly a century later. It is, at least to me, remarkable that, technically, we haven’t really evolved a great deal over the intervening decades. Advances have been incremental refinements, rather than ground breaking. Digital technology may change all that. Watch this space.

At long last, in Part V, the story will finally unleash the breakthroughs that led directly to the early electric archtop and solid body guitars. The next revolution in guitar music making was about to happen. Who could possibly have anticipated the impact that the congruence of the three seemingly innocuous bits of music technology covered above would have when brought together.

I hope you have enjoyed the journey thus far and thank you for reading. I also hope that you’ll come back and join me on the next part of the guitar’s long journey to the current day. Time to get some vintage gear out and plug in. Until next time…

CRAVE Guitars ‘Quote of the Month’: “Excess in any form does not indicate wisdom; rather it evidences the lack of it”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

February 2018 – Dear Editor

posted in: Observations, Opinion | 0

Due to difficult personal circumstances, the February article is a little shorter than usual. This is probably a ‘good thing’. I apologise for any poor writing this month. I hope that abnormal service will be resumed a soon as possible.

The Trigger

As with many of my articles, the interminable dialogue is prompted by the seemingly innocuous and/or irrelevant. It’s just the way my weird and curious brain works. So just what was it that kicked me off this month?

If I get any downtime from caring duties, I try to read the occasional ‘letters to the editor’ in the music press. These contributors to mankind’s greater knowledge often use the medium as an opportunity to air their particular gripe or beef about this, that or something else. In doing so, it is almost as if they genuinely believe that their critical rant is the only possible legitimate stance and that what they say should not only be heard but also it should be accepted as the one and only universal truth. Looking at these self‑proclaimed prophecies from the other end of the proverbial telescope, editors like a bit of inflammatory narrative to stir up a cauldron of contradiction to keep avid readers coming back for more intrigue and conspiracy. Many of these editorials, having unleashed said swarm of angry bees, do seem to lose interest before the punters do, often leaving the various counterpoints frustratingly unresolved.

A few simple examples, if I may be so indulgent, so you begin to get an idea about where this is going.

You get the ones who go on endlessly that the word ‘relic’ is not a verb and that intentionally ‘relicing’ a guitar to make it look old/knackered is the most heinous thing you can do to a musical instrument… and they then they go onto complain about the sizeable price premium that companies extract for the privilege of owning a perfectly good damaged guitar. These antagonists do not appreciate some of the exemplary craftsmanship involved in giving musicians reasonably accurate facsimiles of some guitars that either most of us could never afford or, if we could, we would be afraid to use in anger at gigs. Others are just reliced (sic!) for fun. Fender Custom Shop says that there is greater demand for ‘heavy relic’ and historic recreations than for unmarked shiny ‘new’ Shop guitars.

Then you get the ones that prattle on about the stratospherically priced ‘furniture art for collectors’. Some exotic Private Stock Paul Reed Smith (PRS) guitars perhaps come into mind as examples of the breed and there are many custom luthiers out there doing good business with equally flashy designs (e.g. Kiesel, Knaggs, etc.). These guitars, the letter writers claim, are built for aesthetics offered at wallet emptying values. These critics accuse manufacturers and owners of having little interest in authentic music created by ‘real’ guitarists and then go onto assert that the products in question are not real instruments and that they are merely trinkets bought by pretentious ‘collectors’ to show off their wealth. Furthermore, some stretch their argument to suggest that we – the meagre guitar‑playing proletariat – should accept their notion that the luthier’s art should be nothing else but a utilitarian tool.

One further example, just to begin to move the debate to the point… those that argue dogmatically that old=good and new=bad or vice versa and that NOS or VOS (NB. other acronyms are available) guitars are marketing ploys used by corporations to add a few (!) extra $ to the retail price. They generally use similar woods and similar hardware, so the only added value is adherence to historical accuracy and degree of ‘ageing’ applied to make it appear authentic (but falling short of outright relicing). I won’t re‑tread the well‑rehearsed ‘new versus old’ guitars debate here, even though polarised perspectives can fall into the same category as the other examples given above.

In the cold light of day and from an objective standpoint, the inflammatory, dogmatic rhetoric used to fill column inches can seem quite ridiculous, almost as if they are employing reductio ad absurdum to get their message across. What does surprise me is the lengths that these self‑appointed judges go to, to indict the perpetrators for their misdemeanours, regardless of which side of the fence you’re on. What next? Ritual hanging and quartering for suggesting a guitar makes your best mate look effeminate? That’s going a bit far – perhaps the reintroduction of stocks and public floggings will be sufficient. Oops, what did I just say in Latin?

All of the examples above, perhaps obviously, ignore one vital thing. They fail to focus on what it is that the consumer actually wants and what they value (not only in monetary terms). I go back to my mantra of the basic laws of economics and the principle of supply and demand. It is the consumers out there in the wide world that keep the manufacturers in business and the successful companies are the ones that respond to what the customer really wants/needs and set prices at what those customers are prepared to pay for their products.

If the evidence is anything to go by, no two consumers are the same and the tastes of those consumers vary considerably. This suggests to me that what we are observing is simply market reaction to changes in punters’ tastes. That means that, whether you a new or old guitar fan or you like your top‑end quilted maple carved top or your favourite beaten up ‘rat’ guitar, there are products out there to suit you, the buyer. Surely that can only be a good thing for all of us.

In fact, getting to the nub, this economic phenomenon is the cornerstone of marketing. Many people have a misplaced (negative) perception that marketing is just about advertising and/or selling you stuff you don’t want, let alone need. Actually, effective marketing is about identifying precisely what the consumer is seeking and changing their merchandise to satisfy that want/need as closely and as quickly as possible. Successful companies keep their finger on the pulse of short‑term fads, medium­‑term trends and long‑term vogues, and they are constantly adjusting their output to meet all of these market drivers. Unsuccessful companies miss a trick by assuming that the buying public will lap up whatever they churn out, or they assume that price is the only criterion on which purchases are made. The ability for manufacturers to flex is essential for longer‑term survival and prosperity.

Some people seem to delight in telling everyone else what they should or shouldn’t think, do, like, want, use, etc. One wonders upon what basis their authority to proclaim this or that either as a piece of cr*p or the dog’s b*ll*cks. Perhaps the most notable commonality about these diatribes is that their world view seems predicated on negativity, rather than what’s good about our wonderful obsessive, addictive hobby.

Anyone who reads CRAVE Guitars’ articles knows that I am opinionated (!) and don’t mind sharing those opinions with anyone prepared to listen. However, I don’t insist that my sentiments are anything other than part of a much bigger 2-way conversation. I will happily learn new things, listen to various perspectives and, yes, even admit that I may be wrong. I also try to learn something new every day, which means keeping an open mind. The old adage that the more you learn, the less you actually know rings true.

My rationale here is to attempt to unravel some of the hyperbole associated with the often vociferous and polarised contentions of these aforementioned letter writers.

Love & Hate

So, if it were me writing to the music press, what might incline me to rave about and what would inflame me to rant about the global guitar village which we all inhabit?

Well, on a positive, I am fascinated by just about every aspect of music making and listening. Clearly, I have a predilection for vintage guitar, effects and amps. However, it wasn’t always thus and, you never know, it may change again in the future. Like many gear heads, I have plenty of time for just about anything new, old, cheap, expensive, traditional, innovative, plain, whacky, popular, underdog, clean, battered, mass produced, custom/bespoke, etc. ad nauseum. It’s all good! What’s not to like about variety and choice of guitars and guitar‑related equipment these days. I firmly believe there is a place for it all and for everyone who is like‑minded.

