June 2020 – Whazzup at CRAVE Guitars

Prelude

WELCOME BACK ONCE again guitar fans and hello to any new visitors. We are now half way through an extraordinary 2020 and the world is still turned upside down in so many concerning ways. While there may be glimmers of light at the end of the tunnel for COVID‑19, there is still a long way to go and there will be profound ramifications that it will leave in its sizeable wake. At the end of last year, we had no inclination as to what was about to befall, yet here we are now. Perhaps us hooman beans really aren’t as clever as we seem to think we are (shock, horror – hold the front page!). It seems that we also still have some way to go before all people are deemed equal and can live their lives freely, responsibly and peacefully. The first half of 2020 has passed by very quickly and, frankly, good riddance to it. I don’t like wishing life away but it has been 6 months that I’m sure we could all have done without, everything being on‑hold.

Well, here we are and no more historical facts, quotes or predictions on which to ponder this month. I said at the very end of the last article that I would get back to pontificating about ‘cool & rare American vintage electric’ guitars and, at last, I can deliver on that promise/threat (delete as applicable).

There are 3 themes on which I’d like to embark this month. Firstly, I mentioned in my December 2019 article that I had bought some gear (big surprise… not) during last year but I didn’t go any further than to list what they were, without any indication as to the whys and wherefores behind the spending spree. Secondly, after 18 months, most of the 42 repatriated guitars have now been properly assessed and worked through as far as I am able. So far, I haven’t given any real sense about what I found and what I learnt from the exercise. Thirdly, there have been a number of purchases during the first half of 2020 and in due course I can reveal what those are and how they relate both to the existing ‘collection’ and to the ‘wanted’ list from that same December 2019 end‑of‑year/look‑forward roundup.

I think that there is more than enough material to occupy one article, so without further ado, let us begin at the beginning. Sitting comfortably? Good. Then, we’ll begin…

2019 CRAVE Guitars’ Purchases

An Introduction to the 2019 CRAVE Guitars

2019 was certainly an interesting year. Due to circumstances, I started out not anticipating much in the way of guitar purchases. The relatively modest vintage guitar ‘wanted’ list from December 2018 included a Danelectro of some sort, a Fender Starcaster and a Gibson Melody Maker. These had all featured on the target list for more than one year, so it seemed a fairly realistic expectation. What actually happened was a bit more fruitful than I foresaw and I think it deserves some rationale to indicate why they weren’t random purchases. In fact, 2019 resulted in nine new additions to the CRAVE Guitars family, spanning five decades (1940s‑1980s with at least one from each). I couldn’t really afford the outlay but, although it meant sacrifices in other areas, it has probably been worth a bit of hardship. I hope you find this array of short stories moderately interesting.

1982 Fender Bullet H2

This is what happened when esteemed Fender designer John Page was tasked with creating a low cost student model to carry the ‘Made in U.S.A.’ decal and replace the outgoing Mustang and Musicmaster? The result was the Fender Bullet. I’d already acquired a 1981 Fender Bullet which was essentially a Telecaster‑on‑a‑budget model. Several aspects of the first iteration intrigued me and I set about looking for a second generation model, with the more Stratocaster‑like body outline. Initially, I was looking for a ‘standard’ one with twin single coil pickups and the integrated bent steel pick guard and bridge assembly, just like the ‘Tele’ Bullet. Instead, I found a cool Fender Bullet H2 in great all‑original condition in very smart red and white with a maple neck. This version has a more robust standard integrated hardtail bridge/tailpiece with through‑body stringing. The H2 features what at first glance appear to be standard twin ‘humbuckers’. However, looks can be deceiving. The pickups aren’t actually traditional humbuckers – they are actually 4 single coil pickups arranged as two pairs in humbucking configuration. In addition to a normal 3‑way pickup selector switch, the H2 has two additional buttons that ‘split’ the humbucking pickup pairs to give a wide range of tonal options including genuine single coil sounds (unlike most tapped or split humbuckers). When it arrived, one of the 4 pickups wasn’t working and it had to be sent to a pickup expert to fix. Thankfully, it was a weak connection between the coil and pickup lead, so easily sorted. Like the earlier Bullet, the H2 has a very nice standard Telecaster neck. The diverse sounds available from this guitar are nothing short of remarkable and it makes me wonder why this particular unique configuration hasn’t been widely used since. The early USA‑made Bullets were misunderstood and tend to attract a lot of unfair criticism from purists. As a result, like the Fender Leads of the time, they weren’t manufactured for long. Judging it on its own terms, this is really not the cheap Stratocaster imitation it may seem at first glance. I realised that the Fender Bullet H2s are both cool and quite rare, so fit the CRAVE criteria. I never envisaged that it would be so fascinating and collectable while still being affordable. This Bullet H2 came with its original (if battered and stickered) Original Hard Shell Case (OHSC).

1975 Fender Starcaster

The Fender Starcaster (and, no, that isn’t a spelling error) has been a long‑standing ‘wanted’ guitar, ever since I got a 1960s Coronado. There is very little similarity between the two models but as there are very few semi‑acoustic electrics in the brand’s history, I was once again curious. Unusually, I bought this one from a retailer, so I probably paid more than I normally would have considered but it was worth it. Where the Coronado is fully hollow, the Starcaster has a solid centre block running under the pickups and the massive hardtail bridge/tailpiece assembly. Surprisingly, the Starcaster has through‑body stringing like a Telecaster. While the Coronado has DeArmond single coil pickups, the Starcaster uses the sublime Seth Lover ‘wide range’ humbuckers as used on several Telecaster variants from the 1970s. While both the Coronado and the Starcaster use bolt on maple necks, they are, again, very different and the latter is unique to the model with a maple fingerboard. Both the Coronado and Starcaster were reissued by Fender in 2013 although neither are a patch on the originals. The vintage Starcasters are instantly recognisable because of the distinctive bridge assembly and the 5 controls (2 volume, 2 tone plus master volume). When going over the guitar on arrival, I found it was a rare very early 1975 (pre‑production?) model. It has been well used but is still in remarkably good condition with the sort of genuine patina that only age can bestow. The tobacco sunburst and sunburst flame maple is just gorgeous. It is also a fantastic guitar to play with a great neck and I really like the (in‑vogue) offset body shape. Even better, it doesn’t play or sound like any other Fender, ever made. The Starcaster didn’t prove popular on its original release and wasn’t produced for long before being quietly discontinued in 1982. I can understand why it didn’t sell in large numbers but that misses the point about its exclusive charms. Make no mistake, the Starcaster is a high quality instrument just waiting to be rediscovered. This beauty is not to be confused with cheapo far‑eastern Strat imitations from the 2000s that unfortunately carried the ‘Starcaster by Fender’ moniker. The case, while vintage, is not an original Fender Starcaster case. Obtaining a Fender Starcaster was a long‑standing aspiration achieved, which can now be removed from the ‘wanted’ list. These babies are now becoming extortionately expensive on the vintage market, as the ‘collectorati’ are now cottoning onto them. Seems I got this one just about in time‑ish.

1979 Fender Stratocaster Anniversary

I already have a 1977 Stratocaster hardtail and I was kinda looking around for one from the early 1970s with a vibrato before they become unaffordable (rapidly heading that way now). Along the way, I became distracted by the 1979 Anniversary Stratocaster. I missed out on a couple before I finally attained one (once again at a higher price than I intended, unfortunately). The Anniversary is distinctive in that it was Fender’s first foray into limited edition commemorative models, celebrating 25 years since the original Stratocaster’s introduction in 1954. I was attracted by the classic look of silver, black and maple fingerboard. Whether one can regard a massive 10,000 examples as a ‘limited edition’ is debatable. It also comes with a very unsubtle ‘Anniversary’ logo emblazoned on the bass horn plus a much more understated 25th anniversary neck plate which carries its serial/issue number. This one comes with its original certificate of authenticity and most (but not quite all) of its case candy, as well as its ABS OHSC, all of which is nice to have. Like all Anniversary models, this one is heavy at 10lbs (4.6kgs) but I can live with that because of the part this model plays in electric guitar heritage. It looks cool, sounds great and plays very nicely, although the action is a little high. Fundamentally, though, it is essentially a standard Stratocaster with a few aesthetic embellishments. This guitar is in excellent, almost mint condition, which suggests that it was kept as a memento rather than an instrument to be played, which in my view is sacrilege. These aren’t especially rare instruments and many purists would say they aren’t cool. Well, I’m going to stand my ground and say that I like it, which is why it now has a safe home here at CRAVE Guitars.

1983 Fender Stratocaster Elite

This is the first of a pair of Fender Elites that I bought in 2019 (and the second Stratocaster!), both of which I think are quite desirable. As background, the Elite series was only produced in 1982 and 1983 before it was withdrawn shortly before CBS sold Fender in 1984. It is the innovative electronics that really set the Elites apart. The signal chain starts with 3 ‘noiseless’ single coil pickups including an additional dummy coil to reduce hum. These pickups are distinguishable by the Fender logo covers with no visible pole pieces. Instead of a 5‑way pickup selector switch, there are 3 on/off buttons, 1 for each pickup, giving 8 permutations in all (including all ‘off’). This arrangement provides easy access to more sounds than the standard Stratocaster of the time. The switching is unusual but also very intuitive (far better than Fender’s current S‑1 switching). The signal then passes through an on‑board active pre‑amp powered by a 9V battery. The controls are different too and not just the nice soft‑touch logo knobs. There is the usual single master volume complemented by two master tone controls, comprising Fender’s propriety MDX (MiD‑range eXpander) boost and TBX (Treble/Bass eXpander) circuit. The Strat’s iconic jack plate is also absent, with the output moved to the body edge. The bridge assembly is also unique, here it is a top‑loading hardtail Fender Freeflyte bridge. In use, it plays just like a Strat, although it is a touch on the heavy side. The sounds though are, as you might expect, quite different from a normal Stratocaster. Before the purists clamour with cries of sacrilegious iconoclasm, the electronics went on, albeit modified, to be used in both the Eric Clapton and Buddy Guy signature guitars, so the Elite wasn’t an abortive experiment. This example looks particularly cool in creamy Olympic White with a lovely rosewood fingerboard. This Elite is in lovely all‑original excellent condition and comes with its ABS OHSC. Like many 1970s and 1980s Fenders, these are now becoming more desirable on the vintage market. These original Elites are not to be confused with the similarly named but otherwise standard Elite series instruments issued by Fender between 2016 and 2019.

1983 Fender Telecaster Elite

More?! OK then. Onto the second in the pair of Fender Elites. This one is a 1983 Telecaster Elite in lovely translucent Sienna Burst with a gorgeous rosewood fingerboard. Like the Stratocaster Elite, it is a fascinating variant on the classic design. The electronics here comprise dual‑coil noise‑cancelling Alnico 2 pickups routed through an on‑board active 9V preamp with 2 volume controls allied to the same MDX (mid‑range) and TBX (high‑range) tone controls as found on the Stratocaster Elite. Like its sister model, it has the unique top‑loading hardtail Fender Freeflyte bridge. The body has cool single binding on the top edge, similar to the original Custom Telecaster from the 1960s. For some inexplicable reason, the designers at Fender felt that a Telecaster would look good with a Les Paul‑like scratchplate. They were wrong, it doesn’t. Fortunately, the scratchplate was provided in the case, rather than being attached and even then, it could be stuck on with double‑sided tape. Personally, I prefer it without the scratchplate, revealing the woodgrain through the finish. Like the Stratocaster, the Telecaster is a touch on the heavy side but I can forgive that because of its unique position within the Fender canon. This little beauty is in near mint condition and includes its OHSC. The Elite is far from your average Telecaster and, on my unending quest for something cool and rare, it has found a good home here at CRAVE Guitars. Both Elite models (and there was also a Precision bass in the range as well) are harder to come across than standard models, so the prices tend to reflect their relative scarcity. The Elites are unequivocally ‘curio’ guitars from the last dying days of Fender’s notorious CBS era, so they tend to be frowned upon by purists, which makes them all the more appealing to the maverick side of my enduring addiction to the quirky and idiosyncratic guitars from a generally unloved period of guitar history.