Guitars et al are great. No ifs, no buts and no criticisms. I am more critical of my own playing abilities. My rants are more to do with attitude of individuals, rather than guitars. Anyone who reads my drivel will be familiar with my people‑related rather than guitar‑related anathemas (greed, avarice, dogma, lack of respect and integrity, vacuous celebrity, investment speculators, exploitation of the naïve, etc.) and apologies for putting my echo pedal on infinite repeat. Nuff said.

To Crave or not to Crave

Now, here’s a tricky question… Given that guitars are essentially unnecessary physical objects and given that vintage guitars have some inherent financial value, how do I reconcile material ownership with my somewhat socialist perspective on the human condition? Well…I would have to say that in order to justify CRAVE Guitars, there are two important factors involved.

My first excuse is that I’m not doing it (whatever ‘it’ is) to make a profit or to generate a return‑on‑investment. My motive is as an enthusiast, not as a hoarder for personal gain. Quite the opposite, my ‘hobby’ has made me very, very poor indeed! Remember that CRAVE’s guitars are not cosseted away, they are played and I share their beauty and my interest whenever I can.

My second excuse is that, to me, vintage guitars are not there to be pedalled like normal commodities. I believe that each and every one of them has a cultural and social significance beyond their mere existence. I feel that the history that surrounds them not only can’t be ignored but also needs to be conserved for the future generations. They are of their time and represent a societal context within which they were made, bought, played, sold on, played some more and, eventually ended up with me (for now). More important is the music that they have made in the hands of musicians over the decades. You probably don’t ‘get’ my odd view of vintage guitars are more than just bits of wood, metal and plastic to be traded… but that’s OK. I expect and adversative response to my observations and commentary.

These two factors support my assertion that I don’t regard myself either as a dealer or a collector per se. It also accounts for why I don’t pursue (and can’t afford) ‘collector’ or ‘museum‑grade’ guitars – I prefer some signs that they have been used (but not abused) and enjoyed as musical instruments not trinkets. If vintage guitars were in genuinely ‘as new’ condition, I wouldn’t feel comfortable picking them up and playing them in case I damaged them. If they are already marked, then, for some reason, it’s different.

Don’t get me wrong, some guitars are so beautiful that they have to be admired. However, that shouldn’t be at the expense of playability and sound. Guitars are fascinating because of their unique combination of looks, feel and tone.

Quite what CRAVE Guitars is, has still to be resolved and I continue to agonise over what to do with the enterprise. For now, I will continue on my quest to showcase affordable vintage guitars to anyone who may be interested.

CRAVE Guitars Logo

Summary and Conclusion

My underlying message is that we could always try and refrain from being negative about the things we don’t like and celebrate what we do like. Heck, I have an opinion on just about anything that comes across my path but hopefully, I am wise enough to differentiate between prejudiced personal preferences and evidence-based fact. Even the latter only remains valid until better evidence comes along and we have to recalibrate our understanding of the world in which we rent space.

Personal circumstances over the past few years have highlighted that life really is too short to get hung up on things that are inconsequential. It is important to care about what matters and to be cognisant of the fundamental truths to which we are all subject.

In the end, it surely is a case of each to their own. If you love or loathe relic/aged guitars, that’s fine by me. If you think exotic woods/finishes are fab or feeble, that’s entirely up to you. If I you desire or detest old/new guitars, then who am I to attempt to deter you? As the old saying goes, “you pays your money and you makes your choice”, and perhaps that is a basic principle we should accept and respect.

As guitarists, we could set a good example and try our best to live in peace, love and harmony. Perhaps we could try to be a little less judgemental about the wonderful tools of our beloved trade although, admittedly, it can be fun to prod the sleeping giant on occasions, if only to keep them on their toes. Perhaps, more importantly, why not forget about abusing other musicians’ predilections and just get on with making some good ol’ guitar music with one’s chosen weapon of choice? That’s convinced me; I’m off to play mine. Now what shall I go for today – fancy or plain? Actually, it won’t improve my playing but who cares? Until next time (hopefully)…

CRAVE Guitars ‘Music Quote of the Month’: “Accept nothing simply because someone asserts something to be the truth, whether they are in ‘authority’ or not.”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

November 2017 – New In: Underdog Vintage Guitars

posted in: Observations, Opinion | 0

A couple of articles ago (September 2017 – ‘A Map Leads To Some Hidden Gems’ → click here to read the article), I looked at the unlikely significance and influence of the 1983 Gibson USA Map, which was at the time the newest addition to the CRAVE Guitars fold. The Map was an unusual promotional guitar that Gibson produced in very small numbers for a very short period, for a specific purpose.

1983 Gibson USA Map

→ Click here to read the feature on the 1983 Gibson USA Map

In that article, I explored some of the other ‘forgotten’ Fender and Gibson guitars from the late 1960s through to the early 1980s. I suggested that, despite being minor relatives in the guitar family tree, the ‘lost’ models merited greater exposure and recognition. In order to understand the context within which these ‘forgotten’ guitars appeared and subsequently disappeared, it’s worth looking at what was happening during those 10-15 years.

Up to the late 1970s, two guitars from the same batch could be quite different and others were cobbled together from what was available at the time. This disparity was a problem for manufacturers, dealers and musicians alike. During the 1970s, the unpredictable variation in materials, processes and standards was seen as a bad thing from a quality assurance point of view. The big corporations that owned both Fender and Gibson at the time (CBS and Norlin respectively) partly tackled the issue by increasing mechanisation and automation, as well as exploring the use of alternative materials. They also sought to experiment and innovate in an attempt to overcome some of the perceived problems in supply and distribution chains, which resulted in a swathe of new models at all price points. By the mid‑1980s, Fender and Gibson had moved mass production of their budget brands off-shore (as Squier and Epiphone respectively) and American manufacturing had become more ‘industrialised’. The benefits of industrialisation included greater construction consistency, as well as improved economy and productivity. Management didn’t understand that the unintended downside for many musicians was that the changes removed some of the quainter charms of experimentation, problem‑solving and hands-on guitar building that players actually valued. I believe that these inherent tensions are integral to current‑day criticism of many American guitars from that period.

Due to public demand since that time, the rise of big‑brand custom shops, independent luthiers and computer controlled tooling made it easier to diversify and differentiate, thereby enabling greater innovation, customisation and modification. My current vintage cut-off is actually the end of the 1980s. Don’t get me wrong, many fine instruments have been produced since, and many of them are much ‘better’ made than many of the guitars that I showcase. It’s just that the fascinating manufacturing quirks and parts‑bin machinations became less… well… random!

I mentioned at the end of that September 2017 article that the research done to bring some of the ‘forgotten’ guitars to prominence stimulated my interest in some of these marvellous (?!) overlooked, creative ‘mutants’. So, not having really laid my hands on some of these ‘generation-x’ guitars, I put my money where my mouth is and decided to track one down (or, as it happens, three!). So this month also has some ‘new ins’ at CRAVE Guitars that hopefully prove that I am not a vintage guitar snob.