1947 Gibson ES-150

Thus, we move onto the ‘Big G’. The author sadly hit one of those dreaded ‘big birthdays’ in 2019 and without much else to celebrate, I figured that I would mark my passing years with something self‑indulgent. I had been keeping my eyes peeled for a vintage Gibson ES‑150 for several years and watching as the prices escalated to, frankly, silly levels. I couldn’t afford one of the carved top pre‑war models with the Charlie Christian pickup, so I was looking around for a newer model, which would be cheaper. For those that may not know, the Gibson ES‑150 was introduced in 1936 and is acknowledged as the first commercially successful electric Spanish guitar. I eventually found a lovely 1947 ES‑150 from the first year of post‑war production and sporting a single P90 pickup. This one was way, way more expensive than I could normally justify so, because of my impending mortality, I was tempted to go for it. In fact, it is the most I’ve ever spent on a single instrument to‑date. This ES‑150 was residing in Italy, so I imported it before Brexit shuts down all opportunities to access vintage fare from our European colleagues. Owning a really old hollow body non‑cutaway jazz guitar is new territory for me, so it was with some trepidation and excitement that I was delving into this particular art form. The guitar itself is in fine all‑original condition with just surface crazing to the lovely sunburst nitrocellulose finish. There is no serial number or Factory Order Number (FON) which, along with the features, dates it to 1947. Playing it is a different experience altogether, as it needs heavy semi‑flat wound strings to get the laminated top vibrating. Then there is the limited upper fret access to contend with, so it takes some time to acclimatise to the technique. Being deep‑bodied and fully hollow, this one actually works quite well as an acoustic jazz guitar too. As you may know, I really like single pickup guitars, so there is less to get in the way of pure P90 tone. The ES‑150 is currently a bit of an outlier within the CRAVE Guitars family. One thing is for sure, it isn’t going anywhere anytime soon. Definitely not the ideal guitar of choice for metal heads though.

1965 Gibson Melody Maker

This 1965 Melody Maker was a bit of a gap filling exercise. Between 1959 and 1971, Gibson released four versions of their ‘student’ guitar, the Melody Maker. The first was a single cutaway Les Paul shape (1959‑1961), the second was a unique and really cute double cutaway model (1961‑1965), the third iteration was a somewhat crude and short‑lived double cutaway model (1965‑1966) and the final generation was SG‑shaped (1967‑1971). This is one of the rather ‘ugly duckling’ models from 1965 (weirdly often called the ‘type 2’, even though it’s the third body shape), which completes the set. The Melody Maker comprises a slab mahogany body with double cutaways, a set mahogany neck with the typical narrow headstock, one single coil pickup, and comes in a reserved cherry nitrocellulose finish. Unsurprisingly, this model has never been reissued by Gibson, although there has been a Joan Jett signature guitar. The Melody Maker name has re‑appeared a number of times since the 1960s. This example is not in pristine shape but is all‑original and it comes with its OHSC. At least this one hasn’t been butchered over the years unlike many. I was shocked that a recent guitar magazine article (which I won’t name but they really should know better) was recommending that the vintage Melody Maker body should be routed and the pickup replaced with a P90 or humbucker! Unbelievable and indefensible! I think that the narrow single coil pickups give the Melody Maker a distinct tone, which is very underrated by purists. Melody Makers are unique in the Gibson history books and unmolested examples deserve much more credit in my view. They are made from the same materials in the same Kalamazoo factory by the same people as other highly prized models and should be regarded (and treated) as worthy vintage instruments in their own right. They are very light and resonant, making them really easy to pick up and play. Compared to many Gibsons from the 1960s, Melody Makers are still relatively affordable on the vintage market and represent a good starting point for people interested in collecting vintage guitars from a major American brand. Personally, I have to admit that I am not a huge fan of this pointy body shape but now that I own one, it is growing on me.

1989 PRS Classic Electric

Having dipped my toes into the world of Paul Reed Smith (PRS) guitars with an elegant 1988 PRS Standard, I was looking around for other early hand‑finished guitars that were made in PRS’s original facility in Annapolis, Maryland. These early, so‑called ‘pre‑factory’ models are becoming increasingly collectable, especially as they are now beginning to get to vintage age (and price!). The early PRS Customs are becoming incredibly expensive, so my eyes settled on an early PRS model that was initially called the Classic Electric when introduced in 1989. The model was swiftly renamed as the CE after a legal dispute with Peavey over the original name. NB. The CE is not to be confused with the far Eastern PRS SE (‘Student Edition’) guitars. I also had my sights set on the early solid Electric Blue metallic finish, which I think is stunningly beautiful. This example is a very early Classic Electric, being only the 473rd guitar off the production line, distinguished by its 24‑fret, bolt‑on maple neck and the plain headstock carrying the block ‘PRS Electric’ logo (soon to change to the familiar modern ‘Paul Reed Smith’ signature script logo). There are quite a few marks including one significant ding to the body and the finish on the back of the neck has worn down. The wear indicates that it has been well played, which is often a sign of a soundly put together instrument. OK, it doesn’t have the flashy flame or quilted maple cap, faux binding, bird inlays or set neck but it is still a very creditable guitar that plays very well and sounds great. The CE is one of those under‑the‑radar PRSs that the collectors tend to overlook, although genuine owners praise them very highly. PRS finally got around to re‑releasing the bolt‑on CE model in 2016 but the new ones really aren’t the same as these early ‘handmade’ examples. Despite the wear and tear, it is all‑original and comes with its OHSC but no case candy. You can’t have everything. A vintage PRS Custom to add to the Standard and Classic Electric sadly has to remain on the wish list for the time being.

1959 Silvertone 1304

I had a bit of a mad spell towards the end of the year when I was buying several guitars for the sake of it. I was looking for a vintage Danelectro and came across this funky little 1959 Silvertone 1304 with its single cutaway and dowdy brown finish. It is very similar to the Danelectro U1 (differentiated by pickup position and headstock logo), which is no surprise seeing that Danelectro manufactured Silvertone guitars for the Sears & Roebuck retail and mail order company at the time. The 1304 is actually a pretty rare model being only available in Sears & Roebuck’s ‘Wish Book’ Christmas catalogue and related advertising of 1958, 1959 and 1960. The neck and familiar ‘coke bottle’ headstock is also rare, being finished in natural, rather than colour matched to the body, apparently due to supply shortages at the time. It also has the circular electrics cover on the back and the squared off neck joint that confirms its age and lineage. The ever present Lipstick pickup and body‑edge tape will be familiar to Danelectro fans. It also feels, plays and sounds just like you’d expect a vintage Danelectro from the 1950s, i.e. great. This was the last of the Danelectro single cutaway body shapes before they moved to double cutaways in the 1960s. The single pickup and simple controls let you focus on playing and getting the most out of a very cool and groovy (and lightweight due to semi acoustic construction) instrument. It is a lot of fun to pick up and play and hard to put down. The action is a little high but that resistance actually forces one to play differently compared to a more ‘refined’ guitar. Like others in this résumé, it is in fine all‑original condition, although it sadly doesn’t come with an original 1950s case. These cool Silvertone and comparable Danelectro guitars are still amazingly affordable for vintage guitars from the so‑called ‘golden era’, perhaps because they were (generally) made in large numbers and sold to a largely undiscriminating ‘student’ audience at the time.

2019 CRAVE Amps? What Amps?

Right, that’s the 2019 guitars covered, so what else was new? Well CRAVE Amplifiers didn’t achieve anything at all in 2019 – no new additions and no losses. Nada. As it turned out, I was quite happy running two relatively similar modest little units as daily go‑to amplification during the year, a 1978 Fender Champ and a 1978 Fender Vibro Champ both in ‘silverface’ livery. Don’t underestimate these diminutive 5W Class A valve amps, they are really great for what they are. I acknowledge that I’m not a vintage amp specialist, so they are not hugely abundant here at CRAVE Guitars. Owning vintage valve amps demands space, time and effort as well as oodles of filthy lucre, so I’m not in a huge rush to buy up large numbers of vintage amps.

An Introduction to the 2019 CRAVE Effects

CRAVE Effects did a little better during 2019, although there were only five new pedals to join the clan. Having said that, two of those were outstanding examples of the type. As with amps, because I am not a vintage effect expert, I’m sticking to a few well‑known global brands from the 1960s to 1980s, rather than go too far into the realms of the unique, idiosyncratic and unusual.

1987 BOSS RV-2 Digital Reverb

It may seem heretical to many but this is the first vintage digital effect to join the CRAVE club. This Japanese BOSS RV‑2 was sought out principally because there are few vintage compact analogue reverb pedals out there. Yes there are the bulky (and expensive) vintage valve reverb tanks from the likes of Fender but I wanted something small and convenient to add an extra special dimension to the aforementioned Fender Champs, neither of which have on‑board reverb. So, a digital reverb was the way to go with this rather plain looking but flexible 1987 BOSS RV‑2. It provides a range of reverbs and it sounds quite natural without too many sibilant digital artefacts, although not quite the soft and cuddly warm tones of traditional analogue reverbs. Still, it does its job very well and it is from the right era (pre‑1990s), which is why it’s here. Interestingly, the high current draw of the digital circuitry in the RV‑2 means that it cannot be powered by batteries and requires a BOSS PSA power supply in order to do its ‘0’ and ‘1’ digi‑thing.

1969 Dallas Arbiter Fuzz Face

This is the first of two iconic classic pedals acquired in 2019. The humble but fabled English Dallas Arbiter Fuzz Face rose to stardom mainly because of none other than Jimi Hendrix. This isn’t one of the earliest Fuzz Faces that used germanium transistors but one of the first to use silicon transistors, this one dating from c.1969. It is amazing what a few cheap electronic components can end up being turned into. Truth be told, I didn’t actually intend to get this pedal. It came along via an eBay auction and I decided to take a punt and put on a (relatively) low bid and… what happened? No‑one came along at the last minute to beat me and I ended up getting it. Yikes! Yes, it was hideously expensive but not as bad as it could have been. Therefore, while it was not exactly a bargain, I suppose it was still a reasonable price for what it is. Fortunately, it delivers its fuzzy glory in all the right ways, so that’s OK then. It is in excellent all‑original condition and in perfect working order, so my initial reticence was soon overcome. It actually looks pretty cool in red too. By today’s standards, its circular form factor does take up a disproportionate amount of pedalboard real estate but, c’mon, it is a vintage fuzz pedal – what’s not to like? The original Fuzz Face was definitely a batteries only zone back in the 1960s and neither is there an LED status light to indicate when it’s on. Great though it undoubtedly is, this is clearly not one of those pedals you’d want to gig with down the local pub, that’s for sure.