Two ‘Forgotten Fenders’

While the age distribution is fairly even across the CRAVE ‘family’, I am well aware of the numerical imbalance between Fender and Gibson models, so my attention was initially drawn in the direction of the big ‘F’.

After a couple of bidding battles on eBay (loathe it), CRAVE Guitars has now adopted two fine new baby Fenders, although sadly not quite the bargains thy might have been…

1981 Fender Bullet

1981 Fender Lead

It’s the first time I’ve owned either of these two models. I have to say that I am not disappointed by either acquisition. Getting both at the same time makes for some interesting (at least for me) comparisons and observations. The two instruments not only look different, they feel and sound very different. Good! That, after all, was one of the points I was making in my previous article, i.e. you can’t easily pigeonhole or generalise about these instruments, let alone disregard them simply because of their ephemeral existence. Another advantage of these ‘lesser’ guitars is that they often haven’t had the hard life of being on‑the‑road like some more workmanlike ‘professional’ models. In addition, many of the ‘forgotten’ vintage guitars don’t sell for big bucks so they can be picked up for a relatively reasonable sum (at the moment). I have to accept that, while they are now attracting moderate collector interest, they will never turn a decent profit should I deem to sell them on at some point. C’est la vie; at least I can enjoy playing them in the meantime.

The series 1 Fender Bullet is definitely a low-cost entry‑level model, clearly made to a budget during its short production period (1981‑1982). The Bullet was the brainchild of legendary designer, John Page (Fender R&D, then co‑founder and head honcho of the Fender Custom Shop). Page was tasked by the then new management team at Fender (including Dan Smith who was brought in to rejuvenate the brand) with making a guitar that cost only $65 to manufacture (the retail price was $199). He got it down to $66 through some ingenious engineering, e.g. ‘that’ toy-like bent steel tailpiece extension to the scratchplate, which Fender patented.

There seems to be confusion about the source of materials used, with suggestions that some parts were imported from Korea and assembled in the States. Even John Page can’t recall the details with any certainty, so there’s little hope for the rest of us. Strict American trade laws stipulated that it had to have enough genuine American content and added‑value to warrant the all‑important ‘Made in U.S.A.’ decal on the headstock. That’s good enough for me – I am not that much of a vintage guitar elitist to split hairs. I have to say that, of the two acquisitions, the Bullet feels more ‘manufactured’ rather than hand‑crafted but, let’s be honest, that’s not really surprising given its age, target audience and price point. The series 1 Bullet’s body looks to me to be slightly out of proportion compared to its forerunner, the formidable Telecaster. The unusual aesthetic, however, gives it a distinctive indie look which you’ll either love or hate. Its quaintness is all part of the appeal to me – kinda like lusting after the plain redhead girl‑next‑door rather than the pretty blonde prom queen. In fact – confession time – I like the Bullet so much, I think I might try to find an equivalent series 2 Strat‑a‑like version with a maple neck to keep this one company. Watch this space.

1981 Fender Bullet

The Fender Lead I on the other hand is quite a different animal. When is a Strat not a Strat? Well, the Lead kind of fits that bill, taking inspiration from both the Strat and the Tele. Like the Bullet, it had a short production period (1979-1982) and, because it has never been reissued, numbers on the vintage market are limited. The Lead was targeted at professional guitarists on a budget, comprising solid wood, a vintage‑inspired Stratocaster neck, natty electronics, etc. If anything, it suffered from being squeezed into a niche between Fender’s budget ‘student’ guitars and the pro‑level ‘classics’. The Fender Lead also seemed to have a bit of an identity crisis, unsure of what need it was trying to fulfil. The Lead I and III had clever Seth Lover‑designed split coil hot humbucking pickup(s), making the guitar pretty unique in Fender heritage. The inspiration for the single pickup Lead I seems to stem from the trend for early ‘superstrats’ around the 1980 period (cheers Mr Halen & co.). The dual‑humbucker Lead III was only made in 1982 and sometimes appears in a nice Sienna Burst finish. Seemingly in contradiction, the Lead II had 2 single coil pickups like a cut-down Stratocaster. In fact the Lead II’s X-1 single coil pickups went on to appear in the Stratocaster. For me, the Lead I is a great single pickup axe and sufficiently different from both the Lead II/III and other Fenders of the time. The Lead therefore has a bit of that cool & rare interest that keeps CRAVE Guitars growing.

Once Fender Japan was established, the company played with the original American Bullet and Lead designs to the extent that they lost the essential ingredients that made them American in the first place. The guitar lines were rationalised by Squier and subsequent models basically became a Far Eastern Stratocaster copy.

1981 Fender Lead I

One thing is for sure, while I was researching these models both before and after buying them, I was struck that both guitars have a very strong cult following among people who have actually owned and used them. I was prepared to be lemming-like and agree with many vintage commentators that these aren’t serious American Fender guitars but, thankfully, I decided to take the plunge anyway and experience them for myself. I’m glad I kept an open and curious mind. Are they great guitars? To be honest, no, they aren’t up there with the classics that inspired them. Personally, I still have a preference for Fender’s offset ‘student’ guitars like the Mustang but then again, that’s what I grew up using, so I guess it’s not surprising. However, neither are they rubbish (as many might claim) and they acquit themselves well enough to sustain interest as part of the CRAVE Guitars ‘family’.

Commercially, neither of these models really caught the public’s imagination on release, which is why they aren’t commonplace now and why Fender hasn’t reissued them. I quite like that they exist under the radar and remain unfamiliar to most players. All of these factors encouraged me to take up the cause on behalf of these cool, underrated, humble and modest ‘forgotten Fenders’. So that’s Fender covered; now what about Gibson?

One ‘Forgotten Gibson’

It isn’t only Fender that had some ‘lost’ guitars during the late 1970s and early 1980s. Also in my September 2017 article, I took a look at some equivalent ‘forgotten Gibsons’. The early 1980s was a period of intense R&D activity for Gibson. It amazed me that, while I have a number of Gibson oddities from the period, I have relatively few of the ones that I highlighted. Like with the Fender models above, I started a quest for an all‑original, good condition Gibson to start filling the gaps in the jigsaw puzzle.

I decided to start with one of the most unloved models and went in search of what many commentators describe as the lowliest of the low in Gibson’s canon. After yet another bidding battle on eBay (grrr), I secured a lovely example of a much-berated instrument:

1981 Gibson Sonex-180 Deluxe

While I can appreciate why there is universal criticism of the poor old Sonex-180, it doesn’t mean that I totally agree with it. Now that I’ve played it and reflected on its position in history, I think the mass hysteria about how awful it is, is overstated and unfair. Yes, Gibson were trying to cut corners and reduce manufacturing costs and they even had to bypass their own dealer network (hence ‘The Gibson Company U.S.A.’ on the headstock). However, the approach they took with the Sonex-180 attempted to tackle head‑on a number of other issues facing the guitar industry at the time, such as variable quality and quantity of tone woods (and an eye to future timber sustainability), known drawbacks of wood under extreme stage conditions (humidity and temperature), durability (Gibson’s Achilles heel with neck breaks), and manufacturing inefficiencies in production/finishing processes. The innovation and forward looking creativity backfired big time and the instrument was soon consigned to history as a misfire, as did several other models created during the experimental late ‘70s and early ‘80s, each suffering varying degrees of hostility. In my view, at least they tried to break the mould and we should be thankful for that.