1982 Ibanez PT9 Phaser

At totally the other end of the value scale from the Fuzz Face, we have a fairly widely available and averagely collectable 1982 Ibanez PT9 Phaser. CRAVE Effects has somehow accumulated more phasers than any other kind over the years and that’s probably because the late 1970s and early 1980s experienced a surfeit of these simple analogue modulation effects. Let’s be honest, your average phaser really isn’t the most exciting of guitar effects compared to what else is out there, especially in these days of ubiquitous boutique eccentricities. The PT9 is pretty utilitarian and sounds OK, but not necessarily exceptional, which is probably to damn it with faint praise. I’m guessing that Ibanez chose to change their colour scheme from the previous blue/white PT‑909 Phase Tone to the orange/black PT9 in order to compete on looks with the all‑dominating and very orange MXR Phase 90 of the time. I had been on the track of a PT9 to fill a gap in the collection for a while, so the gap was duly filled. Original PT9s are still relatively affordable phasers and they are, perhaps, a good entry point for neophytes to get into vintage effects before getting into more exclusive and expensive fare. Time to move on… Next!

1981 Ibanez TS-808 Tube Screamer Overdrive Pro

… and here is the second iconic classic pedal procured in 2019. The otherwise ordinary green Ibanez TS-808 Tube Screamer Overdrive Pro rose to hallowed status via another guitarist association, this time with the inimitable Stevie Ray Vaughan. Like the Fuzz Face, the original vintage TS‑808s are now inordinately expensive on the vintage effect market, with prices increasing all the time. This was one of those times when I felt a ‘now or never’ moment and bagged a reasonably good one dating from 1981 at just below average price. At this point, I’m going to proclaim ‘emperor’s new clothes’ and say that, while it is undoubtedly a very competent pedal, does it really deserve the unchallenged accolades above all the other competent overdrive pedals out there? Just why we guitarists spend thousands of pounds/dollars on vintage instruments and vintage valve amps and then rely on some dirt cheap solid state components to make them sound ‘better’ is beyond me. To some extent, the same goes for the Fuzz Face but at least that is a down ‘n’ dirty fuzz pedal! I understand all the well‑rehearsed arguments about compensating mid‑boost and clean low gain drive into the front end of an already cooking valve amp. Perhaps I’m missing something else obvious but I really don’t think so. I also know that it goes against the grain to defer from perceived wisdom and to test the TS‑808’s seemingly unassailable reputation. Don’t get me wrong, I’m not knocking the Tube Screamer and what it does. I just believe it is somewhat overrated for the crazy market prices being asked. Anyhow, one of the green meanies is here now and is part of the growing ranks alongside other Ibanez ‘0’ and ‘9’ series pedals. At least I no longer have to keep scanning the market endlessly for a good one at a reasonable price.

1980 MXR Micro Amp

… and right back to the other end of the value scale again with a humble 1980 MXR Micro Amp. Essentially, all a boost pedal does is to increase the signal level hitting the front end of a (valve) pre‑amp, therefore not only adding a bit of volume, but also hopefully some natural compression and a bit of smooth distortion without affecting the underlying tone. Once again, there is something of a question mark about relying on a few cheap bits of electronics to make vintage gear ‘sing’. Having said that, the Micro Amp does its job perfectly well and it can be a really useful tool in the right circumstances. However, let us be clear that it is not exactly the most exhilarating or far out stomp box out there. As an idle observation, it is funny how things come round again given long enough. Outboard pre‑amp pedals are now a ‘big thing’ in the 2020s, albeit a bit more complex than this little MXR. There are many modern‑day compact pedal pre‑amps out there, including the Hudson Electronics Broadcast, Catalinbread Epoch Pre and Fredric Effects 150 Preamp. At least the unassuming little white MXR Micro Amp doesn’t take up much pedalboard space and is oh‑so simple in operation with only a single ‘Gain’ control. Like most un‑modified MXR pedals back in 1980, the Micro Amp only eats batteries for breakfast and doesn’t come with either an LED status light or DC input.

Help Needed

Vintage guitars, effects and amps need attention from time to time to keep them working at their best. While I can undertake basic maintenance, set ups and general TLC, I know that my skills are finite. I am looking for a guitar tech or luthier who can, from time to time, take on a vintage guitar and do some sympathetic remedial work, whether it involves fretwork, electrics, repairs or whatever. I’m also looking for someone who can do occasional work on effects and amps, which is basically electronics, switches, leads, soldering, etc. With over 60 vintage guitars, more than 50 vintage effects and 6 vintage amps, I need some expert help every so often. If there is someone out there with the requisite skillset for any or all of the above, and who is local to SE Cornwall in the UK, I would be interested in making a connection. Anyone interested? Please contact me at the e-mail address at the bottom of every page on the website.

Tailpiece

Actually, I think this is a good place to pause, so I’ll stop there for now. Nine guitars and five effect pedals is enough for one month.

At this point, I must stress that I did not buy any of these items as a pecuniary investment – anyone familiar with CRAVE Guitars will know that is not my motivation. However, given that savings accounts in the UK are currently offering just 0.01% interest rate, I would prefer to be broke and have great vintage guitars, amps and effects to play with and look at. The last recession that began in 2008 apparently saw 30% wiped off the value of vintage guitars, albeit temporarily. To me, it’s still a no brainer, when funds become available, eBay here I come for some vintage gear hunting. The other thing I would add is that all of the new additions are consistent with CRAVE Guitars larger strategic grand plan to conserve ‘Cool & Rare American Vintage Electric’ guitars, amps and effects as important musical and cultural heritage. Oh, and it’s also an unhealthy obsessive addiction as well but I guess you’ve sussed that out already.

At the top of this article I mentioned that there are three themes to work through and I’ve only covered one of them. I am conscious that the ‘History of Modern Music…’ series resulted in lengthy articles and this is, compared to them, quite short. I’m also a bit fatigued by the demands of lengthy researching and writing exercises. Thus, I’ll leave the rest for future article(s). I reckon that it is best to keep these reflective articles relatively consumable. Besides, there really is no rush, is there? Are we going anywhere, anytime soon? No, I thought not.

Believe me, there is still plenty of stuff to be getting on with here at CRAVE Guitars, so I guess I’ll be getting on with stuff then. Who knows what the world will be like in the coming months. Despite the continuing stresses and challenges of COVID‑19 et al, I hope that you’ll return here in due course for your prescribed diet of diversionary diatribes. Stay home, stay safe and stay (in)sane. Remember this simple but important mantra while civilisation unravels around us, Peace, Love & Guitar Music. Until next time…

CRAVE Guitars’ ‘Quote of the Month’: “I can see where this is going because I’ve been where it went.”

© 2020 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

August 2018 – A Potted History of the Guitar Part VI

Hello again, guitar history fans and welcome to August 2018’s article in the series on the history of the guitar. There is no point in beating about the bush, it’s time to dive right back in where we left off last month with the birth, and now – to extend the analogy – the growth of the electric guitar from early years to adolescent hood.

If you wish to recap on previous articles before starting here, the ‘Potted History of the Guitar’ series, can be accessed here (each part opens in a new browser tab):

The Modern Solid Body Electric Guitar

This part of the guitar’s story covers the period of fundamental and rapid innovation as well as pragmatic entrepreneurialism that starts around the late 1940s and early 1950s, a period of intense creativity that would come to define the modern electric guitar. Once the essential foundations were laid by Rickenbacker, Gibson and a few others, the popularity of the guitar was about to explode.

Since the time of the guitar ‘big bang’, instruments would continue to be improved and refined; an incremental process that continues unabated up to the current day. However, nothing like the level of creativity that heralded the ‘dawn’ of the electric guitar era. It was the start of a so‑called ‘golden era’ that would last about 15 years.

While acoustic guitars continued to develop after the 1930s, they were just about as loud as they were going to get without some form of amplification. Electric archtop and early solid body electric guitars had started the ball rolling during the first half of the 1930s and guitarists were buying into the increasing trend for electric guitars of one sort or another.

While not alone in influencing guitar development, today’s ‘big two’ companies – Fender and Gibson – have between them, been responsible for, or at last instrumental (sic!) in, many of the major innovations and landmark electric guitars since the 1950s. Therefore, the focus here is predominantly, but not exclusively, on the contribution from these two major manufacturers.  Much credit though is due to the vast number of other guitar builders – way too many to mention them all by name – that have played their part in developing the musical landscape over the decades, and which we enjoy today. Without their competition to keep the ‘big two’ on their toes, the quality and price equation might have gone too far in opposite directions. Thankfully, there is no monopoly in the guitar market – far from it in fact – and that fact, as it turns out, is a very good thing for musicians all over the world.

However, before the story moves on to Fender and then Gibson, we need to take a short diversion before getting back on track…

Bigsby Guitars

No history of the formation of the electric guitar would be complete without some mention of Paul Adelburt Bigsby (1899-1968). P.A. Bigsby was a motorcycle racer, inventor, designer and builder based in California. Bigsby has often been quoted as saying confidently, “I can build anything”.

Historically, Bigsby might be better known for his iconic Bigsby vibrato systems. Less well known is that Bigsby was also responsible for pioneering solid body electric guitars as well as for revolutionising pedal steel guitars.

Bigsby collaborated with lap steel guitarist Earl ‘Joaquin’ Murphey (1923-1999) of Spade Cooley’s orchestra in the 1940s. Murphey helped to persuade Bigsby to start making guitars in the first place, in around 1946/1947. Bigsby built Murphey several steel guitars by 1947, with two or three necks. Murphey’s successor in Cooley’s band, another steel guitarist called Speedy West (1924-2003), not wishing to be outdone, also commissioned Bigsby to build him a custom pedal steel guitar in 1948.

Around the same time, successful country and western artist and good friend, Merle Travis (1917-1983) asked Bigsby to fix a wayward vibrato on his Gibson L-10 guitar. Bigsby subsequently went on to build a complete solid body electric guitar for Travis, based on a sketch Travis had made. Travis’s Bigsby guitar attracted a lot of attention and other artists queued up for Bigsby to make further custom guitars, including for acclaimed session guitarist with the ‘Nashville A-Team’, Grady Martin (1921‑2001).

Bigsby’s guitar designs not only seem familiar, but also seem well ahead of their time for 1948, especially when compared to anything else on the market. The Bigsby Merle Travis guitar has a single cutaway body not dissimilar to Gibson’s Les Paul models and a neck/headstock outline that bears a notable resemblance to Fender’s Stratocaster. Bigsby’s design predated both the Les Paul (1952) and the Stratocaster (1954) by several years. Many have contended that Gibson and Fender plagiarised, rather than simply being influenced by, Bigsby’s original designs. Hindsight provides the opportunity to speculate but the truth is shrouded in idle debate and misinformation.

Partly because he wanted to make most of the parts himself, Bigsby only produced a very small number of finished custom‑built instruments up until 1956, where after he concentrated on the vibrato business. However, as his guitars never entered full production, his legacy consists of a few unique examples of his craftsmanship. Unfortunately, Bigsby kept no records of his creations. The company he founded undertook extensive research and can document 47 steel guitars and only 6 standard guitars, along with a few other custom instruments surviving to the current day. Others may yet come to light at some point to be authenticated.

Bigsby’s name is now synonymous with his ubiquitous vibrato tailpieces, which have adorned countless guitars since the 1950s. Bigsby sensibly filed a patent for his ‘tailpiece vibrato’ in November 1952, which was granted by the U.S. Patent Office in March 1953. The rest, as ‘they’ say, is history.

When his health started to fail, Bigsby sold his company to retired Gibson president Ted McCarty in 1966. Paul Bigsby died 2 years later in 1968 at the age of 68. Subsequently, Gretsch bought the Bigsby enterprise from McCarty in 1999. Bigsby Guitars is now making limited edition guitars under the patronage of Gretsch.

Many of those aware of Bigsby’s pioneering work feel that he should be given greater credit for his contribution to guitar history. One might only wonder at the course of modern guitar history had Bigsby capitalised on his creative designs. Bigsby may have been first in a lot of areas but it was other companies that catered for the market and it is the commercial success brought about by mass production which is where the story then continues.

Fender Solid Body Electric Guitars

Clarence Leonidas ‘Leo’ Fender (1909-1991) was an electrical engineer by trade. He started out in business as Fender Radio Service in 1938, repairing radios, phonographs and valve amplifiers. Recognising the growing demand for his skills from the music industry, Fender looked to use his growing expertise in that area. Along with business partner and former Rickenbacker employee Clayton ‘Doc’ Kauffman, Fender co‑founded the short‑lived K&F Manufacturing Corp in 1945. K&F’s intention was to manufacture musical instruments and amplifiers, including lap steel guitars that were particularly popular at the time.

By 1946, Fender had parted ways with Kauffman and established the Fender Electric Instrument Manufacturing Company, based in Fullerton, California. The company, known to most simply as Fender, has become one of the pre‑eminent and most widely recognised manufacturers of electric guitars, basses and amplifiers in the world. Historically, Fender is particularly important because of its ground breaking role in making electric instruments and amps accessible to mass markets eager for the new‑fangled technology in the 1950s.

Leo Fender’s vision had less to do with building small numbers of bespoke instruments and more to do with commercial large‑scale manufacture of instruments using tried and tested production methods. Fender wanted the electric guitar to be straightforward to manufacture as well as easy to service and maintain. Leo Fender asked George William Fullerton (1923-2009) to join the company in 1948. Fullerton’s appointment was important, as he would become a long‑term business associate not only at Fender but also in subsequent post‑Fender enterprises, including Music Man and G&L (an acronym standing for George & Leo).

Even though Fender had introduced amplifiers in 1947, Fender’s business began focusing on guitar designs and in c.1949 the company started making prototypes of what would eventually become the iconic Telecaster. The early prototypes used a body largely designed by George Fullerton. The first prototype exhibited a 3‑a‑side lap steel‑style headstock, while the second attempt looked more Fender‑like. Both prototype headstock designs bore a similarity to those seen on Bigsby’s guitars.

Fender offered the first mass-produced Spanish-style solid-body electric guitar to the public in 1950. The initial few guitars were single pickup models called the Esquire, although confusingly, a small number of Esquires were also ordered with two pickups.

The production dual pickup model was originally named the Broadcaster until Gretsch objected to the use of the name, as they had produced drums using the Broadkaster name since the 1920s. Fender complied and for a short period between February and August of 1951, the guitar appeared with no name on the headstock, leading to the popular nickname ‘Nocaster’ to describe its curious temporary anonymity.

Fender filed a patent for the Telecaster design in April 1951, which was awarded quite quickly by the U.S. Patent Office in August 1951. The familiar twin pickup single cutaway guitar, now formally named the Telecaster was made available to the public from mid‑1951 and has, remarkably, remained in continuous production ever since.

Although instantly recognisable nowadays, the Telecaster was unlike anything that had come before. The way they were put together was revolutionary; using a modular construction comprising a single cutaway slab body of solid ash wood and a removable maple neck secured by four screws on the back of the body. The simple and sturdy design proved not only resilient but also efficient and relatively cheap to manufacture using established assembly line techniques of the time.

While there have been many variants of the Telecaster over the years, including the Custom, Deluxe, Thinline and Elite, the original fundamental design elements have remained largely unchanged over many decades.

Not content with the success of the Telecaster, Fender and this team went on to design and market the enormously popular Stratocaster in 1954. Unlike the Telecaster, the Stratocaster employed a futuristic double cutaway ash body with deep rib and forearm contours for player comfort, 3 single coil pickups and a clever floating vibrato system. Fender retained the bolt‑on maple neck, albeit with a shapelier headstock than the Telecaster and eerily reminiscent of Bigsby’s earlier design. Fender filed a patent application for the Stratocaster’s ‘tremolo’ (a misnomer – it is actually a vibrato) design in August 1954, which was subsequently awarded in April 1956. The Stratocaster, like the Telecaster before it, became phenomenally successful with consumers and has been in continuous production since its launch.

Just as revolutionary for bass players, Fender also pioneered the commercially successful electric solid-body bass guitar. The Precision bass first appeared shortly after the Telecaster in 1952 and before the Stratocaster. Before the Precision, bass players had to contend with cumbersome acoustic, hollow body, fretless upright basses. The Precision was an ergonomic godsend, especially for travelling musicians. Like a guitar, the Precision featured a fretted neck making the instrument much more accessible to neophytes wanting to jump on the bandwagon of popular electric guitar music in the 1950s and 1960s. The 34”‑scale fretted neck gave practical credence to the new bass’s name – Precision. Fender filed a patent for the bass guitar in November 1952, which was awarded in March 1953.

Initially, the Precision took many design cues from the Telecaster before updates in 1954 and 1957 gave it the now‑familiar characteristics more akin to the Stratocaster. Not resting on their laurels, Fender followed up the hugely successful Precision with the twin‑pickup offset Jazz bass in 1960.

These four models – Telecaster, Stratocaster, Precision and Jazz – represented the enduring ‘core’ models around which Fender experimented with other designs. It is very unusual in industrial design history to ‘get it right’ first time and then for those products to remain relevant for over six decades (… so far, and counting). However, Fender seemed to have achieved just that. Fender, however, not content to stand still, kept innovating.

In the late 1950s and early 1960s, Fender also introduced two luxury contoured offset‑waist body models; the 25½”‑scale Jazzmaster in 1958 and the shorter 24”‑scale Jaguar in 1962. Both models used entirely new single coil pickups and both had separate, complex ‘rhythm’ and ‘lead’ circuits. The controls were not intuitive, which put off some players. The high‑price of the Jazzmaster and Jaguar may also have deterred customers and both models failed to attract the intended target audience – traditional jazz guitarists wedded to the competition’s archtop designs. However, both the Jazzmaster and Jaguar gained a significant boost from an unexpected source. Popular west coasts surf musicians including The Beach Boys and The Ventures adopted the new offsets and gave them some legitimacy. Ultimately though, poor sales led to Fender discontinuing the Jaguar in 1975 and the Jazzmaster in 1980. Wisely, Fender has subsequently successfully reissued both models for newer generations to discover.

One of the key success factors for Fender was the introduction of custom colour options in addition to the limited standard blonde and sunburst finishes. Custom colours were based on popular automobile paints made by DuPont during the American car craze of the 1950s. Customers could custom order new guitars from a range of exciting colour finishes for an additional 5% upcharge. Fender was also open to accepting standard colour guitars for factory refinishing in the custom colours. Popular names for the custom colours included Olympic White, Lake Placid Blue, Daphne Blue, Sonic Blue, Shoreline Gold, Burgundy Mist, Sherwood Green, Surf Green, Foam Green, Fiesta Red, Dakota Red, Candy Apple Red, and Shell Pink. Early models with genuine custom colours are relatively rare and have since become highly desirable with vintage guitar collectors; some guitars fetching a hefty premium on the vintage market compared to the standard colours. Many of those original custom colours phased out by 1969 to 1972 have now become very popular again as standard colours in the 21st Century.

Strategically, Fender tried to cover all bases by also introducing a range of short-scale (initially 22½” and then 24”) ‘student’ models including the Musicmaster (1956), Duo‑Sonic (1964), Mustang (1964) and Bronco (1967). To differentiate the ‘student’ instruments from the pro‑level models, Fender designed hardware and finishes that was unique to these models. The Musicmaster and Bronco had single pickups, while the Duo‑Sonic and Mustang had two pickups. The Mustang and Bronco also featured bespoke vibrato systems while the Musicmaster and Duo‑Sonic had fixed bridges. While these budget models have found a strong following by those in the know, they have had chequered histories, all having been discontinued and reissued over the years. Seen as peripheral to the ‘core’ classics, the high volume low cost guitars undeservedly attract a lower profile and lower resale values on the vintage collector market despite being made at the same factory, by the same staff, using the same materials and tools.

In the minds of most guitarists, Fender was a solid‑body guitar maker. After the failure of the Jazzmaster and Jaguar to persuade traditionalists to change brand, Fender attempted to compete with Gibson’s popular ES range of semi‑acoustic guitars. Fender introduced the fully hollow‑body Coronado in 1966, designed by German luthier and Rickenbacker guitar designer Roger Rossmeisl. The Coronado retained Fender’s ‘bolt‑on’ maple necks with six‑a‑side headstocks, although the pickups used were unusually DeArmond single coil models. Unfortunately for Fender, the ill‑fated Coronado proved a commercial failure and was discontinued in 1972. After a short‑lived venture into archtop jazz guitars with the rare Montego and LTD models between 1968 and 1972, Fender tried again in1976 with the introduction of the upmarket semi‑hollow humbucker‑equipped Starcaster. Like the valiant attempts before it, the Starcaster met with the same consumer resistance and proved equally unsuccessful, resulting in it being summarily discontinued in 1982. Notably, both the Coronado and Starcaster models were reissued by Fender in 2013 and continue in production today.

There have been many other Fender solid body electric guitars over the years including the Bass V & VI, the Electric XII, Bullet and Lead amongst numerous others.  In addition, there were many variations on a theme, for instance the Coronado came in Antigua, Wildwood, XII and bass versions. Similarly, the Musicmaster and Mustang also had short‑scale bass models. Other examples include parts‑bin oddities like the Swinger and Maverick. Many later experiments were undertaken by the Japanese arm of Fender without any risk to the company’s ‘Made in USA’ standing. Japanese‑only models include the Performer, Katana and the Gibson‑like set neck Flame. Many of these low volume under‑the‑radar guitar models are often described as ‘forgotten Fenders’.

As covered in Part IV of the story, Fender has also sustained a very successful line of guitar and bass amplifiers dating from the late 1940s right through to the current day, including landmark valve amps such as the Princeton, Champ, Bassman and the mighty Twin Reverb (among many others). Like Marshall and Vox from the UK, Fender amps have become synonymous with modern electric guitar music.

The successful honeymoon period for Fender was, however, not destined to last forever. In early 1965, Leo Fender sold his company to the Columbia Broadcasting System (CBS), reportedly for $13m. Despite investment and efforts to diversify the product lines, manufacturing quality varied considerably due to poor management and cost cutting, particularly during the 1970s. Industry reputation and credibility waned and Fender sales suffered significantly, especially in the face of aggressive competition from Japan. One of the strategies adopted by Japanese companies at the time was, despite the existence of U.S. patents, to flagrantly copy American guitar designs. Japanese companies produced large numbers of guitars built to high standards and sold at low prices. This shameless targeting of American products placed an already struggling Fender under considerable pressure. By 1981, Fender had brought in Dan Smith from Yamaha as Marketing Director to oversee selective guitar redesigns and, along with Fender luthier (and founder of the Fender Custom Shop) John Page, to breathe new life into Fender’s fortunes.