If the Sonex-180 had been produced by anyone other than Gibson, it might have had a different reception. When compared with guitars coming from Japan at the time, both Fender and Gibson’s eccentric models could not compete with high quality/low price and mainstream appeal of many far eastern products (often blatant copies of US designs at the time). This polarisation of a competitive market tended to result in exaggerating the consumer’s already negative perceptions of American brand quality.

Don’t get me wrong, I am not trying to put the Sonex‑180 (et al) on a par with the Gibson classics. However, when viewed in isolation and with hindsight, the Sonex‑180 is certainly unique and, despite its reputation, is historically noteworthy within the broader context. I believe that there is a lot to commend this carefully selected Gibson Sonex-180.

To lambast the Sonex‑180’s use of composite materials is a touch unfair. Alternative materials have been used in guitar bodies for many decades. Res-o-Glas (fibreglass) used by National, Airline and Supro, Masonite (hardboard) used by Danelectro, acrylic polymer (Plexiglas/Lucite) used by Ampeg/Dan Armstrong, plastic (Lyrachord) used by Ovation, carbon glass/resin used by Parker, as well as laminate (plywood) used by Gibson, Fender, Gretsch, Martin and many others. James Trussart has popularised the use of metal in guitar bodies while carbon fibre and plastics (e.g. by 3D printing) are now also being used extensively by luthiers.

In addition, many high end Gibsons and Martins now use Richlite, a combination of paper and resin for its fingerboards now that rosewood is a restricted wood and ebony is likely to follow soon (Google CITES – Convention on International Trade in Endangered Species of Wild Fauna and Flora – for further information). Within this context, I suggest that the degree of animosity directed specifically towards the Sonex‑180 is a bit over‑the‑top. For many, though, ‘resonwood’ was seen as a desperate attempt of a failing organisation unable to compete on price or quality.

Furthermore, bolt on maple necks never hurt Fender’s reputation, so why criticise Gibson for using them on the Sonex‑180? Gibson had already used bolt‑on necks on other models including the Sonex‑180s predecessors, the S-1 and Marauder, as well as the Corvus and Ripper/Grabber basses.

1981 Gibson Sonex-180 Deluxe

The case for the prosecution (and rebuttals by the defence)

When undertaking the research for this and previous articles, I recently came across an article by an esteemed guitar magazine that looked at ‘guitars Gibson should never have made’ (including the Sonex‑180 and several other CRAVE-owned models!). In the spirit or hindsight, Gibson’s business strategy may have been imprudent but to claim that they should never have been made is to miss the point completely. The world would be a very boring place if companies only made things that someone thinks they should have made. It also seems poor populist journalism to malign the industry in such a negative way simply because of hindsight. This headline was just one of many misjudged rants out there.

 

I also dipped my toe in the unsanitary toilet bowl of Internet forums. As anyone who attempts to uncover any sort of definitive truth on the Internet will know, forum diatribes are a minefield of everything from helpful assistance and utter hogwash. Facts are frequently frustratingly incomplete and/or often aggravatingly blatantly incorrect. Only through rigorous corroboration and an intuitive nose for plagiarism and BS can one hope to get anything resembling fact. As if the ‘horse’s mouth’ of credible web sites (including Fender and Gibson’s own) wasn’t bad enough, many of the forums are extensively riddled with what I can only describe as illiterate hokum, ignorant opinion and inaccurate assertions. Amongst the tripe, there is, however, valuable material to be had. I don’t claim to be scientifically diligent but I do my homework and aim to be objective with a smidgeon of common sense. This doesn’t mean that I am right, as I freely acknowledge how little I actually know.

As far as the guitars in question are concerned, I can just hear the Internet rife with mutters of, “there’s a very good reason why these guitars should be forgotten’. I think that’s also a bit harsh and I don’t agree with censoring history, as each one is important in its own right. Beauty, as they say, is in the eye of the beholder and there are offbeat pleasures to be had. It’s a bit like that slightly chubby barmaid you’ve secretly fancied for ages and never had the nerve to ask out. While none of the three guitars I’ve covered here are likely to become my favourite go‑to guitars, they are very playable and they are now part of the diverse CRAVE Guitars’ family for a good reason. It is much easier to slag something off without justification than it is to explain in rational terms the positives. There are many supporters of these guitars but their enthusiasm is generally outweighed by the vociferous minority.

You may also well ask, “Why on Earth did you waste all that good money on three pedestrian guitars when you could have got one much better one?” Well, that kind of misses the point of preserving the diversity of guitar heritage, not just the best. Let’s face it, someone has to. History is (or should be) as much about the proletariat as it is about the aristocracy. A viable society needs the peasants as much, if not more so than, the royalty. Had I overlooked the vernacular, I would have missed out on three very interesting and underrated guitars that few other people will have even noticed, let alone considered playing or owning. In any case, I have a few (!) other guitars that fit the ‘better’ bill, so it’s about being able to experience a wider gamut of what’s out there and sharing it with others. Moreover, these new additions certainly fit the criteria for CRAVE Guitars that I covered in last month’s article, ‘What Qualifies As A CRAVE Guitar?’ (October 2017 → Click here to read the article)

The Fender Bullet, Fender Lead and Gibson Sonex-180 featured here and on the CRAVE Guitars web site are in my opinion, unsung, underdog guitars resulting from well-intentioned corporate miscalculation. Fender and Gibson may not have grasped the fundamental needs of musicians in a way that the Japanese did in the late 1970s and early 1980s and the results are for us to debate with the benefit of measured hindsight. My hope is that the vintage guitar community will eventually embrace, rather than attempt to eradicate the underdogs. Perhaps, we should be celebrating creative solutions to known problems and applauding innovations to improve the breed, regardless of whether they were commercially successful at the time or not. When considered in context, it is not surprising that there were some unusual evolutionary dead ends along the way. These are esoteric instruments that are very much of their time. As their many fans will attest, give them a go; they are really much better than you might have been led to think.

Yes I am, once again, challenging established conventions. My aim is to recalibrate public appreciation by just a tiny amount and do my bit to bring about a new equilibrium between the recognised classics and these disadvantaged orphans. I’m not going to be pompous (!?!?) and suggest these lost souls are the best things since sliced bread but they are certainly fine for making toast! It seems a thankless task and it feels like I’m trying to swim upstream against a relentless torrent. Acquiring the product of these strange evolutionary offshoots is, for want of a better way of putting it, intentionally sticking two fingers up at the ‘snobbish’ conservatism of the vintage guitar establishment. Ultimately, it will be the free market that determines values and, although my ability to influence the market is infinitesimal, I have at least tried to buck the trend. Someone has to stand up and advocate for the poor underprivileged urchins.

Forgotten Fender & Gibson Guitars

Lessons

The lessons learnt from acquiring these underdog guitars include:

  1. ‘Lesser’ instruments can still have plenty of character to warrant owning and a real plus is that they look and sound different to what everyone else is using
  2. Overlooked non-collectables can provide plenty of vintage ‘bang for your buck’, especially if you are on a modest budget and as long as you do your homework
  3. It is all too easy to fall into the trap of prejudging a guitar just because everyone else has an opinion. Note: they are not necessarily right!
  4. Some of the ‘forgotten’ guitars are actually pretty cool and rare if you look beyond the superficial contradictory rhetoric. It’s OK to be brave
  5. The mission of an obsessed gearhead in pursuit of vintage guitar treasure is never ending. Next!