After making considerable improvements across the business, 20 years after being sold to CBS, a management buyout was initiated by CEO William Schultz (1926‑2006). In retrospect, Schultz is now widely regarded as ‘the man who saved Fender’. Fender Electric Instrument Manufacturing Company was acquired from CBS by its own employees in 1985 and the newly privatised company was renamed Fender Musical Instruments Corporation (FMIC). The sale did not, however, include the existing Fullerton factory, so Fender was forced to construct a new plant at Corona, California which started limited manufacturing in late 1985.

After two years of restructuring the business, the post‑CBS Fender American Standard Stratocaster was introduced in 1987. While superficially similar to previous models, the American Standard was a significant model that signified the company’s return to form and commercial prosperity. In the same year (1987), Fender set up their in‑house Custom Shop (nicknamed ‘The Dream Factory’), based at their Corona facility in California. The aim of the Custom Shop was to showcase just what Fender’s master luthiers were capable of building.

Fender’s headquarters are now based in Scottsdale, Arizona, with North American manufacturing facilities in Corona, California, and Ensenada in Mexico. Off-shore production of budget Squier guitars and basses is based in Korea and Japan. Fender has continued to innovate, introducing ‘custom shop’, ‘vintage reissue’ and ‘relic’ instruments and a range of electronics to a market hungry to recapture the ‘golden years’ of pre‑CBS Fender instruments and amps.

We have become so familiar with the Fender Telecaster, Stratocaster and Precision, that we sometimes forget just how revolutionary these designs actually were back in the 1950s and what they, perhaps unwittingly, came to represent. Looking a little more broadly helps to put things into context. Loud and brash electric guitars undoubtedly helped to define the musical uprising brought about by the advent of rock ‘n’ roll. At the same time, a western social and cultural transformation was taking place in the wake of post‑WWII austerity and despite prevailing conservative Cold War political paranoia. Affluent and often puritanical middle class values allied to consumers’ relentless drive to satisfy materialistic aspiration were fuelled by media, film and television. Opposing the status quo was a growing urban resentment, an angry youthful rebellion boosted by emerging anti‑conformist liberalism and radical demands for greater personal freedoms. Fundamental change was, arguably, inevitable. The turmoil created in the 1950s began to reshape the fabric of society in both the U.S. and the UK and this, in turn, propelled musical experimentation and creativity at a pace never seen before. Fender’s electric guitars not only enabled that particular wave to be ridden with verve, passion and a certain degree of teenage angst, but also came to symbolise many defining events for a frustrated generation, a subversive movement that would last well into the 1960s. When Marlon Brando was asked the question in the film ‘The Wild One’ (1953), “Hey Johnny, what are you rebelling against?” he retorted disinterestedly “whadda you got?” For a while at least, it was hip to be cool and cool to be hip.

If there are any guitars that qualify for the terms ‘iconic’, ‘classic’ and ‘industry standard’, these original Fender models have to be up there with the best and most enduring industrial design wonders of all time. In particular, the timeless design of the ‘Tele’ and the ‘Strat’ have persisted in the minds of guitarists over many decades, and will surely continue to do so for the foreseeable future.

Those ‘new’ guitars back in the 1950s are now hugely valuable vintage instruments and are part of our collective music heritage. Vintage Fender guitars, basses and amplifiers are much sought after by collectors, musicians, dealers and enthusiasts alike, with many key models originally made prior to the CBS takeover in 1965 now reaching high vintage guitar market values. Authentic vintage instruments associated with successful artists (and with documented provenance) attract an even higher price premium on the collectable market, for instance, Eric Clapton’s famous c.1956 ‘Blackie’, which was sold for $959,500 to Guitar Center at Christie’s in New York in 2005.

Gibson Solid Body Electric Guitars

The history of Gibson guitars is much longer than that of its main current‑day rival Fender and much of this has already been covered elsewhere. The crucial part that Gibson played in this stage of guitar evolution is picked up again here in the mid‑20th Century.

During the 1940s, popular American jazz guitarist, performer and musical inventor Les Paul (1915-2009) – born Lester William Polsfuss – had become increasingly unhappy with the compromises experienced by electric acoustic archtop guitars. In an attempt to overcome the shortcomings, Les Paul had been actively experimenting with guitar design from around 1939. A famous early prototype electric guitar assembled by Les Paul out of hours at the Epiphone factory around 1940 was nicknamed ‘the log’, which was essentially a solid piece of 4”x4” pine timber running the length of the body, providing the base for the strings, bridge assembly and pickups. To make the design appear more guitar‑like, Les Paul attached a traditional guitar neck and two hollow guitar ‘wings’ from an Epiphone archtop on either side of the ‘plank’.

Les Paul had originally approached Gibson as early as 1941 but no interest was shown by the company.  He tried again in 1945 or 1946 and his ideas were once again rejected. It wasn’t until 1950 that newly‑appointed Gibson president, Theodore ‘Ted’ McCarty (1909-2001) brought in Les Paul to act as a consultant in response to Fender’s newly launched solid body electric guitars. Like Leo Fender, McCarty could not play the guitar, so he worked very closely with those who could.

In 1951, Gibson began producing prototypes of a solid body electric guitar designed by McCarty in consultation with Les Paul. One of the many prototype designs (shown following restoration below) is relatively close to the final production in all but detail.

Gibson was already losing ground, and business, following the introduction of Fender solid body guitars that appealed to young musicians exploring new musical ideas. To many consumers, Gibson’s models were seen as staid and, compared to the modernistic Stratocaster, frankly old fashioned, tired and boring. For Gibson, it was important that any sold body electric guitar design would be all‑new while also remaining consistent with the values, quality and reputation of the company. It was also crucial that the new instrument would be quite different from Gibson’s competition, whether existing or emerging. Crucially, before the new guitar was launched, McCarty agreed a deal with Les Paul for it to carry Les Paul’s name on the headstock and for him to be an integral part of Gibson’s advertising campaign.

In July 1952, Gibson launched the now-iconic solid-bodied guitar, the Gibson Les Paul Model, finished in metallic gold, equipped with dual P90 pickups and a trapeze tailpiece similar to those found on the company’s archtop guitars. For a number of years, the Les Paul Model and its variants were the only solid body guitars made by Gibson. The range was extended from the basic ‘gold top’ to the upmarket black and gold Les Paul Custom in 1953 featuring a standard bridge, one P90 pickup and a unique Alnico V ‘staple’ pickup at the neck, a unique design intended to appeal to jazz guitarists.

To broaden appeal, Gibson introduced two affordable slab‑body single cutaway Les Paul models, the Junior with a single P90 pickup in 1954 and Special with dual‑P90 pickups in 1955. These rather utilitarian models retained the body outline but with few of the upmarket features of the carved‑top Les Pauls.

By 1957, the Les Paul’s P90 single coil pickups began to be replaced with Gibson’s PAF (Patent Applied For) humbucking pickup. The process started with the now‑iconic 3‑pickup Les Paul Custom ‘Black Beauty’.

1958 saw the Junior and Special updated to a new double cutaway body and the option of cherry or outrageous TV Yellow, a colour allegedly designed to show up well on black & white TV screens of the time.

Following poor sales of the original Les Paul ‘gold top’ model, the guitar was rejuvenated in 1958 by renaming it the Standard. The Standard’s specification was changed substantially – a cherry sunburst finish was applied to a maple‑capped mahogany body, the PAF pickups became the norm and a tune‑o‑matic bridge and ‘stop’ tailpiece were standardised. Some, but not all, of the tops exhibited an attractive matched 2‑piece ‘flame’ maple top. Around 1,700 of the now‑legendary ‘Burst’ Les Paul Standards were produced between 1958 and 1960 and all have become highly collectable on the vintage guitar market. The original sunburst Standards have become the aspiration of many guitar enthusiasts. These rare instruments are widely regarded as representing the epitome of Gibson guitar’s ‘golden age’.

The Les Paul models weren’t the only new instruments aiming to establish Gibson’s electric guitar credentials. The late 1950s saw a number of new guitar designs including the McCarty‑designed ES-335 semi‑acoustic, which first appeared in 1958. The ES‑335 was significant because of a solid centre block running through the body and on which the pickups and bridge were mounted, essentially much like Les Paul’s ‘log’ experiment. The semi‑hollow body construction was important in reducing acoustic feedback in high gain situations compared to fully‑hollow archtops. Gibson also released a lower cost hollow‑body ES model with dual P90s, called the ES-330 and two upmarket siblings, the ES‑345 and ES‑355.

The late 1950s was a period of intense innovation at Gibson. In addition to the Les Paul and the ES series, Gibson designed two ‘modernistic’ guitars intended to compete with Fender’s popular solid guitars, the Explorer and Flying V, both of which were introduced in 1958. A third ‘modernistic’ series model, the Moderne, was patented and prototypes might have been constructed but no actual verified examples have ever come to light, let alone reached the vintage collector market. The Moderne has become something of a myth and an original 1950s example is seen by many collectors as the ‘Holy Grail of guitar collecting’. Gibson (re‑)issued a Moderne in small numbers in the early 1980s and again occasionally since.

While the futuristic Flying V and Explorer models were well ahead their time, sales of these radical instruments was very poor. In 1958, Gibson sold only 81 Flying Vs and 19 Explorers. The following year (1959), only 17 Flying Vs and 3 Explorers were sold. It is hardly surprising then that both models were withdrawn by 1959-1960. A few further examples were constructed in the early 1960s from parts. As only small numbers of the original release Explorers and Flying Vs were made, they have become very highly sought after and valued. Gibson, however, would return to these original designs and has successfully reissued both the Flying V and Explorer many years later.

Like Fender, Gibson recognised that they had to cater for the lower end of the market in order to attract new and younger players to the fold. In order to make budget guitars accessible without affecting sales of their premium models, Gibson introduced a range of simple low cost ‘student’ guitars, called the Melody Maker, from 1959. The basic Melody Makers, featuring distinctive narrow headstocks, slab bodies and all‑new Fender‑like narrow single coil pickups, were produced in large numbers at Gibson’s Kalamazoo plant alongside the classics. The Melody Maker’s body shape went through four incarnations during its lifetime, with only 2 bearing a similarity to existing Gibson electrics. Although the Melody Makers proved very popular and sold in large numbers, they were nevertheless withdrawn by 1971. Gibson has re‑used the Melody Maker name on a number of occasions since the original models.

Despite the now‑legendary reputation of the Les Paul Standard, sales of the model remained relatively stagnant and, in 1961, Gibson were forced to take action. Effectively, production of the Les Paul ceased and a new design was introduced in 1961, even though it retained the ‘Les Paul’ moniker.  The new model was another design shift with a thin double cutaway mahogany body with contoured upper bouts and pointed ‘devil’ horns. Allegedly, Les Paul didn’t favour the guitar’s design and no longer wanted to be associated with it. In addition, Les Paul separated from his wife Mary Ford and the divorce settlement may also have been a pecuniary factor in his decision to drop his name from the guitar. By 1963, after Les Paul’s name was removed, the model was re‑designated the Gibson SG (standing for ‘Solid Guitar’). The Gibson SG has remained in continuous production since 1961 and, ironically, it has become the company’s most commercially successful model in Gibson’s long history. Like the single cutaway Les Paul before it, the SG model came in a number of variants, the single‑P90 Junior, the dual‑P90 Special, dual‑humbucker Standard and 3‑humbucker Custom.

The single cutaway Gibson Les Paul may have gone but it was not forgotten. It reappeared in 1968, and then only after second hand guitars became popular at around the time of the British blues explosion, led by guitarists such as Eric Clapton and Peter Green, as well as other contemporary musicians of the time, including Jeff Beck, Jimmy Page and Paul Kossoff. The Les Paul has had numerous variants over the years including notable models such as the Les Paul Deluxe, Professional, Recording, Artisan and Studio models, and many guitarists have had signature models released to celebrate the artists’ association with the company.  Since its reintroduction in the late 1960s, the Les Paul has remained in continuous production and, along with the Fender Stratocaster, it has become one of the most recognisable design icons of modern‑day guitar music.

Gibson continued to innovate into the early 1960s, introducing more convention‑busting designs. McCarty, hired famed car designer Ray Dietrich (1894‑1980) to cash in on the American automotive craze of the time. The new model was called the Firebird, which featured a more rounded‑off Explorer‑like outline, through‑body construction and rear‑facing banjo tuners. These first Firebirds, produced in 1963‑1964, were known informally as ‘reverse’ bodied because the upper treble bout was more pronounced than the bass bout. Again, due to poor sales and high manufacturing costs, Gibson simplified the fundamentals and ‘flipped’ the body to produce the ‘non‑reverse’ Firebird, made between 1965 and 1969, when it was withdrawn. As with many of other unsuccessful early Gibson solid body designs, the company has reissued the Firebird in both ‘reverse’ and ‘non‑reverse’ formats since. Other variants were made including the 12‑string Firebird XII and the Thunderbird bass.

McCarty stood down from Gibson in 1966 and became president of Bigsby Guitars. McCarty later collaborated with, influenced and mentored up‑and‑coming ambitious American luthier Paul Reed Smith of PRS Guitars. Smith honoured McCarty’s contribution to guitar building by dedicating him with a PRS McCarty model. McCarty died in 2001 at the age of 91.

As with competitors, Fender, Gretsch and Rickenbacker, the 1970s was a period of controversial experimentation while under ‘corporate’ ownership. Gibson produced many other solid body electric guitars than have been mentioned so far. Among the many ‘forgotten Gibsons’ of the period, there are some notable examples, including the Challenger, Corvus, Firebrand, Invader, L6-S, Marauder, RD series, S‑1, Sonex‑180 and the Victory.

While Gibson may have had considerable success with guitars, it has never quite found the same formula for basses, amps and acoustics as some of its competitors, including Fender. That doesn’t mean to say they haven’t made notable examples; they have, it’s just that they haven’t had the popular impact and longevity to warrant mainstream success alongside the recognised ‘classics’.

After McCarty’s departure, Gibson came under increasing commercial pressure. Things came to a head in 1969, when Gibson’s parent company, Chicago Musical Instruments Ltd (CMI) was taken over by a South American brewing company called ECL and then became a subsidiary of Norlin Musical Instruments in 1974. In the same year, Norlin shifted production of Gibson guitars from its long‑term home in Kalamazoo, Michigan to Nashville, Tennessee. In 1984, Gibson finally closed its old factory at Kalamazoo.

Following a similar pattern to Fender’s travails at the time, Gibson underwent a period of poor quality control and severe financial difficulties, often blamed on corporate interference by executives who knew little about, and cared little for, the company’s pedigree and its customer base. Ultimately, as happened with Fender, the company returned to private ownership in January 1986 to focus on its core business. The Gibson Guitar Corporation was close to liquidation when it was bought by three businessmen, Henry E. Juszkiewicz, David H. Berryman and Gary A. Zebrowski. Under the new management, the business was once again repositioned as a maker of high quality professional musical instruments.

While production of Gibson’s sold body guitars remained in Nashville, further production plants were also opened in Memphis, Tennessee (1984) for semi‑hollow models, as well as Bozeman, Montana (1989) for acoustic guitars. After having bought out its main American competitor Epiphone in 1957, Gibson strategically repositioned Epiphone as a budget brand and relocated production of Epiphone guitars to Japan in 1970 and then to Korea in 1983, mainly producing low‑cost versions of famous Gibson models.

In order to cater for the more exclusive end of the market, Gibson produced select instruments under an in‑house Custom Shop operation. Juszkiewicz built on the internal Custom Shop operations, the roots of which date back to around 1984 (3 years before Fender established its Custom Shop), and which became a separate facility based in Nashville from October 1993.

The Gibson Guitar Corporation, still a private company, has its headquarters based in Nashville, Tennessee and continues to develop and produce high quality instruments into the 21st century. However, it hasn’t all been plain sailing for Gibson. In May 2018, after a period of unsuccessful diversification into peripheral consumer electronics products and rapidly rising debts, Gibson entered Chapter 11 bankruptcy protection in the U.S. The widely anticipated move was intended to give the company sufficient time to restructure the business, with Henry Juszkiewicz still as CEO. Gibson intends to focus on profitable core musical instrument products, while divesting itself of the remainder of its ill‑fated and loss‑making lifestyle ventures. It is likely that Gibson’s rationalisation programme will succeed and the company will avoid liquidation. Like the phoenix symbolised on its Firebird guitars, Gibson will surely rise again from the ashes and achieve long‑term financial security.

Many vintage Gibson solid body electric guitars are highly regarded by collectors, musicians and enthusiasts alike, with many key models reaching high or very prices on the vintage guitar market with the 1959 sunburst Gibson Les Paul Standard is held in particularly high esteem. It will be interesting to see if a resurgent Gibson will be able to recapture the pinnacles of past glory. Watch this space…

Other Major American Electric Guitar Brands

While it might seem from the previous two sections that Fender and Gibson were the only companies responsible for all the key milestones in the solid guitar’s evolution, this is in fact far from reality. There have been innumerable manufacturers from around the globe that have been highly influential in shaping the market.

Epiphone – Epiphone’s illustrious history dates back to 1873 when the Stathopoulo family emigrated from Greece, via Turkey, and arrived in New York in 1903. The family set up a business in America making banjos and mandolins. By the end of WWI, the company became ‘The House Of Stathopoulo’, then changed its name to the ‘Epiphone Banjo Company’ in 1928, the same year that they started producing acoustic guitars. The name Epiphone derived from a combination of owner Epaminondas Stathopoulo’s nickname, ‘Epi’, and the Greek word ‘phon-’ meaning ‘sound’ or ‘voice’. In addition to musical instruments, Epiphone started producing amplifiers in 1935. Epiphone was Gibson’s main competitor in the production of high‑quality instruments, particularly archtop guitars in the 1930s and 1940s, such as the De Luxe, Broadway and Triumph models. It was only after World War II that Epiphone began to struggle, eventually resulting in its acquisition by Gibson in 1957. Initially, the new generation of Epiphone guitars were still made in Gibson’s American facilities, even though many of their instruments were re‑branded Gibson models. During the 1960s, Epiphone’s Casino, which was effectively their version of the Gibson ES-330, became particularly famous because of an association with English pop/rock band The Beatles. In recent decades, the Epiphone brand has come to represent the affordable end of Gibson’s output, complementing the parent company’s product lines. In the early 1970s manufacturing was migrated to the Far East, first in Japan, then Korea and, since 2004, Epiphone guitars have been made in a dedicated factory in Qingdao, China. Other well‑known model Epiphone names from their past include Emperor, Riviera, Sheraton, Olympic, Wilshire and Crestwood.

Gretsch – Another famous manufacturer with a long history dating back to 1883 is Gretsch. The company was founded by Friedrich Gretsch (c.1856-1895). Gretsch arrived as a 17 year old German immigrant to the United States in 1872. By 1883, aged 27, Gretsch was manufacturing banjos, tambourines, and drums from a modest shop in Brooklyn, New York. It wasn’t until the big band era of the 1930s that guitars became part of Gretsch’s core business with models like the Synchromatic and Electromatic. Gretsch became hugely successful with the explosion of blues, country and rock ‘n’ roll music in the 1950s. The man behind many of Gretsch’s iconic designs including the flamboyant White Falcon was guitarist Jimmie Webster (1908‑1979), who worked as sales and demonstration representative for Gretsch. NB. Webster was known as the inventor of the ‘Touch System’ of playing in the 1950s, popularised by Van Halen as ‘two‑hand tapping’ in the late 1970s. The demand for Gretsch guitars during this period enabled Gretsch to compete head on with Gibson and Fender. Gretsch’s association with guitarist Chet Atkins propelled their now‑iconic 6120 from 1955 to massive popularity. Like many other companies in the 1960s, Gretsch struggled and was bought out by Baldwin Pianos in 1967. By 1981, after a period of significant decline Baldwin finally wound up production of Gretsch instruments. Fred W. Gretsch purchased the brand name in 1985 and several attempts were made to restart production, including manufacturing in the Far East. Gretsch has been under Fender patronage since 2002 with Fender having the controlling interest and the Gretsch family retaining ownership. A rejuvenated Gretsch company, with Fender’s support and endorsement from rockabilly guitarist Brian Setzer has, once again, become successful. Well‑known model Gretsch names from their history include the White Falcon, Country Gentleman, Tennessean, Viking, Anniversary, Jet and Corvette, often carrying obscure and confusing numerical model numbers.

Rickenbacker – Rickenbacker’s history is shorter than some of its competitors and has been widely covered in other parts of the guitar’s story. Rickenbacker only emerged in the early 1930s first as Ro‑Pat‑In then as Electro before formally adopting the Rickenbacker name. Rickenbacker was crucial in the early development of the electric guitar. However, it wasn’t until the late 1950s that Rickenbacker’s fortunes found a new lease of life and took a major upturn that would lead to the current day. In 1953, Adolph Rickenbacker sold his company to music industry businessman F.C. Hall (1909‑1999), founder and CEO of media company Radio-Tel. Under Hall’s ambitious leadership, the company introduced a number of innovative guitar models, which proved popular with many bands during the nascent rock ‘n’ roll era. In an inspired move, Halll hired illustrious guitar maker Roger Rossmeisl (1927-1979) in 1954. Rossmeisl was responsible for the design of Rickenbacker guitars including a number of iconic instruments released in the late 1950s, including the ‘Capri’ 300 series guitars from 1958 and the equally influential 4000 series basses from 1957. Both of these designs, along with a number of others, are still in production today. Rickenbacker’s artist association with, particularly, The Beatles and The Byrds in the 1960s, cemented the brand’s rightful place in guitar history.

Danelectro – While it may not be an obvious choice for coverage, it is worth mentioning Danelectro. The company was founded in 1947 by Lithuanian immigrant Nathan ‘Nat’ Daniel (1912-1994) and based in New Jersey. The company started out by making guitars, basses and baritones for other companies including Silvertone models for the Sears & Roebuck department stores and mail order, and Airline models for Montgomery Ward. The strategy enabled Danelectro to start making guitars using its own name by 1954. Daniel innovated by using unorthodox materials and construction techniques, at least hitherto unusual in the guitar building industry. The resulting instruments have a distinctive look and sound that also enabled the company to produce no-frills instruments at competitive prices for the mass market. In a clever move under the Silvertone brand, they produced guitars with a valve amp built into the guitar case, so customers could buy everything they needed in one convenient, portable package. The brand is important historically because it enabled many young aspiring musicians to buy instruments at low cost. The unique approach also attracted many professional players to use Danelectro instruments, including guitarists like Jimi Hendrix, Rory Gallagher, Jimmy Page and Beck. Like many other American companies, including Fender and Gibson, Danelectro struggled in the 1960s and was sold to industry giant MCA in 1966, only for the factory to be closed down in 1969. The brand was resurrected and started making guitars again in 2006.