The one advantage of auctions on eBay is that, unless there is a crazy bidding frenzy by determined buyers out there (as there was with my Ovation Breadwinner that went for about double what it was worth), the final selling price will generally reflect the prevailing market value. ‘Buy It Now’ prices generally tend to be over‑inflated and ‘offers’ also tend to result in poor value. The days of getting real bargains from ‘no reserve’ auctions are long gone and there are now usually plenty of savvy people who know what they are doing. All three guitars featured this month were won in auctions and probably represent fair prices on the vintage market. This means that there is little likelihood of a high ROI but that’s for those in competitive business rather than the no‑for‑profit regime of CRAVE Guitars.

Perhaps I am fortunate that I am rarely disappointed with a vintage purchase and it is very unusual that I don’t get on with a guitar. Some people seem to have a much harder time connecting with their instruments than I do and, as a result, they seem to have quite a high turnover of guitars that they aren’t happy with. Perhaps I am more diligent and do my homework first, so that there is greater alignment between my expectations and reality. Every instrument has its idiosyncrasies but things that drive other people up the wall don’t tend to get under my skin to the same degree. I tend to tolerate (or even celebrate) a guitar’s unique eccentricities as long as they don’t affect the fundamental purpose of the instrument, which is to translate a guitarist’s intentions into music. I don’t believe it is because I am ultra-selective. I do my research and try to buy all‑original, good condition examples; an approach that usually proves to be worthwhile in the end.

Given the sorry state of the world these days, I am frequently reminded how fortunate I am that I have the opportunity to explore my passion. Owning and playing a wide range of vintage guitars is a privilege that I can’t overstate, even though I’m not in the realms of the exotics. There are, of course, downsides of vintage guitar ownership, including rampant poverty to support the addictive cause. There are always new discoveries to be made.

For me at least, once a guitar becomes part of the CRAVE Guitars ‘family’, I usually don’t want to let it go again – there is too great a risk of that sense of regret one gets from selling ‘the one that got away’. Been there, done that, don’t care for it. Some people treat guitars as disposable items to be bought and sold on a whim with scarcely a further thought. I don’t, and I don’t really understand those that do. That’s probably just me and I’ll mind my own business on that subject.

Conclusion

As usual, I have probably overstated my case to make an unnecessary point. However, in conclusion, don’t underestimate or disregard the ‘forgotten’ Fenders and Gibsons just because some self-appointed guru pronounces that they are “a piece of cr*p” (and that’s a polite quote taken from the forums!), especially if they cannot back up their standpoint with credible evidence and/or rational argument. At the same time, you shouldn’t take my word for it just because I pose a counterpoint to such blinkered doctrine. All I can really ask is that one pauses and thinks before putting finger to keyboard because one might just end up looking foolish. Oops! Too late! Heehee.

Finally, I am proud to plough a different furrow from the masses and have the courage to stand up for the vintage guitar ‘losers’ as much as others do for the widely‑recognised classics. I may be in the minority but I believe that there are valid grounds for doing so. The more the naysayers shout and denigrate these bastard offspring, the more I feel obliged to stand up and defend the runts of the litter. In my view, there is a plenty of space in the collective guitar world for all of them. I, for one, will enjoy the occasional walk on the wild side, rather than conforming to the mundane and uniform.

I can pretty much guarantee that there won’t be any more guitar purchases this year, meaning that there won’t be any more ‘new old’ CRAVE Guitars in 2017. I wonder what 2018 will bring. In the meantime, I will enjoy playing my newly adopted ‘budget’ Cool & Rare American Vintage Electric Guitars. Until next time…

CRAVE Guitars ‘Quote of the Month’: “I have to fight for the underdog because I am the underdog.”

© 2017 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

October 2017 – What Qualifies As A CRAVE Guitar?

When canvassing ideas for this month’s article, I was asked why I don’t feature bass guitars to the same extent as the 6-stirngers. I did point out that CRAVE Guitars is already home to Fender Precision and Music Man Stingray basses. However, such simple questions tend to switch on my stream of consciousness. Not content with answering just this question, I thought I might as well address the similar query I have been asked about acoustic guitars as well as other instruments, accessories, merchandise and even non‑guitar‑related stuff! There are not many pictures this month, as the narrative is mainly explanatory.

The short and simple answer is contained in the acronym C.R.A.V.E. (Cool & Rare American Vintage Electric) Guitars so, if that satisfies your curiosity, you can safely stop reading now. For the masochists out there, a little (!) more exposition is required; sorry.

Expanding the acronym is, however, probably a good place to start, so let’s begin with perhaps the most problematic letter…

C is for Cool (Adj.)

For starters, this has nothing to do with temperature. The cool I am talking about is a very subjective, value-laden word with many subtle and indefinable nuances. In its colloquial context, it can mean ‘excellent’ or ‘alright’, as well as ‘fashionable’ or ‘hip’. Slang dictionaries also cite ‘awesome’ or ‘trendy’. These all seem to me to be both superficial and insufficient when trying to convey what I understand cool to mean. To make it easier, perhaps, these adjectives convey a bit more relevance if suffixed with the word ‘dude’.

In relation to the world’s favourite musical instrument, there are the mainstream guitars, most of which have an inherent level of cool anyway and, as you are reading this article, I don’t think I need to state the bleeding obvious, especially where vintage is also a contributory factor (see ‘V’ below). It is, perhaps, the more unusual guitars, which to me radiate cool. Cool transcends simple descriptions such as character or quirkiness.

How on earth does a guitar become and stay cool, and is there a standardised unit of measurement to quantify just how much cool something has? Quite simply, it simply isn’t that simple. For a guitar to be cool it has to exude some sort of cachet or ooze some sort of wow factor. It may have some quintessential ingredient that makes it irresistibly, achingly desirable to those in the know. Things that are cool are utterly seductive despite any objective rational thinking to the contrary (it may be non‑PC but the same goes for women!).

What one person thinks of as cool can be a complete anathema to someone else, while another person may be completely oblivious to it. This suggests that cool is therefore intrinsically a very personal thing. The fascinating thing about cool is when there is an unwritten collective agreement and a shared understanding that something is more than it appears to be on the face of it. Cool, to me, is therefore an unconscious state of mind that has no palpable embodiment.

Sustained cool that is appreciated by like-minded people can lead to a cult status amongst a relatively small proportion of the population, which everyone else completely fails to grasp. Cool therefore also has a degree of exclusivity. Cool cannot be a universally accepted characteristic; it will always be appreciated by the few and ignored by the many. If something becomes popular on the mass market, it automatically ceases to be cool.

Last month, I mentioned the Fender Bronco, a modest single pickup offset ‘student’ guitar that languished in the vintage guitar doldrums until Alex Turner and Arctic Monkeys burst onto the scene. The band was considered cool and the instruments that they used suddenly became cool simply by association. Consequently, the broad appeal for the Bronco coalesced pretty much overnight. Broncos are still cool and attract vintage guitar market values that were unheard of before the band came to prominence. There are plenty of other examples; for instance, would the humble Danelectro 3021 be the icon that it is today without Jimmy Page or the Airline J.B. Hutto be so sought after if not for Jack White?

The transferable phenomenon suggests that cool by association can be infectious. Cool is, however, not physical or perpetual, as it can disappear just as quickly and inexplicably as it appeared in the first place. Furthermore, you cannot make cool, sell cool, buy cool, or pass something off as cool if it isn’t. It therefore exhibits an unusual characteristic of being both intangible and valuable at the same time.

CRAVE Guitars isn’t about what I think other people may like, it is primarily about what I like. I wouldn’t be arrogant enough to try to tell you whether CRAVE Guitars’ instruments are cool or not, that is for you to decide for yourself. I just hope that I have a certain taste that others can appreciate and relate with. However, just for the record, I think they are pretty darn cool individually and, perhaps more importantly as a ‘collection’. I try to raise awareness of some interesting guitars (and amps/effects) and then pose some questions to challenge broadly held preconceptions. Perhaps you might make the irrational shift of ill‑informed choice and agree with the dude (or not, I sure ain’t gonna argue!).

R is for Rare (Adj.)

You’d think this would be obvious… but there is more to it than that. Rare in this context doesn’t actually mean that they are all genuinely scarce in absolute terms. By rare here, I mean that they are limited in number and therefore finite because there cannot be any more new guitars for a certain model from a certain manufacturer for any given year. This is an undeniable fact.

By rare, I’m also suggesting that each one is essentially irreplaceable. If a vintage guitar is destroyed or dismantled, there is a unit reduction in the total number of that model that will ever be available. Whether there were only ever just a handful or many thousands of a particular model produced, there will only be a certain number of each guitar in existence that can feed the vintage guitar market now or in the future. Newer instruments will eventually become vintage but these will be additional to, not substitutes for, what went before.

In addition, each vintage instrument will now be absolutely unique in its own way. Several or many decades of (ab)use bestow certain vestiges of age that are individual to that instrument and which cannot be reproduced (sorry, relic fans). It is this distinctive and natural aging that gives an instrument its uniqueness. Even better if guitars have some sort of genuine story associated with them (or sense of mystery if not).

I should also say that rare in this context does not imply value – there are many other characteristics in addition to rarity that dictate whether a guitar is valuable or not. None of CRAVE Guitars’ instruments are truly valuable, sadly, I wish they were. However, some guitars are rarer than others and therefore have a degree of interest associated with them purely because there are not many of them to go around. Others were mass produced at the time and remain plentiful on the vintage market but only for the time being, as attrition will inevitably occur. Just because something is (relatively) abundant, it doesn’t diminish its appeal.

& – At his point, I might as well comment on the ‘&’ in the CRAVE acronym. It doesn’t mean that every guitar is Cool AND Rare. These adjectives are not mutually exclusive. To be honest, a title where the ‘&’ means ‘cool and/or rare; possibly one or the other, perhaps both or maybe neither’ doesn’t make any sense. It is therefore not a qualifier; it is simply a necessary vehicle of the English language, so get over it grammar pedants (say I hypocritically).

A is for American (Adj.)

You might also think that this criterion is straightforward and, of course, it isn’t. Some guitars in the CRAVE family are all-American, which makes things simple. Some, however, have original materials and/or parts imported from other countries. As far as I am aware, none of my guitars (or basses) were wholly manufactured outside America.

I would actually argue that there have been very few instruments that are actually 100% American so, as with other factors, it is all a matter of degree. So we have to start with the premise that ‘American’ implies a significant but not necessarily total part of the process of producing guitars.

It isn’t just that they are designed by American-owned companies. Danelectro, for instance, has its headquarters in the USA, designs its instruments in the USA and manufactures them in China. Other American firms may import the key elements to be assembled and/or QA’d in the States. Does this make them American? I would argue in both circumstances that it doesn’t. To make things easier, I don’t believe that there are any non-American companies that manufacture in the USA for all sorts of political, social, economic, legal and environmental reasons.

What about some of the key parts of a guitar that customers demand and expect? For example, could a guitar with a Brazilian or Indonesian rosewood fingerboard or a Honduran mahogany body genuinely be called American? In this instance, I believe that it can, as this refers to the source of raw materials, not the manufacturing process. The same applies to hardware, e.g. German tuners and bridges, Mexican switches and Japanese potentiometers. We have to accept that American guitars are partially imported in one way or another.

American trade rules were/are very strict about what items can carry the ‘Made in U.S.A.’ label. I won’t delve any deeper into this thorny issue in this article. Suffice to say that, as far as I am concerned, as long as it complies with the definition imposed by the federal USA government, it is ‘American’.

I have often been asked why I don’t go for guitars from other regions such as Europe or Asia. There are some fantastic instruments from non-American territories (see the CRAVE Guitars article from August 2017 – ‘A Peak into the Pandora’s Box of Guitars’ → Read here). For now, to open the flood gates to global guitar collecting would, I believe, dilute what CRAVE Guitars is all about. Also, I just couldn’t cope with it all – it would be way too much for such a small enterprise. For now at least, integrity of the American ‘collection’ is paramount.

Where I do consciously blur geographical lines is in effect pedals where European and Japanese pedals qualify as part of the ‘family’. Why? Simply because they are such an integral part of the British/American music scene from the birth of rock ‘n’ roll onwards. Plus, there are so many global cool and rare effects that it doesn’t make practical sense to be strictly exclusive. As effects are not the primary focus of CRAVE Guitars, I can be a little more lenient. That’s my excuse and I’m sticking to it. Should I need to liquidate funds though, the non-American effects would be at the front of the queue.

At the moment, my vintage amps are strictly American, although I have been tempted by vintage English amps from, for instance VOX, Marshall and Orange, although less so WEM, Hiwatt and Laney. Perhaps it’s because I started playing electric guitar in the 1970s, I also have a soft spot for vintage solid state amps such as H/H from England and Roland from Japan, so I’m not a complete valve snob. I may also be tempted to blur the lines here one day but not for now. There are plenty of great American amps to admire. One difficulty is that they are just too difficult to import and adapt for UK mains supply, let alone maintain. To be honest, I also don’t have space for a lot of amps, so that makes things simpler.

V is for Vintage (Noun/Adj.)

I have covered the various definitions and interpretations of what might constitute ‘vintage’ in relation to guitars before, so I won’t reiterate those discussions here.

Essentially, there is no clear start date for what might become a CRAVE Guitar. Perhaps the early‑mid 1930s might be a legitimate starting point, representing the dawn of electric guitars. However, if someone were to offer me an early 1900s Gibson Style O acoustic archtop or a 1920s National acoustic resonator for instance, I am not going to turn either of those down! Hint, hint.

The end point is necessarily arbitrary. I tend to think of mid-late 1980s as the general cut‑off for many reasons. Anything from 1990‑on is of personal interest, rather than something eligible for CRAVE Guitars. I have retained a couple of modern Gibsons that I use as modern benchmarks and reference instruments to compare with older guitars (and for sentimental reasons). I no longer have any modern Fenders, although I’d like a modern Stratocaster or Telecaster for comparative purposes. Being purely pragmatic, I generally focus on electric guitars from the 1950s to 1980s inclusive – at the time of writing, the earliest is 1959 and the latest is 1989 – a period spanning just 40 years which, in context of guitar history, is nothing at all and may prove to be too restrictive in the future. For now, though, there are plenty of vintage guitars on the market made in those four decades from which to choose.