PRS – Compared to some of the well established brands that have been around much longer, PRS Guitars is really the new‑kid‑on‑the‑block, founded by American luthier Paul Reed Smith in Annapolis, Maryland in 1984. In a relatively short period of time, PRS has gained an enviable reputation for high quality instruments and amps, cleverly finding a niche in the market that is different from their competitors. Taking design influences from Fender and Gibson amongst others and adding something new and fresh of their own, PRS managed to build substantial market share rapidly from seemingly nowhere.  Having guitarist Carlos Santana on board from the start and bringing in ex‑Gibson president Ted McCarty as Smith’s mentor didn’t harm the company’s credibility either. PRS introduced stunning instruments, starting with the Standard and Custom, recognised for their immaculate craftsmanship. Many PRS instruments have distinctive features including exquisite highly figured tone woods, superbly engineered hardware and distinctive unique ‘bird’ fingerboard inlays. The company grew swiftly; relocating to a major new American factory in 1996 and from 2003 PRS established a range of more affordable SE (standing for ‘Student Edition’) models manufactured in Korea. PRS’s success demonstrates that the industry’s barriers to entry are not insurmountable and with the right strategy, it is still possible to enter the market and to grow market share despite well‑established competition, and without being straightjacketed by historical constraints.

Other Guitar Brands From Around the World

Guitar design, production and sales are not restricted to just a few large American companies. In America alone, there are many thousands of guitar manufacturers past and present. Many names will be familiar, such as Ernie Ball/Music Man, Peavey, Guild, Jackson, Dean, BC Rich, Ovation, Supro, National, Kay, Harmony, etc., through to innumerable custom and boutique luthiers. Some of these manufacture instruments in the U.S. while others are American companies that source part or all of their guitars from the Far East. A quick look around the globe highlights many other fertile guitar making territories…

Europe – Particularly following World War II when embargoes and tight trade restrictions limited exports of guitars from America, a combination of high demand for guitars and low supply provided an opportunity for some enterprising European companies to fill the gap. Many of these guitars followed the influence of American designs in the knowledge that young people in Europe aspired to emulate their American counterparts. Britain and continental Europe have produced many guitar brands over a long period of time including from illustrious companies such as Burns, Duesenberg, Eko, Framus, Hagstrom, Höfner, Hohner, Patrick James Eggle, Shergold, Gordon Smith, James Trussart, Vigier, Vox, Warwick, Watkins, Zemaitis, etc.

Far East – The Far East isn’t only responsible for producing low cost guitars for American and European guitar brands. During the 1970s, Japanese firms were producing affordable, high quality copies of American guitars, taking advantage of high labour prices and poor quality control in the U.S. However, there has also been a notable history of guitar manufacture in its own right, including some very quirky and idiosyncratic models. Many of the big names from Japan include, Aria, ESP/LTD, Ibanez, Italia, Teisco Tokai, Yamaha, etc.

Eastern Bloc – While not widely recognised as a guitar‑making region, largely because of its nationalistic political regime and economic protectionism, the Eastern Bloc countries have produced a diverse range of instruments over an extended period of time. There is a vast array of models bearing many unfamiliar names such as, Aelita, Formanta, Jolana, Migma, Tokina, etc.

As you might expect, the fascination with the world’s favourite instrument is genuinely global and they have been made in every corner of the world, including Australia, Canada, South America and, to a lesser extent, the middle east (where the guitar’s story began after all!) and Africa.

Other Factors

Although this section focuses on electric guitar production, it is worth remembering that acoustic guitar manufacturing is also thriving in the 21st Century with famous specialist brands such as Martin (based in Pennsylvania since 1833) and Taylor (based in California since 1974) at the forefront of innovation and technological development. Of the major American electric guitar makers, it is only really Gibson that also has a reputable range of professional acoustic instruments. Elsewhere, Yamaha has a strong range of Far Eastern acoustic guitars. There are numerous other manufacturers to be found producing fine acoustic guitars at all price points in the market.

The 21st Century landscape of guitar production is one of global diversity and differentiation. Modern guitars may have been hugely influenced, if not defined, by a small number of American companies but it is by no means a monopolistic industry; quite the opposite in reality. The long‑term viability of guitar making is inextricably linked to the music industry and what happens will rely heavily on musical trends and influences.

There have been many challenges to the dominance of the electric guitar, notably during the 1980s and 1990s with proliferation of synthesizers and in the 2000s as home production of electronic music became affordable and accessible. However, the popularity of the guitar seems (relatively) assured, despite many cynical commentators regularly proclaiming ‘the death of guitar music’. Digital technology is bringing a new challenge to guitar makers, so it will be up to countless luthiers around the world to rise to the challenge, seek new opportunities, adapt the guitar and make it truly a universal instrument and secure its future success for generations to come.

End of Part VI

Over these last six instalments, I have covered the guitar’s history from its vestigial beginnings in the ‘Cradle of Civilisation’ to the birth and proliferation of the electric guitar. There is just a little of the long and winding path left to travel and I hope you’ll join me for the remainder of the story. The next article has yet to be written, due to personal circumstances. While I hope to publish it next month, it is by no means certain. Fingers crossed. Until next time…

CRAVE Guitars ‘Quote of the Month’: “Contrary to popular opinion, great minds most definitely do not think alike. Similarly, great musicians do not play or sound alike.”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

August 2017 – A Peak into the Pandora’s Box of Guitars

posted in: Observations, Opinion | 0

Over the last 30 months or so, I’ve been going on and on about the mainstay of CRAVE Guitars ‘work’, which is to share with you not only stuff about music and stuff about guitars generally but also specifically stuff about Cool & Rare American Vintage Electric Guitars. If you’ve taken a look at the web site, you’ll know that the focus tends to be on mainstream U.S. brands and, within that, if possible, some cool variations of well-established guitar models. However, perhaps stating the bleeding obvious, the guitar world is much bigger than that.

This month I’m dipping a toe in the water of some of the other guitar treasures out there. When one looks across the whole guitar landscape, antique, vintage, old, used, new, American, European, Eastern bloc, Asian, mass manufacture, boutique makers, unique luthiers, home‑made, traditional, basic, hi-tech, innovative and whacky, there is infinite variety and a veritable cornucopia of interesting and wonderful instruments to appreciate. The same goes for amps and effects of course (as colleagues into those things keep reminding me) but there’s not enough room in a single article for those as well. Besides, although I don’t claim to be an expert on guitars, I’m even less well‑acquainted the minutiae of amps and effects – that’s another ballgame altogether. The focus of this article is essentially on electric instruments.

When researching this article, it became ridiculously clear that I simply can’t do justice to every aspect of this enormous topic. I can only mention a figurative iceberg’s tip of what’s out there and I apologise in advance for the probable monumental omissions herein. Before we get going, none of the guitars covered in this article are part of the CRAVE Guitars’ family. In order to illustrate the diversity, I’ve resorted to using pictures sourced from Google Images – I acknowledge all guitar owners and photographers.

Let’s face it, love them or loathe them, the centre of the guitar universe remains occupied by the American ‘Big Two’, Fender and Gibson, along with their subsidiary companies including, respectively, Epiphone and Squier that concentrate on the budget end of the market. Incidentally, Fender and Gibson also own a number of other iconic brands that come under their wing. For instance, did you know that Fender own Gretsch, Jackson, Charvel, DeArmond and Tacoma, and Gibson own Baldwin, Kramer, Steinberger, Tobias and Wurlitzer? Until the mid-2010s, Fender also owned Guild and Ovation guitar brands.

It would be easy to fall into the trap of thinking that Fender and Gibson are massive multinational industrial giants, but in actuality, they are pretty modest business concerns compared to the sheer scale and scope of some truly global companies. Fender and Gibson are, above all, very successful brands with a strong identity, whose reach extends well beyond the music industry. This general public awareness helps to shield them from some of the economic, social and technological pressures facing them. Business fortunes, however, go in cycles and the ‘Big Two’ have had their ups and downs. Both companies, along with many others, were taken over in the 1960s, leading to a period of corporate complacency and weakness that opportunistic competitors were able to exploit. While they have been able to rejuvenate their image, they are now dealing with a radically different global context.

While the ‘Big Two’ are fortunate to have genuinely iconic products including Fender’s Stratocaster, Telecaster and Precision bass, and Gibson’s Les Paul, SG and ES-335 (among others), this otherwise enviable position can also constrain them operationally. It has proved very difficult for them to innovate and stretch too far from the proverbial straightjacket imposed by their core instruments. Existing models are scrutinised minutely and often face intense criticism if they move away from the accepted recipe. At the same time, it is difficult for them to introduce all-new models, as they are often compared unfavourably with the classic mould. Without sustainable growth in a finite market, these companies are commercially vulnerable and their potential success is increasingly limited by their past. This strategic conundrum for Fender and Gibson actually creates fertile ground for other smaller firms to grasp opportunity to enter the market through differentiation, diversification and innovation, as well as imitation.

Circling around the ‘star’ of the Big Two, there are the other recognisable brands such as Rickenbacker, Danelectro, Guild, Ovation, Music Man (now part of the Ernie Ball corporation), G&L, and, as well as the aforementioned Gretsch (the Gretsch family retains major influence as part of Fender) and relative newcomers such as PRS. There are other companies that don’t immediately spring to mind but which have enormous presence in the industry. I include Peavey here, as one of the world’s largest musical manufacturing company. Then there are the other recognisable ‘independent’ American manufacturers that tend to focus on niche markets, such as BC Rich, Dean, Jackson, Alembic, Carvin, Schecter, Steinberger, Suhr, Parker, Heritage, etc. At the same time, some major US guitar companies focus predominantly on acoustic guitars, such as Martin and Taylor.

There is an incredible history surrounding brands that have either disappeared completely or those that have gone, some of which have now been resurrected, e.g. Supro, Airline, National, Dobro (acoustic, now part of Epiphone), Bigsby, D’Angelico, D’Aquisto, Silvertone, Kalamazoo, etc. American guitar manufacturers suffered particularly badly in the 1960s and 1970s as a result of multiple pressures including falling production quality, increasing manufacturing costs (including union labour), and hostile competition from high quality cheap imports from the Far East.

As you might expect, the history of many of the brands already mentioned goes back to the early-mid 1900s (or even further), which means that there are plenty of very cool vintage guitars floating around. In the guitar world, age doesn’t mean valuable – it is the combination of age, rarity, quality originality and current condition that matter for those with an eye on the dollar value. While the Big Two tend to command the premium prices, pretty much across the board, there are plenty of bargains to be had by looking more broadly at these, sometimes ephemeral makes. I recently come across an early 1960s U.S. Airline in all‑original clean condition that went for a little over £300GBP. These never were top‑of‑the‑range instruments back in the day, and they can be picked up as bargain vintage instruments now. Some of these leftfield guitars present low-risk options for entry into the vintage market if you research carefully and don’t expect too much. History suggests that, in all likelihood, they won’t accumulate vintage value very quickly without major artist association. Look around and there are gems to be found from under-the-radar guitar makers. Some are very nice, including Washburn, Hondo (mainly copies), Mosrite, Harmony, Kay, Valco (maker of a number of other brands), etc.