There is a bigger question about whether vintage is ‘better’ than new. This is not the time for such a complex discussion. However, for instance, in a blind test where touch and sound are the only stimuli, whether a guitar is physically old actually adds anything to the overall music‑making experience or not is debateable. New guitars can be made to look, feel and sound old but, no matter how good the craftsmanship, they cannot actually BE old.

Much also depends on the use to which a guitar will be put. For most working musicians, reliability and durability are probably far more important than age, especially in a live concert environment where the subtle nuances of vintage tone can be completely lost. A gigging situation is also environmentally demanding, never mind the practical risks of taking a valuable and irreplaceable vintage instrument on the road. In principle, modern guitars are in so many ways a much more appropriate solution than their vintage counterparts, particularly for the professional musician. Personally though, modern guitar ownership is no longer for me and what I do, so my focus is for older, lived-in but not worn out instruments.

E is for Electric (Adj.)

As far as acoustic guitars are concerned, sorry, but they just don’t do it for me. I don’t know why. This applies equally to nylon strung classical guitars and steel strung acoustics. Perhaps it’s the sound, perhaps it’s the playability, or perhaps it’s the aesthetics. To be honest, my knowledge of acoustics is very slim compared to their electric counterparts, so I may be missing something obvious in terms of appeal.

I acknowledge that without the acoustic guitar, we wouldn’t have electric guitars as we know them, so the historical significance is fully understood. I am interested in the acoustic guitar’s position in musical antiquity and I am writing about that as a separate piece of research. However, given a choice of picking up a comparable acoustic or electric, the latter would win 9 times out of 10. Personally, I like to plug my guitars in and experience the diverse sonic pleasures of an electric guitar being used for its intended purpose. For recording or stage use, I find microphones for an acoustic guitar a complete pain, whereas I can just plug in an electric, so the latter also wins on practicality.

I often play electric guitars unplugged when practising or noodling. An unplugged electric gives a good indication of the natural resonance of the ‘old wood’. It also focuses the senses on playability and ergonomics. I might suggest that a good electric guitar will come across as good when it is played either acoustically or plugged in. However, vintage electric guitars really come into their own when driving a vintage valve amp, perhaps with the odd vintage analogue pedal added to the mix. In this setting, electric guitars can feel alive with dynamics, touch‑sensitivity and sensory feedback in a way that an acoustic just can’t match, at least for me. I would argue that an electric guitar is also far more versatile with an array of different sounds and tones that it can produce.

OK then, here’s the crux… How many rock guitar gods from the halcyon days of Santana, Green, Clapton, Richards and Hendrix, through the experimentalist era of Page, Beck, Blackmore, Iommi and Zappa to the post-modern virtuosos such as Van Halen, Slash, Vai, Satriani and Vaughan have plied their trade exclusively playing acoustic guitars? None to my knowledge, that’s how many. The truth of the matter is that it’s the cutting, screaming, wailing, sighing, jangling and shredding of the amplified, effected electric guitar in the hands of musical geniuses that has forged the mainstay of the rock (‘n’ roll) paradigm over the last 6 decades or so. There are, admittedly, many acoustic guitar prodigies but they don’t feature on my ‘top guitarists’ or ‘top albums’ lists. I rest my case m’lud.

Arguably, it’s the music that matters, rather than whether instruments are amplified or not. In fact, one of my favourite live albums is Nirvana’s ‘MTV Unplugged In New York’ (1994), so I’m not averse to acoustic music, it’s a simple matter of personal preference. I would also contest that, unless one is within a few feet of an acoustic guitar played live, the sound is amplified in one way or another, whether by an amp, a PA, a TV or a hi-fi. I don’t want to get into arguments about which is better; to me, they are just different.

There are many superb vintage acoustic guitars on the market and in the hands of collectors. With the usual finite resources (time, money and space), acoustic guitars will, for now, remain outside the scope of CRAVE Guitars. In addition, there are currently no real vintage electro‑acoustics out there to tempt me. Whatever the reasoning behind my bias, I’ll leave acoustics for the many specialists already occupying that particular space.

I would, however, like to have a good vintage acoustic to hand, just for those occasions when the mood strikes and one wants to strum or fingerpick a tune for a change. I agree that playing an acoustic brings a whole different outlook on composition, arrangement and performance and they are therefore a great complement to electric guitars. You never know, I might be tempted. Something like an old Martin D28 or Gibson J-200 perhaps? Again… hint, hint.

Guitars (Noun)

This will, hopefully, answer the original question at the start of this article about basses. Basically (haha), I am first and foremost a guitarist and I therefore focus on 6-string instruments rather than basses. For the record, I like playing bass and I think that it is good for guitarists to be able to play bass effectively, as it can improve rhythmic and timing abilities as well as adding a different perspective to songwriting. As mentioned at the top of this article, CRAVE Guitars actually has 2 vintage basses and a vintage valve bass amp as part of the ‘family’, which is enough as far as my personal need goes.

Yes, I’d like a vintage Fender Jazz bass and I’d happily accommodate a short-scale vintage Fender Mustang or Musicmaster bass, mainly because they are so cute, funky and cool. I’d also be quite happy with a vintage Gibson EB-0 or a Rickenbacker 4001 bass if a good one came along at a reasonable price and doesn’t displace a sought‑after guitar. Bridging the gap between guitar and bass, a vintage pre-CBS Fender Bass VI has been on my ‘most wanted’ list for a long time but original ones are becoming way, way too expensive. For the third time, hint, hint.

There are many other variations on the stringed instrument theme from diddley-bow guitars with only a single string through cigar box/oil can guitars, tenors and baritones, 12-string guitars, to harp guitars with many strings, as well as double or multi-neck instruments. Then there are are banjos, mandolins, zithers, hurdy‑gurdys, lutes, bouzoukis, balalaikas, not to mention many Asian instruments, as well as numerous European classical and folk stringed instruments. Again, if only for practical reasons, they are all outside the scope of CRAVE Guitars. As with acoustics and basses, there are plenty of specialists focusing on some wonderful exotic stringed instruments from all over the world, so that means I don’t have to.

While on the subject of CRAVE Guitars eligibility, there are a few other factors that come into play. NB. All of these conditions apply equally to amps and effects.

Condition – Condition is very important for me. This doesn’t mean that a guitar has to be museum or collector-grade, far from it. A well-used vintage instrument will have many visible signs of use that give it much of its charisma. If a guitar is 50 years old but looks as if it was made yesterday, it lacks that unwritten backstory of being used that might make it desirable (at least to me). Conversely, an abused ‘players’ guitar’ is of little interest to me, as it is likely to be in relatively poor condition through misuse – a lack of respect for an instrument is generally not a good sign. Once a guitar has been seriously compromised, it will never be the same again. Even if it is professionally restored, a knackered guitar loses so much of its integrity and originality (see below). The issue of restoration to protect and conserve important musical instrument heritage is another story for another day. Badly damaged guitars are a big no-no for CRAVE Guitars, including major damage like neck/headstock breaks, bad repairs, etc.

Originality – Originality is also very important for me. Irreversible modifications are an issue, including refinishes, routing for pickups, holes, adaptations, etc. I have one refinished guitar, my ‘signature’ 1975 Gibson Les Paul, and I regret having it done back in the late 1970s – it had a lot of buckle rash from the previous owner and it seemed the sensible thing to do at the time. I tolerate minor changes such as replacement pots (where there was a fault), tuners, etc. Several CRAVE guitars have had reversible minor modifications and each one is considered on a case‑by‑case basis. In theory, most bits of hardware can easily be put back to original condition if the correct parts are available. If guitars come with original cases, great: if they come with the original tags, manuals and case candy as well, even better. However, it’s the guitar that matters, not the case.

Affordable – I am a financially poor enthusiast with very limited funds, so my spotlight tends to fall on ‘affordable vintage’ guitars. Fortunately, the cool & rare criteria often make some relatively inexpensive guitars available, compared to the elite high‑end investment‑grade instruments. Market accessibility is therefore an important factor for me. I sympathise with neophytes who are interested in and want to own vintage guitars but find the whole scene too ‘exclusive’ – we all have to start somewhere. The ‘easy entry’ end of the vintage market is another reason why I like to focus on a wide range of instruments including some interesting oddballs within reach of many wannabes. Just to qualify, ‘affordable’ doesn’t necessarily mean cheap, it means cost‑effective and value‑for‑money, which can mean different things at different price points. Recently, I have paid (considerably) over market value for a couple of instruments in which I had a specific interest, so I’m not a very good businessman with an eye on future profit margins.

Other Stuff – Another question I’ve been asked is why I don’t sell ‘other stuff’ to support the core vintage guitar enterprise. Three principal reasons; a) I don’t have the money to spend on ‘other stuff’ even if it could partly subsidise the core ‘business’, b) I don’t have sufficient time or space to achieve the core ‘business’, let alone anything extra‑curricular, and c) I’m generally not that interested in ‘other stuff’. I would like to diversify into CRAVE Guitars merchandise such as t-shirts, mugs, plectrums, cards, etc. (orders, please). I might also be tempted into vintage guitar related miscellanea such as jewellery, memorabilia, etc. Diversification also relies on surplus amounts of a) and b) above which, frankly, is looking highly unlikely. The discipline of focusing predominantly on Cool & Rare American Vintage Electric Guitars (now that it has been defined) has to remain relatively pure or I will never be able to make a going concern of it.

The CRAVE Guitars Brand – Brand identity is essential to back up the umbrella CRAVE Guitars trademark. Strategically, if I had more time, money, energy and space, I would definitely create 2 key partner enterprises for vintage instruments to complement CRAVE Guitars. Despite what I said above, CRAVE Basses and CRAVE Acoustics would be on the cards. The ‘E’ part of the acronym becomes a bit less relevant for acoustics (however, I have thought of a solution to that too) but the spirit remains integral to the original concept. My long‑term intention is to create a further 2 complementary enterprises for CRAVE Amps and CRAVE Effects. I may permit someone else to use CRAVE Drums, CRAVE Keyboards and CRAVE Stage & Studio though (unless I change my mind in the meantime). Just be aware that, in terms of copyright ownership, I thought of these first – royalties in an envelope please! I would consider flexible partnership arrangements with a like-minded obsessive keen to expand the CRAVE franchise into these areas, as long as the necessary resources accompany the mission.

Virtual CRAVE Guitars – Social media, predominantly Twitter, takes up a considerable amount of time as does the web site (www.craveguitars.co.uk), including researching and publishing these articles. The social media topics covered are essentially guitar‑related but draw from a very broad interest, encompassing material way beyond the tight C.R.A.V.E. criteria. The problem I have with it is that it is highly resource intensive and the activity intrinsically will never make any money, it is purely about entertaining a diverse audience and raising the profile of what CRAVE Guitars is all about.

In Summary

So, to précis all the above, I use a few simple rules to separate out the ‘wheat from the chaff’. Regardless of brand, price or reputation, CRAVE Guitars should be:

  1. Cool – Quirky, unusual, unique or a variation on a theme, preferably with some added character and interest
  2. Rare – All things being relative, supply is limited, including short-lived or small‑run production models
  3. American – Possibly my one hard and fast rule, the all‑important ‘Made in U.S.A.’ mark
  4. Vintage – Manufactured between c.1950 and 1989 – possibly earlier and unlikely to be later
  5. Electric – I’m not really an acoustic guitar fan. Electric archtops, semis, hollow bodies and resonators are fine though
  6. Guitars – Mainly 6-string instruments. Basses are included but they are not the primary focus

In addition, being pragmatic, a CRAVE Guitar needs to be:

  • In good condition with no serious damage or alterations
  • All‑original or very close to it with no irreversible modifications
  • Cost‑effective and good value‑for‑money

One last pertinent comment before I shut up is to mention the alternative meaning of the word ‘crave’, which is ‘to desire’, ‘to yearn for’ or ‘to want greatly’. This double‑entendre is both important and intentional. Ultimately, it comes down to a simple rhetorical question when looking for vintage guitars (et al), “Is this a really cool guitar that I would want to own and play?” If the answer is “yes”, I would want to showcase it for others to (hopefully) appreciate. However, if I can’t live with a guitar, I wouldn’t dare to presume that it might be of any interest to anyone else. If I don’t hanker after a particular guitar, it doesn’t join the CRAVE ‘family’ no matter how much it is worth.

It is only when all these factors come together that a guitar is likely to join the CRAVE Guitars clan. I am not a dealer and CRAVE Guitars is strictly a not‑for‑profit passion project. Once adopted, a guitar tends to hang around for a considerable period of time. I tend to enter into relationships with my guitars, which means that I’m not one to buy and sell instruments on a whim. I would need strong persuasion to part with one of the ‘family’.

I am amazed that, reflecting on the ‘rules’, they have hardly changed in over a decade, which is encouraging. 10 years ago, when I started to thin the herd and began to refine the ‘business’ model above, the focus was quite strictly on acquiring vintage guitars made by Fender and Gibson. I now realise that this was too exclusive and the net is now being cast more widely. I do, however, remain selective and anticipate that the mainstays of the ‘family’ will remain vintage instruments from ‘Big 2’. Why? Quite simply, that’s what I grew up aspiring to own one day and I suspect that the same applies for many other guitarists who grew up in the 20th Century. The future may well be different and that will be for someone else to take up the mantle long after I and CRAVE Guitars have faded into posterity.

I can put my hand on my heart and swear that I believe that (most of) the guitars that have made up the ‘family’ over the last decade conform to these basic principles. As a core operating model, I think that the principles are helpful and clear, which may become an advantage should CRAVE Guitars become a successful business one day. The principles also differentiate what I do from the competition.

You may well disagree with my philosophy and choice of guitars (et al) but, to be uncompromisingly blunt, that’s not my problem. CRAVE Guitars is internally consistent. If you want to do your own thing using your own preferences, that’s entirely up to you and I wish you well.

In conclusion, now having defined the objective, justified the criteria and articulated the rationale, I hope that the idea behind CRAVE (Cool & Rare American Vintage Electric) Guitars makes some (common) sense. I think that I have also provided answers to both of the specific question about bass/acoustic guitars, as well as the bigger picture question of what it takes for an instrument (or amp/effect) to be considered a member of the CRAVE Guitars ‘family’.

What’s coming up? Well, I hope to have some ‘new in’ headlines for the November 2017 article. In the meantime, I think that it’s time to warm up those vintage valves and plug in my ‘guitare de jour’… now which one shall I go for? Until next time…

CRAVE Guitars ‘Quote of the Month’: “Integrity is doing what you believe to be right and your conviction to stand up for it in the face of concerted opposition.”

© 2017 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?