Moving away from the American continent, Europe also has a long tradition of great musical instrument manufacture, with brands such as Vox, Höfner, Baldwin, Burns, Watkins, Framus, Hagstrom, Hohner, Shergold, Hoyer, Wandre, Bartolini, Levin, Goya, Welson, along with newer entrants such as Warwick, Duesenberg and Vigier, Some of these were prolific during the ‘golden years’, capitalising on the rapidly moving musical paradigms of the 1960s and 1970s. A post-war embargo on American guitar imports certainly helped European brands (and bands) get a foothold and to prosper up to the early-mid 1960s. While, as in other markets, the quality of European guitars varied considerably, many models have become synonymous with the period and, as a result, highly collectable, for instance, the teardrop Vox guitar used by Brian Jones of The Rolling Stones or the Höfner violin bass used by Paul McCartney of The Beatles.

Even further away from America, the Japanese companies competed head on with the American brands in the 1970s. Plenty of the budget guitars were blatant copies of American guitars, which resulted in protracted litigation to protect U.S. patents and trademarks. Many ‘older’ guitarists may remember copies from the likes of CSL and Columbus, as well as Ibanez. Japanese firms didn’t just replicate American designs; some also produced original designs and have retained a credible reputation over time for quality and consistency, including their dominant brands – Yamaha and Ibanez. Takamine, which focuses predominantly on acoustic guitars, is also Japanese. There have been plenty of Japanese names that are or have been familiar, including ESP (and subsidiary LTD), Roland, Italia, Aria, Tokai, Teisco, Greco, Guyatone, Apollo, Kawai, Kent, Westone, etc. Many of the instruments made by Japanese companies in the 1960s and 1970s (including some copies) are now becoming very collectable in the off‑the‑beaten‑track vintage niches. If you want some truly whacky vintage designs at reasonable prices, take a look at Japanese guitars. Plenty of people now specialise in conserving these vintage Japanese/Asian instruments.

The old Eastern Bloc countries have also produced a wide range of brands catering for home-grown musicians. The strategy of government-owned manufacture was partly nationalistic, in that they were required to protect their home market from capitalist imports from both the west and east. Many of these guitars were typically utilitarian with little in the way of flamboyance. Many of these brands will be little known in the western world, even now. As you might expect, there are experts who concentrate on collecting these communist bloc guitars for posterity. The ones that have penetrated the western markets offer something different from, and cheaper than, the mainstream names. Look out for names like Aelita, Elgava, Formanta, Migma, Musima, Odessa, Stella, Tonika, Marma (East Germany), Jolana (Czechoslovakia), etc.

There are a few other territories that have developed their own guitar manufacturing, including Godin and Eastwood in Canada and Maton in Australia. In addition, there are a large number of unmarked guitars out there with no means of identifying age or source. Some can be traced back to similar designs by known manufacturers while the creators of others are lost in the mists of time and geography. These ‘pawn shop’ guitars are often poorly made and may be considered curios, although, there are aficionados looking to conserve the more vernacular heritage.

The modern-world picture is far more complicated and can’t be talked about in terms of familiar regional territories. Some multi-national companies, including Fender and Both Fender and Gibson have their headquarters in the US and produce large numbers of their subsidiary ranges in other countries. Some brands are designed in the US and constructed offshore. Some are assembled and quality checked in the US from parts made elsewhere. Larger companies have international distribution operations that channel product to dealership networks within economic regions, e.g. Fender UK servicing the European Union (at the moment!). Others have to manage distribution through networks of independent dealers. Some smaller companies have to rely either on local markets or alternative methods of distribution, direct or indirect. Some companies make instruments that are branded by one or more retail chains. A classic example is Silvertone whose instruments were made by Danelectro, Kay and others, sold through Sears & Roebuck department stores and mail order (remember that?). Similarly, many of the diverse Japanese brand names were actually made by a relatively small number of manufacturers, e.g. Kawai and Teisco.

Another feature of new millennium guitar building is the explosion in bespoke guitar building, either by small specialist companies or individual luthiers. Low volumes, creative designs, alternative materials, custom features, and high quality tend to characterise the sub-industry but there are always exceptions to the rule. There have, pretty obviously, always been bespoke builders catering for the well‑heeled or professional musicians’ need and this has led to further opportunities that are difficult for the mass manufacturers to match. In response, the larger manufacturers, including Fender and Gibson, created custom shop operations to provide tailored services for individual clients. Custom shops also heralded the explosion in vintage-styled recreations and the more recent craze for relic finishes, both building on the growth of interest in vintage guitars.

Remember, even the (now) big companies had to start somewhere, usually with an inspirational leader, visionary pioneer or commercial entrepreneur at the helm, often working on their own or in a small workshop. Many of today’s big brands started out with some names you might just recognise, including Friedrich Gretsch and son, Fred Gretsch Jr, Orville H. Gibson, Christian Frederick Martin, Adolph Rickenbacker, Nathan Daniel (Danelectro), Epaminondas Stathopoulo (Epiphone), and one Clarence Leonidas ‘Leo’ Fender. More recently, Paul Reed Smith has earned a place amongst this exlusive group. Even these industry giants relied on other key individuals and their skills including John Dopyera, George Beauchamp, Lloyd Loar, F.C. Hall, Les Paul, Ted McCarty, George Fullerton, Ray Dietrich, Roger Rossmeisl, etc.

Other well-known names span out of larger companies, for instance, Travis Bean, well known for metal-neck guitars, split from Kramer. Kiesel Custom Guitars is another example, producing some astounding instruments having been formed following the splitting up of American company Carvin in 2015. Perhaps the most successful modern entrepreneur is Paul Reed Smith of PRS Guitars, based in Maryland USA since 1985. While growing his reputation, Smith wisely sought advice from Gibson’s ex‑president Ted McCarty to mentor him, and several PRS models now proudly bear McCarty’s name. The tradition continues with renowned luthier Joe Knaggs setting up his own prestigious guitar company after leaving PRS, producing some wonderful instruments in relatively small numbers.

One of the most celebrated and influential craftsmen to exploit niche demand in the 1960s was Lithuanian immigrant to the UK, Tony Zemaitis who made some very remarkable guitars for some very remarkable guitarists. Zemaitis’ legacy can clearly be seen in other current models from the likes of Duesenberg and Teye, as well as the Japanese company that currently carries on Zematis’ illustrious name.

There have been many excursions into the application of alternative materials to wood. The use of metal in guitar production was pioneered by the likes of National and Dobro in their resonator guitars as a means of producing more volume from acoustic guitars in the pre‑electric era of the 1920s and 1930s. In the 1960s, Valco used fibreglass (coined Res‑o‑Glas) for futuristic designs in the 1960s, such as the stunning National Newport. More recently, acoustic maker, Ovation, used a variation of fibreglass (lyrachord) on its bowlback instruments. Zemaitis experimented with other materials in his guitar construction and many others have followed suit, including the aforementioned Kramer/Travis Bean. Around the same time, there was a ‘fad’ for acrylic guitar bodies, perhaps the most well-known proponent being Dan Armstrong who used acrylic for parent company Ampeg.

On this side of the Atlantic, another luthier has set the bar for innovative use of metal; French luthier, James Trussart, Italian company XoX Audio are making some nice instruments out of carbon fibre. 3D printing also presents opportunities for greater use of plastics and metals in guitar production. Some luthiers have experimented with stone as part of the construction but it is not common – or very practical. With ever increasingly stringent restrictions on sourcing, use, sale and movement of hardwoods commonly used in guitar production, expect wider use of alternative sustainable materials in the future.

There are hundreds if not thousands or even tens of thousands of guitar makers out there, all wanting a proportion of the overall demand for great guitars. Here are a very few notable names from all around the world to keep an eye on, including (in no particular order); Collings, Stone Wolf, Flaxwood, Palm Bay, Hutchinson, Emerald, Ed Roman, Suhr, Mayones, Nik Huber, Matt Artinger, Tom Anderson, Patrick James Eggle, Fano, Gus, Goulding, Prisma, Frank Hartung, Michael Spalt, Michihiro Matsuda, TK Smith, Rick Toone, Carillion, McSwain, John Backlund, Reverend, Ron Thorn, John Ambler, Mule, Tony Cochran, Walla Walla, Ezequiel Galasso, Langcaster… The list could be endless as there are just too many great guitar buillders out there to mention and apologies to those I’ve left out and, sorry, I can’t post pictures of every one – I wish I could. The point, I guess, is to broaden one’s perspective and perhaps open one’s mind to a wide range of other possibilities beyond the obvious in-your-face guitar shop fare. I don’t usually proffer advice but on this occasion, I would simply just say, take a look out there and you might just find something weird and wonderful that you probably didn’t know existed. I regularly feature some of this wonderland of goodies on Twitter for those that may want to take a look (@CRAVE_guitars).

For the amateur hobbyist or artisans with aspirations of becoming the next notable designer, there are now plenty of DIY kits for everything from generic product to some quite fancy customised guitar construction. Access to information the Internet provides plenty of plans and specifications for people to design and build almost any type of instrument without the need to track down books or luthiers willing to share their knowledge. Experimenting in this way can present all sorts of opportunities to be taken. What about you?

Renovation ‘husk’ projects are probably best avoided unless you really know what you’re doing, as there’s probably a reason why they are in that state to begin with. For some, though. a ‘bitsa’ guitar may make an ideal low cost player’s guitar. My lack of practical skills prevents me from trying out a DIY (re-)build beyond my limited capabilities. Besides, given CRAVE Guitars’ fundamental raison d’être, I simply can’t create an authentic American vintage guitar.

I hope that this article has given a tiny indication of the beauty and multiplicity of guitars out there. That’s without going into oddities with unconventional string configurations, double (or more) necks, hybrid instruments, etc. It is this fascination with making things different while also keeping things the same that is quite inspirational and, I think, pretty unique to guitars, at least on this sort of scale. We are blessedly spoilt for choice and there are some ridiculously good guitars out there for very reasonable prices without experiencing the diminishing returns associated with esoteric exotica. Ultimately, this clearly indicates that there is something for everyone with an interest in the world’s favourite musical instrument.

So… you may ask… what’s my favourite out of everything covered here? Truthfully, I can’t say; I find guitars endlessly beguiling and preferences vary continuously. It would be unfair to single any one brand or model from the others. As my obsessive quest for ‘Cool & Rare American Vintage Electric Guitars’ continues, the CRAVE name gives a hint of bias but that is not so dogmatic that I can’t appreciate all aspects of the luthier’s art and craftsmanship. MY position is firmly ‘on the fence’. If any of the names mentioned wish to persuade me off the fence with a prime example of their product(s), I am more than happy to accommodate them (f.o.c. of course!). I optimistically await a swathe of e-mails to that effect (hint, hint).

Me? I’m off to plink a new CRAVE Guitars’ plank. The new addition to the family is something both very recognisable and very unusual at the same time. All being well, I’ll try to cover it in next month’s article. All I’ll say at this juncture is that it is definitely one that fits the Cool & Rare American Vintage Electric Guitar bill very aptly while also strongly dividing opinion. Intrigued? The lengths we go to, to bring you guitar ‘stuff’. Watch this space…

CRAVE Guitars ‘Quote of the Month’: “There is a finite limit to the amount you can know, there is no limit to the amount you can imagine.”

© 2017 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?